#Composites

2017-10-18

Kordsa at Turk Kompozit 2017

Kordsa, a global player in the reinforcement technologies which has recently transferred its 44-year tire reinforcement experience into construction reinforcement and composite technologies, participated in Turk Kompozit 2017, organized by the Turkish Composite Manufacturers Association between 5-7 October in İstanbul.

Sabancı Holding affiliate Kordsa participated in Turk Kompozit 2017 with a booth and two presentations made within the scope of the event, and shared with the participants its latest innovations and solutions in composites technologies.

Organized by the Turkish Composites Manufacturers Association for the 3rd time this year, Turk Kompozit 2017 focused on production, processing and application methods in composite industry. Almost 200 brands had the chance to share with participants their technological developments as well as their products, solutions and applications during the 3-day event at Istanbul Lütfi Kırdar International Congress and Exhibition Center, İstanbul.

Kordsa’s latest innovations and solutions attracted great interest of the attendees. The Reinforcement giant, exhibited at its booth the visual and structural composite parts produced for various sectors together with the the bicycle manufactured using Kordsa’s composite technology. Two of the many technical and commercial presentations at the event was made by Kordsa, titled "Life Protection Products" and "Quick Cure Compression Moldable Prepreg for the Production of Visually Appealing Automotive Parts".

Kordsa showcases sustainability and innovation-driven solutions at Tire Technology Expo 2025

Kordsa, a global player in advanced material technologies, participated in Tire Technology Expo 2025, one of the leading trade fairs for the tire industry, held in Hannover, Germany. At the event, Kordsa highlighted its advancements in tire reinforcement technologies while sharing its vision of providing solutions to the global tire industry with the advantage of local production.

Kordsa recognized on CDP 2024 ‘Global A List’ for climate change and water

Kordsa, a subsidiary of Sabanc? Holding, has been recognized on the 2024 Global A List of the Carbon Disclosure Project (CDP), one of the world’s most prestigious environmental reporting platforms, for both Climate Change and Water themes. This marks the first time Kordsa has achieved an A rating in both categories.

MEL Composites delivers advanced hull infusion for Técnico Solar Boat’s hydrogen-powered São Gabriel 01

MEL Composites has reinforced its partnership with Técnico Solar Boat through the successful hull infusion of the São Gabriel 01, an 8m long, 2.4m wide, hydrogen-powered hydrofoiling vessel. Designed to compete at the Monaco Energy Boat Challenge in July 2026, the São Gabriel 01 is the team’s most technically demanding project to date and showcases the future of sustainable marine engineering by combining advanced composite manufacturing with clean energy systems.

Sicomin appoints CS Kompozyty as exclusive Distributor for Poland

Sicomin is pleased to announce the appointment of CS Kompozyty as its exclusive distributor for Poland. The partnership will provide Polish composite manufacturers with comprehensive access to Sicomin's broad range of performance epoxy resins, green epoxies, hardeners, and adhesive solutions, supported by local technical expertise and rapid delivery capabilities.

JEC World 2026 reveals the list of finalists for the Innovation Awards

Each year, the JEC Composites Innovation Awards recognize collaborative, innovative, and ambitious projects that illustrate the potential of composite materials. Created in 1998, this benchmark program aims to identify, promote, and reward the most innovative composite solutions worldwide. In 28 years, the JEC Composites Innovation Awards have attracted more than 2,200 participating companies from around the world. A total of 269 companies and 811 associated partners have been recognized for the excellence of their innovations.

Epson launches SureColor G9000: high-production Direct-To-Film printer delivering greater productivity and reliability

Epson today announces the launch of the SureColor G9000, a new high-production Direct-To-Film (DTFilm) printer designed to meet growing global demand for flexible and efficient textile transfer printing. Expanding Epson’s DTFilm line-up alongside the SC-G6000, the SC-G9000 introduces enhanced speed, reliability and ease of maintenance for commercial garment decorators and textile producers.

Better Cotton Initiative opens enrollment in the US with promising opportunities for producers

Producer enrollment for the US Program of the Better Cotton Initiative (BCI) is open until May 15 for the 2026-2027 season. With over 2,600 members spanning the cotton supply chain and more than 11,000 users of its Better Cotton Platform (BCP) as of 2025, BCI’s standard is implemented in 15 countries and covers one fifth of global cotton production.

SHIMA SEIKI to exhibit at GMMSA Expo India

Leading Japanese computerized flat knitting technologist SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Indian sales representative Universal MEP Projects & Engineering Services, Ltd., will participate in the upcoming Garments Machinery Manufacturers & Suppliers Association (GMMSA) Expo India 2026 exhibition to be held in Ludhiana, India next month. Through its lineup at GMMSA, SHIMA SEIKI aims to further strengthen its presence within the Indian market with an exhibit that caters to diverse needs, consisting of seam-free WHOLEGARMENT® knitting technology as well as a brand-new shaping machine with high productivity and excellent cost performance.