[pageLogInLogOut]

#Associations

VDMA members to participate in CAITME expo­

CAITME, taking place from 11 to 14 September in Tashkent, Uzbekistan, will see a strong participation of VDMA member companies. About 25 VDMA members will take part in the event. Among the numerous VDMA companies present at the trade fair with their own booth or through agents, 13 companies will be exhibiting in the area of the official German Pavilion, organised by the German Federal Ministry for Economic Affairs and Climate Action and initiated by VDMA: Brückner Textile Technologies, Erbatech, Georg Sahm, Groz-Beckert, Heusch, KARL MAYER STOLL Textilmaschinenfabrik, KURIS Spezialmaschinen, Lindauer DORNIER, Oerlikon Textile, Stäubli Bayreuth, STC Spinnzwirn, THIES, Xetma Vollenweider.
VDMA booth at Techtextil © 2024 TexData International
VDMA booth at Techtextil © 2024 TexData International


At CAITME, VDMA member companies will showcase the most advanced technology for the textile sector. The exhibiting companies are at the forefront, especially in sustainability and digitisation of production processes.

With exports of textile machinery and accessories worth 85 million euros in 2023, Germany was once again the second biggest supplier to the Uzbek textile sector, surpassed only by China. Uzbekistan is one of the largest producers and exporters of cotton. In the cotton sector, Uzbekistan already has a fully integrated production chain. Almost the entire cotton fibre is spun in the country. The Uzbek government has pushed ahead with extensive economic reforms in recent years. The textile industry is one of the top investment sectors in the manufacturing industry. Besides cotton spinning, the textile sector is enlarging its capacities in the downstream production steps of the textile chain, such as fabric making, finishing and dyeing.

Dr. Harald Weber, Managing Director of the VDMA Textile Machinery Association, stated: “To compete globally in the textile industry, companies must prioritise technology updates. CAITME is a perfect platform to intensify the collaboration between our industry and the Uzbek textile sector and to set up new contacts.”

The German Pavilion will be located in Pavilion 4 of the Uzexpocentre in Tashkent. For more information, please check: https://caitme.german-pavilion.com/



More News from VDMA Fachverband Textilmaschinen

#Techtextil 2026

Young talents honoured – 60 years Walter Reiners Foundation

At the Techtextil trade fair in Frankfurt at the end of April, Peter D. Dornier, chairman of the VDMA’s Walter Reiners Foundation, presented awards to five successful young engineers. Promotion and sustainability awards were presented in the categories of bachelor’s/project theses and diploma/master’s theses. Academic theses are eligible for the sustainability awards if, for example, they develop solutions for resource-efficient products and technologies.

#Associations

Young researchers recognised for cutting-edge work in recycling, fibre technology and textile mechanics

At the Aachen-Dresden-Denkendorf International Textile Conference held in Aachen at the end of November, Peter D. Dornier, Chairman of the Walter Reiners Foundation of the VDMA, honoured five successful young engineers. Promotion and sustainability prizes were awarded in the categories bachelor/project theses and diploma/master theses. Academic theses that develop solutions for resource-saving products and technologies, for example, are eligible for the sustainability awards.

#ITMA Asia + CITME Singapore 2025

VDMA members at ITMA ASIA + CITME in Singapore

With 69 exhibiting member companies, ITMA ASIA + CITME 2025 is once again marked by a strong presence of VDMA companies. Altogether 82 companies from Germany will exhibit at the show, covering about 3,500 square meters of exhibition space, topped only by China and Italy. VDMA initiated a German Pavilion with two group stands (spinning in hall 4 and finishing in hall 7) with a total of 30 exhibitors.

#ITMA Asia + CITME Singapore 2025

VDMA member companies on display at ITMA ASIA

ITMA ASIA + CITME end of October in Singapore will see a strong participation of around 70 VDMA member companies. They will cover nearly all different machinery chapters along the textile value chain including spinning and man-made fibres, nonwovens, weaving, braiding, knitting & warp knitting, finishing & dyeing as well as technologies for textile recycling and processing of recycled material. VDMA initiated a German Pavilion with two group stands (spinning in hall 4 and finishing in hall 7) with a total of 30 exhibitors.

More News on Associations

#Associations

Business situation weakens slightly, but the industry stays cautiously optimistic

The International Textile Manufacturers Federation (ITMF) has published the results of its 39th Global Textile Industry Survey (GTIS), conducted from 14 to 22 July 2026 among companies along the entire global textile value chain. Worldwide, 10% of participants rated their business situation as good, 53% as satisfactory and 37% as bad — a balance of -26pp, down from -17pp in May but still well above the 2023 lows. All regions are now in negative territory, from South Asia at -3pp to North & Central America at -58pp.

#Associations

IVGT membership: expertise that pays off

For energy-intensive textile companies, government compensation mechanisms are an important economic factor. The IVGT successfully supports its member companies in applying for state aid and thereby regularly contributes to significant financial relief.

#Associations

Italian textile machinery orders show quarterly recovery in Q2 2026

In the period between April and June 2026, order intake for Italian textile machinery manufacturers showed mixed but encouraging signals for the second half of the year. The order index at constant prices stood at 46.6 points (taking 2021=100 as the base year), showing a slight decrease of 3% compared to the same quarter of 2025. This trend was largely due to the contraction recorded in the domestic market, which fell by 25% compared to the corresponding period of the previous year.

#Associations

Consolidation amidst difficult market conditions

The International Textile Manufacturer Federation has published its International Textile Industry Statistics (ITIS) on productive capacity and raw materials consumption in the short-staple organized (spinning mill-) sector in virtually all textile-producing countries in the world.

Latest News

#Knitting & Hosiery

SHIMA SEIKI brings new flat knitting technologies to FEBRATEX 2026

Leading flat knitting solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA., will exhibit at the Brazilian Textile Industry Fair (FEBRATEX 2026) this month. On display will be a roundup of SHIMA SEIKI computerized flat knitting technology, represented by WHOLEGARMENT® knitting machines, computerized flat knitting machines featuring a brand-new model with high productivity and excellent cost performance, a glove knitting machine and the latest digital solutions.

#Man-Made Fibers

Lenzing reports improved half-year results and advances strategic transformation

Despite a persistently challenging market environment in the first half of 2026, characterized by volatile energy and raw material prices, subdued global consumer demand and intensified competition from Asia, the Lenzing Group significantly improved its financial performance. Net result after tax more than doubled to EUR 35.6 million, compared with EUR 15.2 million in the first half of 2025. Free cash flow increased to EUR 45.8 million, while EBITDA amounted to EUR 239.2 million. Revenue totaled EUR 1.27 billion, compared with EUR 1.34 billion in the previous year.

#Recycling / Circular Economy

German 'ZOLL' turns end-of-life uniforms into valuable raw materials

Together with CWS Workwear, the German Customs Administration is extending the life cycle of service uniforms through reuse, recycling and material recovery, demonstrating how circular economy principles can be successfully implemented in the public sector while delivering significant savings.

#Spinning

Trützschler’s latest spinning and card clothing innovations at CAITME 2026

From September 8 to 10, 2026, Trützschler will present its latest innovations in spinning and card clothing for state-of-the-art fiber processing at CAITME in Tashkent, Uzbekistan. Visitors are invited to meet the experts at Pavilion 2, Booth D50 and explore solutions designed to increase productivity, streamline processes, and ensure consistently high yarn quality. Key topics include the next-generation card TC 30i, the integrated draw frame IDF 3, the high-performance comber TCO 21XL as well as Trützschler Card Clothing’s new flat top series STEELTOP®.

TOP