[pageLogInLogOut]

#Research & Development

The problems and challenges of cup sizes

Over 35 million women and girls in Germany wear a bra every day. This huge market volume alone shows why it is especially important for the manufacturers of foundation garments and cup-based clothing to design products that fit reliably. However, national and international studies suggest that over 50% of women wear a badly fitting bra and that many women have major problems finding the right bra size for them.
Why is this so? The reason lies mainly in the existing system of bra sizes which does not allow the cup size to be determined by breast volume. In Germany, bra size is indicated by a number and a letter, e.g. 75 B. The number indicates the circumference below the bust in centimetres, and the letter indicates the cup size. The cup size is based on the difference between the circumference around the breasts and that below the breasts. That is what customers use when buying bras in the shops and that is also what determines other parameters in designing patterns for products that incorporate a cup such as foundation garments, swimwear and body hugging clothing. However, simply measuring the difference between the circumference around and below the breasts gives no indication of the actual shape or volume of the breast. One of the results of this is that cup shapes and sizes from different manufacturers vary considerably. It also leads to great uncertainty among customers when they try to find the correct size.
Pic: In terms of measurements, all three women have the same cup size, but the volume varies. How much volume should be assigned to each cup size? © Hohenstein Gruppe Innovative approach to optimised cup sizing Making underwear that fits properly for women of all sizes, body types and age groups is not possible using the current cup system. Women's body shapes vary too much, especially when it comes to their breasts. That is why the Hohenstein Institute set up a research project with the aim of developing a new system that would allow cup sizes to be determined in accordance with body shape and breast volume. The key questions to be addressed by the research project were "Which body parameters affect cup size?", "What kind of anthropometric process is required to determine cup volume reliably and accurately?" and "How can cup sizes be assigned accurately, taking account of the actual volume of the breast?". The latest 3D technologies were used in the research work.
Pic: Volume-based pattern development based on 3D scans - the new data on breast volume was converted into optimised basic patterns for use in pattern-cutting. © Hohenstein Gruppe

The results of the research are in the form of data about breast volume and new breast measurements which can be used to supplement and update existing size charts for foundation garments. Those body parameters have been described which affect the volume of the breasts, and solutions proposed for how the process of determining cup size could be improved. The researchers also developed virtual 3D cup models for visualising cup sizes and used them to construct volume-based 3D basic patterns. The results also show the extent to which successful marketing of foundation garments depends on both the product and the target market. There can never be one standard solution that is suitable for all circumstances.
Pic: Cup size models in size 75, Cup A to B - Based on statistical analysis of breast measurements, and 3D shape analysis, researchers developed average 3D models to visualise average breast volume. © Hohenstein Gruppe The new findings from the project describe the specific sizing requirements for foundation garments and cup-based clothing products, and constitute an important basis for further development. They will help to improve the fit of products, assist customers in finding the right size and reduce high product development costs. The virtual breast models that have been developed also provide useful fitting principles for use in 3D simulation and design systems.
Pic: Cup size is based on the difference between the circumference around and below the breasts. © Hohenstein Gruppe Who will benefit from this innovative method of cup sizing? A research report is available that can be obtained by any interested company. It describes the results and the basic principles which were derived from the research and need to be taken into account when developing and marketing foundation garments and cup-based clothing products. However, it is not only the manufacturers of underwear, orthopaedic items and ladies' outerwear who will benefit. It will also be to the advantage of customers themselves if the results of the research can be used to develop and market bra shapes that are more adapted to customers' body shapes. It will be easier for them to find the right size in the shops and, secondly, it will help ensure that more women wear a correctly fitting bra. The researchers hope that, in the long term, typical health problems such as skin irritation, shoulder and back problems and shoulder strain caused by badly fitting bras can be avoided.

More News from Hohenstein Institute

#Research & Development

New DIN SPEC assesses environmental impact of textile fragments in soil

Textile products made from synthetic fibres, finished fabrics or dyed materials release fibre fragments into the environment at every stage of their life cycle. With the new DIN SPEC 19296, Hohenstein has developed a standardised testing method to analyse how these fragments behave in soil under natural conditions. Until now, little was known about their environmental behaviour or potential ecological effects once released.

#Research & Development

Testing and research laboratory ensures safe and more sustainable products worldwide

For 80 years, Hohenstein has stood for independent testing, scientific expertise and practical solutions. Today, the testing and research service provider supports manufacturers and brands worldwide in making textiles, hardlines and medical devices safe, more sustainable and market-ready – thereby building trust among consumers. With an international presence and interdisciplinary expertise, Hohenstein supports its customers from production through to market launch, helping them navigate an environment of growing regulatory and societal demands.

#Research & Development

A smarter way to verified Chemical Compliance

Hohenstein and GoBlu Drive Innovation in Sustainable Supply Chain Management As regulatory demands, customer expectations, and sustainability goals continue to grow, the ability to manage chemical compliance and data across complex supply chains has become critical. Hohenstein and The BHive® by GoBlu are initiating a strategic partnership to enhance chemical management in the textile sector. The collaboration delivers more than just a service – it provides an integrated, future-ready solution for brands, manufacturers and suppliers seeking trusted chemical management and credible sustainability.

#Research & Development

Hohenstein achieves GLP Certification for Medical Device Testing

Since the middle of July, the testing service provider Hohenstein has been certified to conduct medical device testing in accordance with the internationally recognised Good Laboratory Practice (GLP) standard. This certification comprehensively covers chemical, physical and biological safety testing of medical devices.

More News on Research & Development

#Research & Development

Textile cascade filter for removing microplastics from wastewater

Microplastics are now found almost everywhere, even in remote regions of Antarctica. They enter the human body through the food chain. Studies indicate that microplastics may have negative effects on the human health.

#Research & Development

Fraunhofer IAP paves the way for "Green" carbon fibers

A new pilot plant in Guben is set to enable the production of bio-based carbon fibers. The plant is part of the Carbon Lab Factory Lausitz and will make an important contribution to the transformation of the Lausitz region—from a traditionally raw material- and basic industry-oriented region to a hub for innovative high-performance materials. The German federal government and the state of Brandenburg are providing the Fraunhofer Institute for Applied Polymer Research IAP with 53.3 million euros for this purpose.

#Research & Development

Hof University develops sustainable textile coating for the fashion of tomorrow from mushrooms

Clothing is often treated as disposable: T-shirts for events, general merchandise, or short-term campaigns frequently end up in the trash after only a few uses. This is particularly problematic given that their production still largely relies on fossil-based materials. This is precisely where a new research project at Hof University of Applied Sciences comes in.

#Research & Development

Textilfabrik 7.0 launched: Mönchengladbach becomes a real-world lab for sustainable textile production

With the official kick-off event of the Textilfabrik 7.0 (T7), a major transformation project for the German textile and apparel industry has been launched in the Monforts Quarter in Mönchengladbach. At the “Textile Roundtable,” an event format organized by the Zukunftsagentur Rheinisches Revier, representatives from industry, research, politics, and the regional economy came together to jointly lay the foundation for CO₂-neutral, circular, and economically viable textile production in Germany.

Latest News

#Techtextil 2026

Modernizing Needling – DiloGroup at Techtextil & INDEX 2026

With the theme “Modernizing Needling”, the DiloGroup presents a comprehensively enhanced portfolio for needling technology. The objective is to further increase the performance and application range of needlefelt production lines in terms of productivity, flexibility, and the development of new products, thereby meeting the growing demands of modern technical textiles.

#Advertorial

New Gravimax MMX-R X-ray sensor platform opens up new application fields

The demands placed on quality control in web-based production processes are increasing: materials are becoming more complex, basis weights are varying more widely, and at the same time, pressure is growing to make processes more efficient and transparent. Precise measurement data across the entire web width has therefore become a key factor in ensuring stable production processes. With its new Gravimax MMX-R sensor platform, Mahlo introduces a radiometric measurement solution designed to set new standards in determining basis weight and material composition. The platform combines advanced X-ray technology with newly developed signal processing, enabling measurement tasks that previously often required multiple sensor technologies.

#Recycling / Circular Economy

Carbios confirms Longlaville plant in France following financing progress

Carbios has reaffirmed its plans to build its Longlaville plant in France within a project financing framework, targeting the start of production in the first half of 2028. The company also reports a solid cash position of around €60 million at the end of 2025 and has appointed Benoît Grenot as Deputy Chief Executive Officer to support the execution of its strategic projects.

#Composites

KARL MAYER strengthens partnerships in the composites industry at JEC World 2026

KARL MAYER further strengthened its role as a reliable and competent partner to the composites industry at JEC World 2026. The global market leader in textile machinery manufacturing used the trade show to meet key customers, establish numerous new contacts, and engage in in-depth technical discussions.

TOP