#Spinning

2011-11-22

Oerlikon Textile restructures Organization and moves Management to Shanghai

The Oerlikon Group will simplify its Textile Segment to further increase competitiveness and profitability. In line with the new organizational structure, Clement Woon, an internationally experienced executive will succeed Thomas Babacan as Segment CEO on 1 January 2012.

The three key elements of this change are

- the consolidation of the five Textile machinery and components businesses into three Business Units (BUs), - the relocation of Textile’s headquarters to Shanghai, and - increased R&D investment in both Germany and Asia to around CHF 80 million.

Oerlikon’s CEO, Dr. Michael Buscher, said: “We have seen strong improvement in our Textile business, resulting in record margins. With the announcement today we are positioning the Segment even closer to our largest customers, consistent with our strategy to further increase efficiency and profitability. I would like to thank Thomas Babacan for his dedication to Oerlikon and welcome Clement Woon to the company.” Today’s announcement supports the continuation of the focus on operational discipline, lifting the underlying performance of Oerlikon Textile to a new level, building on an already strong market position in Asia.

The refocusing of Oerlikon Textile comprises three key elements:

- Simplified organization with consolidation from five BUs to three A new Manmade Fibers BU will comprise Oerlikon Barmag and Oerlikon Neumag. The new Natural Fibers BU will consist of Oerlikon Schlafhorst and Oerlikon Saurer. The structure of the Textile Components BU remains unaffected by the realignment. Branding will not change. - Shift of key Oerlikon Textile management to Shanghai Oerlikon Textile Executives, including the CEO and CFO, will relocate to Shanghai in the first quarter of 2012. By end of 2012 more than 40 % of all Textile senior management positions will be based at Oerlikon’s new office in Shanghai.

- R&D investments in Germany and China Oerlikon Textile will increase its 2012 R&D investment in Germany to around CHF 60 million (worldwide to around CHF 80 million) and start ramping up R&D capacity in China. The German R&D organization will focus on the continued development of ground breaking innovations such as the recently launched Autocoro 8 from Oerlikon Schlafhorst. The Asian R&D capability will specialize in regional adaptation.

After successful contribution over many years, Thomas Babacan will hand over his management responsibilities as Segment CEO to Clement Woon (52, a citizen of Singapore) on 1 January 2012 and leave the company.

Clement Woon, an executive with extensive international experience, particularly in Asia, has a strong background in both the technology and service industries. He will be Oerlikon’s first Segment CEO based in Asia. The position of Oerlikon Group COO will be eliminated. With a presence in this region for almost 50 years, Oerlikon Textile’s sales in Asia will reach around 70 % of total sales in 2011.

“To ensure the continuation of this success, we will manage the textile business directly out of its most important market and at the same time strengthen R&D capabilities, especially in Germany”, said Group CEO Buscher.

Nearly 45 % of Oerlikon Textile employees are based in Asia today, with that share rising to 50 % by the end of 2014. By the end of 2012 more than 40 % of Oerlikon Textile senior management positions will be based in Shanghai (up from 10 % at present). With this simplification of the organization, and a strong order book reaching into 2014, Oerlikon Textile is positioned to benefit from long-term trends in the textile industry.

Profile of Clement Woon

Clement Woon (52, Singaporean) is an internationally experienced Executive. He has held leadership positions at, inter alia, Thomson Consumer Electronics and the Leica Group. In his previous position, Clement Woon served from 2008 to 2011 as President and CEO of SATS Ltd., Singapore, an airline catering and ground handling service provider with sales of CHF 1.2 billion, listed on the Singapore Stock Exchange. In this function he led the expansion of the company into the non-aviation sector, diversifying the portfolio and paving the way for sustainable development. As the President of Geosystems Division of Leica Geosystems AG, a multinational corporation based in Switzerland, Clement Woon led the transformation of the company’s value chain to deliver cost effective high technology solutions for the Surveying industry. He was instrumental in growing Leica Geosystems’ business and presence in the Asia-Pacific, Europe, Americas and Middle East regions. Clement Woon holds a Bachelor of Electrical & Electronics Engineering degree and a Masters of Science degree in Industrial Engineering from the National University of Singapore. He also holds a Masters of Business Administration degree from the Nanyang Technological University (Singapore).

Barmag and Hitech Automation enter into partnership for an auto-doff system for texturing machines

Barmag (Suzhou) Technology Co., Ltd. and Hitech Automation Solutions PVT LTD. of Surat, India, have agreed to an exclusive partnership to jointly market Hitech’s Doffmatic automation solution for Barmag’s proven manual eFK texturing machines. In many texturing facilities, manual doffing processes remain heavily operator-dependent – resulting in issues such as increased scrap, inconsistent quality, and limited productivity.

Oerlikon Manmade Fibers Solutions hosted successful Technology Day 2025 in India

Oerlikon Manmade Fibers Solutions recently hosted its highly anticipated Innovation and Technology Day at the Deltin Hotel in Daman by end of January 2025. The event attracted over 300 participants, including industry experts, partners, and stakeholders, who gathered to explore the latest advancements and trends in the manmade fibers industry in India.

Uster’s new Recycling Opening Index guides spinners to the perfect blend

Uster AFIS 6 now offers the key data for better decisions when blending recycled fibers. Process control is decisive in determining the quality and economic outcome. The new R Recycling Module of AFIS 6 introduces the Recycling Opening Index (ROI), so spinners can optimize their circularity credentials. It was officially launched at ITM 2026 in Istanbul, Türkiye.

Nico Pedretti appointed as Managing Director Graf Group

As of June 1, 2026, Nico Pedretti has assumed the role of Managing Director Graf Group. With more than 20 years of international industrial experience and extensive expertise in Operations, Supply Chain Management, Finance and Controlling, he brings a broad range of leadership and business experience to support Graf’s continued success.

Trützschler’s Integrated Draw Frame IDF 3: Unlocking the full potential of short fiber processing

Spinning mills worldwide are looking for solutions that combine higher productivity, stable quality and shorter processes, especially when processing short fibers. Trützschler’s integrated draw frame IDF 3 has proven to be a powerful answer to these requirements. Evaluations from several customer trials in Türkiye under real production conditions highlight the strong performance of the IDF 3, particularly when combined with the next-generation card TC 30i.

Keeping products moving with Swedish automation at FILTECH 2026

At FILTECH 2026, taking place in Cologne from June 30th to July 2nd, members of TMAS – the Swedish textile machinery association – will highlight how the country’s engineering expertise is enabling filtration manufacturers to increase productivity, improve traceability and reduce dependence on labour-intensive manual processes.

Global Mmeeting of textile technologies, ITM 2026, attracts great interest

ITM 2026, one of the world's most prestigious organizations in the field of textile technologies, opened its doors with the participation of over 1,000 companies and company representatives from 59 countries, as well as thousands of professional visitors from nearly 100 country. Attracting thousands of international visitors on its first day, ITM 2026 once again demonstrated its status as a global meeting point for the textile industry with its advanced technologies on display, newly established business connections, and record-breaking international participation.

Countdown to Textiles Recycling Expo 2026: Brussels prepares for Europe’s textile recycling gathering

With only two weeks remaining until the start of the second edition of the Textiles Recycling Expo 2026, preparations are entering the final phase. The exhibition and conference, dedicated exclusively to textile recycling and circularity, will take place on 24–25 June 2026 at Brussels Expo and is expected to attract stakeholders from across the textile recycling value chain.

Indorama Ventures enables brands to scale circular textiles through proven, traceable supply chains

Indorama Ventures, a global leader in recycled polyester staple fibers and filament yarns, will exhibit at Textiles Recycling Expo in Brussels on June 24–25. At the event, the company will show how brands and textile manufacturers can build traceable, circular textile supply chains by working with proven partners who deliver recycled materials on an industrial scale.