[pageLogInLogOut]

#Associations

Italian Textile Machinery: In Q2 2025 signs of recovery in the domestic market

In the second quarter of 2025, the index of orders for textile machinery, compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, showed a slight decrease compared to the same period in 2024 (-1%). In absolute terms, the index stood at 47.1 points (base year 2021=100).

This result was driven by an increase in order intake from the domestic market, which almost entirely offset the decline recorded in foreign markets.

Orders collected on the domestic market rose by 38% compared to the second quarter of 2024, reaching an absolute value of 70.9 points.

In foreign markets, orders were down 7% compared to the same period of the previous year. The absolute value of the index stood at 43.8 points.

In the second quarter, the order backlog reached 3.9 months of guaranteed production (up from 3.6 months in the first quarter). It is also worth noting that, on average, companies in the sector used only 55% of their production capacity in the first half of the year. Utilization is expected to reach 60% in the second half of 2025.

Marco Salvadè, President of ACIMIT, commented: “The signals coming from the domestic market are encouraging, but concerns about the future remain. Demand in Italy is still weak. The increase recorded between April and June will need to be confirmed over the course of the year.”

“On the foreign front,” added Marco Salvadè, “a general climate of uncertainty persists, due not only to U.S. tariffs imposed on the EU, but also to the broader geopolitical situation. The 15% duty, combined with a significant depreciation of the dollar against the euro, may have varying negative impacts on our exports to the U.S., depending on the tariff rates applied to other Countries supplying technology to U.S. textile companies. For now, the U.S. remains a key market for our manufacturers: it was the fourth largest in 2024, with a value of over 112 million euros, and it continued to grow in the first four months of 2025 (+3%). Also concerning is the weak demand for textile machinery in the two most important markets, China and Turkey. Italian sales from January to April 2025 fell by 32% in the Chinese market and by 47% in the Turkish one.”




More News from Associazione Costruttori Italiani di Macchinario per l Industria Tessile (ACIMIT)

#Associations

Italian textile machinery: Orders index declines in 2025 third quarter

In the third quarter of 2025, the orders index for textile machinery – compiled by ACIMIT’s Economics Department (the Association of Italian Textile Machinery Manufacturers) – recorded a 16% decrease compared to the same period in 2024. In absolute terms, the index stood at 41.8 points (base year 2021 = 100).

#ITMA Asia + CITME Singapore 2025

The Italian Textile Machinery industry on display at ITMA ASIA + CITME Singapore 2025

100 Italian companies will exhibit at ITMA ASIA + CITME Singapore 2025, taking place from October 28 to 31. With an area of around 4,000 square meters, Italy ranks among the top exhibiting Countries, as in previous editions. 53 Italian exhibitors will show their innovations within the National Sector Groups, organized by ACIMIT (Association of Italian Textile Machinery Manufacturers) and Italian Trade Agency.

#Associations

Italian Textile Machinery: 2024 marked by challenges and a light slowdown - Focus now on the strength of Made In Italy

Enhancing the value of Made in Italy must be placed at the heart of the challenges facing the Italian textile machinery industry in the coming years. This was the message emphasized by Marco Salvadè, President of ACIMIT, the Association of Italian Textile Machinery Manufacturers, during the General Assembly, held on Friday, 4 July, at the Ferrari Museum in Maranello. Presenting the latest industry figures, Salvadè reported that in 2024 production fell by 8% compared to 2023, amounting to €2.1 billion, while exports declined by 9% (€1.8 billion).

#Associations

Textile Machinery at Milano Unica

At the next edition of Milano Unica, the leading international trade fair for high-end fabrics and accessories, scheduled to take place at Rho Fiera Milano from July 8 to 10, ACIMIT (the Association of Italian Textile Machinery Manufacturers) will participate for the first time with an institutional booth.

More News on Associations

#Associations

Waste2Fashion: FTTH Committed to advancing Circular Fashion in the Mediterranean

As an official partner of the Waste2Fashion project, the Tunisian Federation of Textile and Apparel (FTTH) participated in the Kick-off Meeting held on 10–11 December in Spain. The event brought together project partners from across the Mediterranean, including Spain, Italy, Egypt, Lebanon, and Tunisia, to align on a shared vision and initiate the first implementation steps.

#Associations

AATCC announces 2025 Herman & Myrtle Goldstein Graduate Student Paper Competition winners

The American Association of Textile Chemists and Colorists (AATCC) recognized the winners of the 2025 Herman & Myrtle Goldstein Graduate Student Paper Competition. Founded in 1982 to give student members the chance to conduct and present original research, the competition was renamed in 1994 in honor of Herman and Myrtle Goldstein, following their US$60,000 endowment. Their gift is a lasting remembrance of their dedication to young people in the textile industry.

#Associations

SIMTA joins ITMF as Corporate Member

In the past two decades SIMTA has established itself as producer of specialized machinery for the textile industry. In short period of time, SIMTA became an important supplier of precise rollers for top OEMs. Afterwards SIMTA started manufacturing overhead cleaners, bobbin transport systems, and other textile ancillaries. In the meantime, SIMTA is a leader in this space in collaboration with the German automation technology partner Jacobi.

#Associations

Driving innovation in technical textiles, digitalisation and testing

Members of the British Textile Machinery Association (BTMA) can look back on 2025 as a year marked by notable technological advances and continued progress in global trade, despite an uncertain and volatile market.

Latest News

#Research & Development

Innovation center for textile circular economy inaugurated

Just over eight months after the foundation stone was laid, the new Innovation Center for Textile Circular Economy was officially inaugurated today at TITK Rudolstadt. Thuringia's Minister President Mario Voigt, TITK Director Benjamin Redlingshöfer, and other guests of honor cut the ribbon to the modern building complex and viewed the premises, which are now ready for occupancy. The “DICE – Demonstration and Innovation Center for Textile Circular Economy” is TITK's largest single investment to date. The Free State of Thuringia supported the total cost of €11.5 million with €8 million in GRW and FTI funding.

#Research & Development

Sustainable design of Geosynthetics and roof underlayments made from recyclates

Is it possible to recover plastic recyclates from previously unused waste streams in order to produce high-quality fibers and films? How can bio-based polymer fibers be manufactured so as to allow adjustable biodegradability? These are the questions being addressed by researchers from the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE in the Zirk-Tex project.

#Nonwoven machines

Yanpai expands nonwovens capacity with two new ANDRITZ needlepunch lines

Zhejiang Yanpai Filter Technology Co., Ltd. (hereinafter referred to as “Yanpai”) has placed an order with international technology group ANDRITZ for two high-performance needlepunch lines. The equipment will be installed at Yanpai’s headquarters facility in Tiantai County, China. Commissioning is scheduled for the third quarter of 2026.

#Natural Fibers

Dr. Jane Dever inducted into the 2025 Cotton Research and Promotion Hall of Fame

Dr. Jane K. Dever, a recognized leader in cotton breeding and fiber quality research, was inducted into the 2025 Cotton Research and Promotion Hall of Fame during the joint Cotton Incorporated/Cotton Board Annual Meeting held on December 9 in New Orleans, LA.

TOP