#Research & Development

2025-11-27

IRG Polymer Recycling wraps up productive 2025 project cycle

Members of the Industry Research Group (IRG) Polymer Recycling © 2025 ITA

The Industry Research Group (IRG) Polymer Recycling has completed another successful project year. Last week, partners from across the textile value chain met at the Institute for Textile Technology (ITA) at RWTH Aachen University for the full-term project meeting.

During the session, the consortium presented and reviewed the results achieved over the past twelve months and defined priorities for the upcoming year. The discussions focused on practical pathways to enable textile-to-textile recycling, highlighting both technological progress and remaining challenges.

The meeting once again demonstrated the strong collaborative spirit within the IRG Polymer Recycling network. The ITA team expressed its appreciation for the constructive cooperation and the shared commitment to driving innovation in textile recycling. Project partners include BASF, Bekaert, EREMA Engineering Recycling Maschinen und Anlagen, Fibrant, REMONDIS Recycling, Technip Energies, Oerlikon Barmag and STADLER Group.

Looking ahead, the IRG aims to continue addressing technological, economic and strategic questions along the entire textile recycling value chain, strengthening cross-industry collaboration and accelerating progress toward a more circular textile system.

The Industry Research Group Polymer Recycling is a long-term cooperation initiative between companies active in textile recycling, ITA Technologietransfer GmbH and the Institute for Textile Technology of RWTH Aachen University.

Organisations interested in joining the project are invited to contact Ricarda Wissel for further information.

Sustainable athletic wear made from bio-based Polyethylene

Conventional sports textiles made from petroleum-based synthetic fibres are to be replaced in the future by sustainable, bio-based, cooling textiles. Polyethylene, previously used mainly in the packaging industry, is thus qualified for use in textiles and, as a bio-based drop-in solution, offers a cost-effective, sustainable alternative for the future.

Small tolerances, big impact and a recyclable alternative to elastane

ITA Master's student Janne Warnecke investigated tension differences over the fabric width in the weaving process and thereby contributed to quality assurance; ITA Bachelor's student Jasmin Roos found a basis for the development of recyclable yarns and textiles. For these developments, they were awarded the Walter Reiners Foundation's Promotion and Sustainability Prizes on 27 November. Peter D. Dornier, Chairman of the Walter Reiners Foundation, presented the awards at the Aachen-Dresden-Denkendorf International Textile Conference (ADD-ITC) in Aachen, Germany.

Aachen Summer School: Strengthening German-Korean cooperation in 4D and robotics

The Aachen Summer School has established itself as an important platform for promoting cooperation between RWTH Aachen University and Seoul National University. The focus is on practice-oriented research projects in the field of 4D and robotics technologies, which have been successfully implemented for years at the Institut für Textiltechnik of RWTH Aachen University.

Innovation center for textile circular economy inaugurated

Just over eight months after the foundation stone was laid, the new Innovation Center for Textile Circular Economy was officially inaugurated today at TITK Rudolstadt. Thuringia's Minister President Mario Voigt, TITK Director Benjamin Redlingshöfer, and other guests of honor cut the ribbon to the modern building complex and viewed the premises, which are now ready for occupancy. The “DICE – Demonstration and Innovation Center for Textile Circular Economy” is TITK's largest single investment to date. The Free State of Thuringia supported the total cost of €11.5 million with €8 million in GRW and FTI funding.

Sustainable design of Geosynthetics and roof underlayments made from recyclates

Is it possible to recover plastic recyclates from previously unused waste streams in order to produce high-quality fibers and films? How can bio-based polymer fibers be manufactured so as to allow adjustable biodegradability? These are the questions being addressed by researchers from the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE in the Zirk-Tex project.

More safety and comfort for protective clothing thanks to auxetic fabrics

When everyday materials are pulled, they stretch or elongate in the direction of the pull and become narrower in cross-section. We can also observe this property in two-dimensional textiles. Auxetic structures behave differently here. They have the striking property of not changing under tensile stress or even increasing their width or thickness. These properties are advantageous, for example, in protective textiles or textile filter media. The DITF are researching auxetic fabrics for various applications.

Fraunhofer CCPE presents the “Monomaterial Design Set” – Innovative solutions for circular product design

Composite materials made from different types of plastic often extend the lifetime of products but make recycling more difficult in the circular economy. That is why Fraunhofer CCPE has developed the “Monomaterial Design Set”. This new approach helps to reduce the variety of plastics used in durable products and offers circular solutions for designers and product developers.

VIATT 2026 announces inaugural lifestyle Trend Forum: Unified vision for S/S 2027 across fashion, home, and tech

The Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) is set to host its first Trend Forum, offering a forward-looking, industry-wide perspective for Spring / Summer 2027. With the show scheduled from 26 – 28 February 2026 at the Saigon Exhibition and Convention Center (SECC), VIATT’s trend curators – NellyRodi™ Agency and MUSEATIVE – will provide comprehensive insights across the interconnected realms of Apparel Fabrics & Fashion, Home & Contract Textiles, and Technical Textiles & Technologies.

Precision jet dyeing moves towards industrial scale as Alchemie partners with Acatel

BTMA member Alchemie Technology, the pioneer of precision jet dyeing solutions based in Cambridge, UK, is partnering with Acatel, the Portuguese leader in sustainable textile manufacturing. The two companies will work together to validate and optimise Alchemie’s Endeavour system for knitted cellulosic fabrics.