[pageLogInLogOut]

#Raw Materials

Commission announces actions to make Europe's raw materials supply more secure and sustainable

Today, the Commission presents an Action Plan on Critical Raw Materials, the 2020 List of Critical Raw Materials and a foresight study on critical raw materials for strategic technologies and sectors from the 2030 and 2050 perspectives. The Action Plan looks at the current and future challenges and proposes actions to reduce Europe's dependency on third countries, diversifying supply from both primary and secondary sources and improving resource efficiency and circularity while promoting responsible sourcing worldwide.

The actions will foster our transition towards a green and digital economy, and at the same time, bolster Europe's resilience and open strategic autonomy in key technologies needed for such transition. The List of Critical Raw Materials has been updated to reflect the changed economic importance and supply challenges based on their industrial application. It contains 30 critical raw materials. Lithium, which is essential for a shift to e-mobility, has been added to the list for the first time.

Maroš Šef?ovi?, Vice-President for Interinstitutional Relations and Foresight said:

" A secure and sustainable supply of raw materials is a prerequisite for a resilient economy. For e-car batteries and energy storage alone, Europe will for instance need up to 18 times more lithium by 2030 and up to 60 times more by 2050. As our foresight shows, we cannot allow to replace current reliance on fossil fuels with dependency on critical raw materials. This has been magnified by the coronavirus disruptions in our strategic value chains. We will therefore build a strong alliance to collectively shift from high dependency to diversified, sustainable and socially-responsible sourcing, circularity and innovation".

Thierry Breton, Commissioner for Internal Market said: "A number of raw materials are essential for Europe to lead the green and digital transition and remain the world's first industrial continent. We cannot afford to rely entirely on third countries – for some rare earths even on just one country. By diversifying the supply from third countries and developing the EU's own capacity for extraction, processing, recycling, refining and separation of rare earths, we can become more resilient and sustainable. Implementing the actions that we propose today will require a concerted effort by industry, civil society, regions and Member States. We encourage the latter to include investments into critical raw materials into their national recovery plans."

The Action Plan on Critical Raw Materials is aimed to:

  • develop resilient value chains for EU industrial ecosystems;
  • reduce dependency on primary critical raw materials through circular use of re-sources, sustainable products and innovation;
  • strengthen domestic sourcing of raw materials in the EU;
  • diversify sourcing from third countries and remove distortions to international trade, fully respecting the EU's international obligations.






Commission announces actions to make Europe's raw materials supply more secure and sustainable

To achieve these objectives, today's Communication outlines ten concrete actions. First, the Commission will in the coming weeks establish a European Raw Materials Alliance. By bringing together all relevant stakeholders, the alliance will primarily focus on the most pressing needs, namely to increase EU resilience in the rare earth and magnet value chains, as this is vital to most of EU industrial ecosystems, such as renewable energy, defence and space. Later, the alliance could expand to address other critical raw material and base metal needs over time.

To make better use of domestic resources, the Commission will work with Member States and regions to identify mining and processing projects in the EU that can be operational by 2025. A special focus will be on coal-mining regions and other regions in transition, with special attention to expertise and skills relevant for mining, extraction and processing of raw materials.

The Commission will promote the use of its earth-observation programme Copernicus to improve resource exploration, operations and post-closure environmental management. At the same time, Horizon Europe will support research and innovation, especially on new mining and processing technologies, substitution and recycling.

In line with the European Green Deal, other actions will address the circularity and sustainability of the raw materials value chain. The Commission will therefore develop sustainable financing criteria for the mining and extractive sectors by the end of 2021. It will also map the potential of secondary critical raw materials from EU stocks and wastes to identify viable recovery projects by 2022.

The Commission will develop strategic international partnerships to secure the supply of critical raw materials not found in Europe. Pilot partnerships with Canada, interested countries in Africa and the EU's neighbourhood will start as of 2021. In these and other fora of international cooperation, the Commission will promote sustainable and responsible mining practices and transparency.


More News from TEXDATA International

#ITM 2026

ITM 2026: The new geography of textile production

New production hubs are emerging across North Africa and Central Asia, while Türkiye is accelerating its transformation toward higher-value, technology-driven and more sustainable textile manufacturing.

#Research & Development

“Production is a product”

From technical textiles and AI-driven robotics to the limitations of textile circularity: Professor Dr Thomas Gries looks back on more than two decades of development at ITA Aachen. In the interview, he explains why production technology remains a decisive success factor, discusses international collaborations and innovation ecosystems, and shares his views on the transformation of production landscapes and the challenges facing an increasingly regulated industry.

#Knitting & Hosiery

“We need to move away from the price trap and return to a value-driven mindset.”

With its new Textile Innovation Center, KARL MAYER is sending a strong signal for innovation, collaboration, and the future of textile applications. In this interview, Karl Josef Mayer discusses new opportunities in warp knitting, the processing of staple fibres, recycling, the changing role of machinery manufacturers, and why the textile industry must once again focus more strongly on the value of textiles. by Oliver Schmidt

#Associations

“Innovation, resilience and international experience remain the great strengths of the Swiss textile machinery industry”

Geopolitical uncertainty, growing competitive pressure from China, new free trade agreements and the shift towards a circular economy are currently reshaping the global textile industry. In this interview, Cornelia Buchwalder discusses the current mood within the Swiss textile machinery sector, the industry’s distinctive innovative strength, new market opportunities in India and Asia, and the technological trends that could shape the upcoming trade fair cycle leading up to ITMA 2027.

More News on Raw Materials

Latest News

#Associations

Mario Jorge Machado re-elected President of EURATEX

The EURATEX General Assembly has re-elected Mario Jorge Machado as President of EURATEX, renewing its confidence in his leadership at a crucial moment for the European textile and clothing industry. The sector is facing rising costs, global competitive pressure and an increasingly challenging transition towards sustainability and digitalisation.

#ITM 2026

ITM 2026 makes happy participants with its international and qualified visitor profile

ITM 2026 International Textile Machinery Exhibition, one of the most prestigious meeting points of the textile machinery sector, attracted attention in its first three days, particularly with its diverse international visitor numbers. Industry professionals from all over the world had the opportunity to closely examine the latest technology machines and solutions displayed in operation. Thousands of visitors from approximately 100 countries, primarily Egypt, Pakistan, India, Uzbekistan, Syria, Turkmenistan, Tajikistan, Morocco, Algeria, and Tunisia, met at the Tüyap Fair and Congress Center for new investment and cooperation opportunities.

#ITM 2026

KARL MAYER presents a textile TEXTRONIC® innovation at ITM 2026

With highly efficient machines and continuous textile innovations, KARL MAYER underscores its role as a reliable partner for discerning top-tier customers. Just in time for ITM 2026 in Istanbul, the industry leader is introducing a true innovation: an eyelash lace with its characteristic fringed look – combined with a previously unattainable 4-way stretch. While the established fabric could until now only be produced as rigid version or with one-dimensional stretch, the new elasticity in both dimensions expands the possibilities for cross-band panel fabrics.

#Man-Made Fibers

DYNEEMA® and NP Aerospace advance personal protection for military servicewomen

Dyneema®, owned by Avient Corporation, an innovator of materials solutions, is supplying its high-performance unidirectional (UD) materials to world-leading armor manufacturer NP Aerospace, enabling the production of armor systems designed specifically to fit the female body. With 2,000 new armor systems, including 4,000 plates, made in the United Kingdom (UK) and delivered in June 2026, this collaboration addresses a long-standing lack of high-quality personal protection specially built for female defense and security personnel.

TOP