[pageLogInLogOut]

#Composites

Kordsa technologies reinforce car of YTU Racing team

Exporting technology to the world from Turkey, Kordsa supports university projects as a reflection of its mission to reinforce the future. Yıldız Technical University Racing team, powered by Kordsa’s composite technologies, participated with its fifth vehicle in Formula Student, the largest engineering competition held in Autodromo Riccardo Paletti in Varano, Italy. YTU Racing team’s project that Kordsa provided with composite material support, succeeded to be in top 20 among 60 teams.

The YTÜ Racing team of Yildiz Technical University, one of the university projects sponsored by Kordsa in an effort to encourage students to engage in technology, innovation, R&D and engineering, has achieved great success in Formula Student Italy. Four teams from Turkey took part in Formula Student. YTU Racing Team passed all technical control stages, qualified to participate in the dynamic race stages. YTU Racing team finished in twentieth place out of 60 teams in Formula Student which aims to develop enterprising, innovative and well-equipped young engineers working with team spirit.

Always promoting university-industry collaboration, Kordsa, supported YTU Racing team in this project with composite materials. The composite materials supplied by Kordsa are used especially at the hull, wings and seats of the vehicle to make these parts stronger, more durable and more convenient for speed due to its lightweight. Kordsa will continue to reinforce the future by supporting YTU Racing team which aims to take part in Formula Student East race.

(c) 2018 Kordsa
(c) 2018 Kordsa


More News from Kordsa Composite Technologies

#Composites

Kordsa showcases its global expertise in material technologies at JEC World 2026

Kordsa, a subsidiary of Sabancı Holding, shared its global expertise in material technologies with participants at JEC World 2026, held in Paris. The company’s solutions developed for a wide range of industries—particularly aviation, energy, and automotive—stood out among its key innovations at the exhibition. Throughout the event, Kordsa also presented its vision for sustainable growth and its strategic transformation in composite technologies to international stakeholders.

#Nonwovens / Technical Textiles

Kordsa showcases sustainability and innovation-driven solutions at Tire Technology Expo 2025

Kordsa, a global player in advanced material technologies, participated in Tire Technology Expo 2025, one of the leading trade fairs for the tire industry, held in Hannover, Germany. At the event, Kordsa highlighted its advancements in tire reinforcement technologies while sharing its vision of providing solutions to the global tire industry with the advantage of local production.

#Composites

Kordsa recognized on CDP 2024 ‘Global A List’ for climate change and water

Kordsa, a subsidiary of Sabanc? Holding, has been recognized on the 2024 Global A List of the Carbon Disclosure Project (CDP), one of the world’s most prestigious environmental reporting platforms, for both Climate Change and Water themes. This marks the first time Kordsa has achieved an A rating in both categories.

#Sustainability

Kordsa strengthens its commitment to sustainability with another Gold Medal from EcoVadis

Kordsa, one of the world’s leading material technologies companies, has once again been awarded a Gold Medal by the global sustainability rating platform EcoVadis for its successful performance in sustainability.

More News on Composites

#Research & Development

Novel flame-retardant and recyclable fiber-reinforced composite

Airplanes and passenger trains must meet strict safety requirements, including fire safety standards. This calls for materials that are flame-retardant, lightweight, robust, and scalable. Empa researchers, in collaboration with their industry partner Elantas, have now succeeded for the first time in making such a material – a composite – fully recyclable.

#Composites

WHILL selects Teijin’s tough, lightweight Carbon Fiber Composite for new last-mile mobility

Teijin Limited announced today that WHILL Inc., a global leader in inclusive mobility technology, has selected Sereebo® P CFP series, a carbon fiber-reinforced thermoplastic (CFRTP) material, for key structural components of the upcoming WHILL Model C Lite. Sereebo® P CFP series provides high strength, light weight, design flexibility and system cost advantages to the Model C Lite, which is a battery powered, single-seat, last-mile device. This new model combines maneuverability with light weight and one-handed folding to ensure ease of handling and operation.

#Composites

Fewer pores, greater impact tolerance: Peter Dornier Foundation Prize 2026 honours material research on fibre-reinforced composite components for aerospace industry

Microscopically small pores that form during manufacture, or barely visible impact damage, can severely impair the load-bearing capacity and service life of fibre-reinforced composite components. Two young researchers have presented groundbreaking work in this field and will both be awarded the 2026 Peter Dornier Foundation Prize: Dr.-Ing. Benedikt Neitzel from the Technical University of Ilmenau for his doctoral thesis on pore minimisation in the RTM process, and Johanna Buschmann, M.Sc., for her master’s thesis, completed at the German Aerospace Centre, on the improved impact tolerance of 3D fabrics compared to 2D laminates.

#Composites

Carbon Revolution wins Composites Australia Engineering Team Excellence Award

Carbon Revolution has won the Engineering Team Excellence Award at the 2026 Composites Australia Annual Industry Awards.

Latest News

#Nonwovens

25 years in the room: EDANA’s OUTLOOK™ returns to Cascais to shape a changing industry

The market does not wait, and it does not grant easy answers. Across the absorbent hygiene, personal care, and wipes sectors, business is undergoing a period of intense, necessary adjustment. New European rules on packaging, single-use items, product safety, and end-of-life are forcing companies to drop old assumptions about materials and performance. At the same time, producers must keep their goods safe, reliable, and affordable for the babies and aging adults, who rely on them every day.

#Recycling / Circular Economy

Recover™ names Enes Adak and Fehmi Yüksel as Co-CEOs to accelerate its next growth phase

Recover™, a leading materials science company and global producer of consistent high-quality, recycled cotton fibers and circular material solutions at scale, today announced the appointment of Enes Adak and Fehmi Yüksel as Co-Chief Executive Officers. This leadership transition marks an important step in Recover’s evolution as the company enters its next stage of development.

#Research & Development

ADD-ITC 2026 highlights strong industry participation

The Aachen-Dresden-Denkendorf International Textile Conference (ADD-ITC) 2026 will place a strong focus on the exchange between textile research and industry when it takes place on November 26–27, 2026, at the International Congress Center Dresden. According to the preliminary conference program, more than two-thirds of all presentations will be contributed by companies or jointly presented by industry and research institutions.

#Recycling / Circular Economy

Arc'teryx introduces System 0™, a new framework for the future of product design and circularity

Arc'teryx Equipment, the global design company specializing in technical high-performance apparel and equipment, today introduced System 0™, a new framework that reimagines how products can be designed, manufactured, used, repaired, and ultimately regenerated. System 0 represents the next evolution for sustainability in the outdoor industry, as it embeds circular thinking across an entire product lifecycle while maintaining the uncompromising performance standards that define the Arc’teryx brand.

TOP