[pageLogInLogOut]

#ITMA Asia + CITME 2024

VDMA members at ITMA ASIA in Shanghai

With 49 exhibiting member companies, ITMA ASIA + CITME, taking place October 14 – 19 in Shanghai, will see again a strong VDMA participation. German exhibitors make up the largest foreign presence at the trade fair.
Dr. Harald Weber speaking at the VDMA press conference at ITMA 2023 © 2024 TexData International
Dr. Harald Weber speaking at the VDMA press conference at ITMA 2023 © 2024 TexData International


The exhibiting VDMA members cover nearly all different machinery chapters with a focus on spinning and manmade fibers, nonwovens, weaving, braiding, knitting & hosiery, finishing & dyeing and textile processing. The heading of this year’s VDMA activities in Shanghai will be "smart technologies for green textile production". The VDMA members are committed to reducing the consumption of resources in the textile value chain with highly efficient technologies. The goal is to utilise potential for resources, such as textile material, water, energy and chemicals, to minimise CO2 emissions. So, for VDMA members the show is an opportunity to reassert that they remain at the forefront of new ideas, products and technologies in the textile machinery sector. 

With a view to the expectations for this year’s ITMA ASIA, Dr. Harald Weber, Managing Director of the VDMA Textile Machinery Association said: “ITMA ASIA 2023 was the first edition of the show after the Covid pandemic. After years of lockdowns and travel restrictions, people could meet again, which made the event something special. In the meantime, the economic situation has deteriorated noticeably. But there is some light at the end of the tunnel. This makes the participation of VDMA member companies at ITMA ASIA 2024 even more important. The presence at the event is essential to ensure an exchange of information between machinery manufacturers and textile producers in Asia and to get ready for the sector’s restart.”

Throughout the last years, around 50% of the German exports of textile machinery and accessories went to Asia. Between January and July 2024, textile machinery worth about 580 million euros have been shipped from Germany to Asia, a decrease of 25% compared to 2023 due to the weak global economic situation. With 240 million euros, the biggest export market was again China, followed by India, Bangladesh, Uzbekistan, Pakistan and Vietnam.

The VDMA team in Shanghai is staffed again with colleagues from the VDMA headquarters in Germany as well as from VDMA China. With these joined forces, the team is well prepared to support the exhibiting member companies on site.



More News from VDMA Fachverband Textilmaschinen

#Associations

Young researchers recognised for cutting-edge work in recycling, fibre technology and textile mechanics

At the Aachen-Dresden-Denkendorf International Textile Conference held in Aachen at the end of November, Peter D. Dornier, Chairman of the Walter Reiners Foundation of the VDMA, honoured five successful young engineers. Promotion and sustainability prizes were awarded in the categories bachelor/project theses and diploma/master theses. Academic theses that develop solutions for resource-saving products and technologies, for example, are eligible for the sustainability awards.

#ITMA Asia + CITME Singapore 2025

VDMA members at ITMA ASIA + CITME in Singapore

With 69 exhibiting member companies, ITMA ASIA + CITME 2025 is once again marked by a strong presence of VDMA companies. Altogether 82 companies from Germany will exhibit at the show, covering about 3,500 square meters of exhibition space, topped only by China and Italy. VDMA initiated a German Pavilion with two group stands (spinning in hall 4 and finishing in hall 7) with a total of 30 exhibitors.

#ITMA Asia + CITME Singapore 2025

VDMA member companies on display at ITMA ASIA

ITMA ASIA + CITME end of October in Singapore will see a strong participation of around 70 VDMA member companies. They will cover nearly all different machinery chapters along the textile value chain including spinning and man-made fibres, nonwovens, weaving, braiding, knitting & warp knitting, finishing & dyeing as well as technologies for textile recycling and processing of recycled material. VDMA initiated a German Pavilion with two group stands (spinning in hall 4 and finishing in hall 7) with a total of 30 exhibitors.

#ITMA Asia + CITME 2024

Smart technologies for green textile production

With 42 exhibiting member companies, ITMA ASIA + CITME 2024 is once again marked by a strong presence of VDMA companies. They cover nearly all different machinery chapters with a focus on spinning and man-made fibers, nonwovens, weaving, braiding, knitting & warp knitting, finishing & dyeing as well as technologies for textile recycling and processing of recycled material. In total, the German participation at the fair is the largest from outside China.

More News on ITMA Asia + CITME 2024

#Weaving

Innovations for warp preparation at the cutting edge

At ITMA ASIA + CITME in October, KARL MAYER presented solutions for lower production costs and environmental impact and greater efficiency in the warp preparation sector. After the trade fair, the company can draw a positive conclusion, both in terms of the number of visitors and the quality of the discussions.

#ITMA Asia + CITME 2024

KARL MAYER Technische Textilien at ITMA ASIA + CITME - a presentation that opens up many opportunities

During ITMA ASIA + CITME 2024, KARL MAYER presented “Master the Change” solutions for numerous areas of the textile industry, including the technical textiles segment. At its stand in the Shanghai National Exhibition and Convention Center, the global player showed how the non-crimp fabrics from its highly productive composite machines can be used to exploit promising sales potential with lightweight construction applications.

#ITMA Asia + CITME 2024

Successful warp knitting machines and textile show to master the changes of our time

Warp knitting companies in Asia are also facing fundamental changes and challenges considering the tense global economic and geopolitical situation. During ITMA ASIA + CITME in October 2024, KARL MAYER showed how these can be mastered: with innovations that are primarily aimed at greater profitability, flexibility and sustainability.

#ITMA Asia + CITME 2024

Successful at ITMA Asia 2024 - Saurer's technology highlights

At ITMA Asia 2024, Saurer's new products were very popular and in the focus of visitor interest. Investment in new equipment seems to be on the rise and Saurer was positively surprised by the number and quality of visitors as well as the deals closed during the exhibition. Overall, visitors showed great interest in all the Saurer innovations designed to contribute to the future of textile technology and yarn production.

Latest News

#Digital Printing

Epson launches SureColor G9000: high-production Direct-To-Film printer delivering greater productivity and reliability

Epson today announces the launch of the SureColor G9000, a new high-production Direct-To-Film (DTFilm) printer designed to meet growing global demand for flexible and efficient textile transfer printing. Expanding Epson’s DTFilm line-up alongside the SC-G6000, the SC-G9000 introduces enhanced speed, reliability and ease of maintenance for commercial garment decorators and textile producers.

#Nonwoven machines

Three ANDRITZ spunlace lines start operating at Alar Silk Road New Materials in China

Alar Silk Road New Materials and ANDRITZ have successfully commissioned three spunlace lines in crosslapped configuration at Alar’s facility in Aral City, Xinjiang, China.

#Raw Materials

Better Cotton Initiative opens enrollment in the US with promising opportunities for producers

Producer enrollment for the US Program of the Better Cotton Initiative (BCI) is open until May 15 for the 2026-2027 season. With over 2,600 members spanning the cotton supply chain and more than 11,000 users of its Better Cotton Platform (BCP) as of 2025, BCI’s standard is implemented in 15 countries and covers one fifth of global cotton production.

#Knitting & Hosiery

SHIMA SEIKI to exhibit at GMMSA Expo India

Leading Japanese computerized flat knitting technologist SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Indian sales representative Universal MEP Projects & Engineering Services, Ltd., will participate in the upcoming Garments Machinery Manufacturers & Suppliers Association (GMMSA) Expo India 2026 exhibition to be held in Ludhiana, India next month. Through its lineup at GMMSA, SHIMA SEIKI aims to further strengthen its presence within the Indian market with an exhibit that caters to diverse needs, consisting of seam-free WHOLEGARMENT® knitting technology as well as a brand-new shaping machine with high productivity and excellent cost performance.

TOP