[pageLogInLogOut]

#Natural Fibers

Special Issue: A research review on the Cotton Jassid

The Indian cotton jassid, Amrasca biguttula, has been a plague on the global cotton industry multiple times in recent years — in Iraq (2017), West Africa (2021–2022), Puerto Rico (2023) — and is now a serious concern for the United States and multiple other cotton-producing nations.

ICAC Chief Scientist, Dr Keshav Kranthi, highlights the history of a pest he calls "an unfortunate global citizen" due to its ability to spread from region to region. "This polyphagous pest has now infiltrated cotton-growing regions worldwide, from the dry fields of West Africa to the Caribbean islands and the southeastern United States," Dr Kranthi, editor of The Recorder, says in his opening letter. "For over a century, it has plagued Asia and Oceania, spanning from Iran to Japan and Micronesia, where it feeds on a broad array of economically vital crops, including cotton."

This edition of The ICAC Recorder features a single, in-depth, scientific review article — a comprehensive 45+ page treatise co-authored by Dr Keshav Kranthi and Dr Sandhya Kranthi, distinguished agricultural scientists with over 34 years of expertise in cotton research, technology development, and extension for smallholder farmers.

The article presents an extensive synthesis of knowledge on the cotton jassid, covering a broad spectrum of topics, including:

+++ Historical overview, taxonomy, and global distribution,

+++ Biology of the pest, reproductive dynamics, modes of dispersal, damage potential, and host range,

+++ Influence of agronomic factors such as sowing dates, fertilizers, pesticides, crop density, weather, and ecosystem interactions on pest incidence,

+++ Surveillance and scouting methods, damage grading systems, economic thresholds, and integrated pest management (IPM) and insecticide resistance management (IRM) strategies,

+++ Mechanisms of host plant resistance and breeding strategies for developing resistant cultivars, and

+++ Management approaches involving resistant varieties, agronomic practices, trapping methods, biological control, and the use of botanical, microbial, and chemical pesticides.+++ 

The jassid threat shows no signs of abating, and as Dr Kranthi says in the conclusion to his opening editorial, "Global collaboration is essential to combat this 'global citizen' before it exacts further tolls."

In addition to this special edition of The Recorder, the ICAC has created a special session to address the jassid at the upcoming 83rd Plenary Meeting (Mwanza, Tanzania, Nov 17-20, 2025, see agenda and register here). Entitled "Brain-storming on Combating the Global Jassid Invasion," the Third Open Session features six expert speakers and will be held Nov 18 from 12:30-2:30 PM.

To read the free September 2025 issue of The ICAC Recorder, please click here:

https://icac.org/wp-content/uploads/2025/10/Recorder-September-2025.pdf


More News from International Cotton Advisory Committee (ICAC)

#Raw Materials

ICAC projects slight decline in production, relative stability for consumption

Global cotton production is projected to decline by 4% in the 2026/27 season to 24.8 million tonnes, while consumption is expected to remain relatively steady at 25.0 million tonnes, according to the March 2026 edition of Cotton This Month.

#Europe

ICAC to support European Commission on pending PEF legislation

The International Cotton Advisory Committee (ICAC) is proud to announce that it has been included as a member of the European Commission’s Technical Advisory Board (TAB) on the Product Environmental Footprint methodology. The Commission developed the Product Environmental Footprint (PEF) to assess and communicate the life cycle environmental performance of products and organizations.

#Natural Fibers

ICAC to collaborate with Uzbekistan and Bizpando on regenerative agriculture

The Government of Uzbekistan has allocated 55,000 hectares of land to implement a regenerative agriculture program for cotton as part of a collaborative project with the International Cotton Advisory Committee (ICAC) and Bizpando, a company with a a blockchain-based internet platform designed to ensure supply chain compliance.

#Natural Fibers

Bangladesh becomes World's largest importer in 2024/25 after China cuts imports by 65% to 1.1 million tonnes

As we prepare to turn the calendar on 2025, world cotton lint production currently is estimated to be about 25.4 million tonnes — roughly the same as the last season — surpassing the world cotton lint consumption by 392,000 tonnes.

More News on Natural Fibers

#Raw Materials

Beyond the wardrobe – innovative cotton takes the spotlight

Cotton can do more – a lot more. Cutting-edge textiles and high-tech products made from 100% cotton prove just how powerfully performance and sustainability can come together. That very surge of innovation is front and centre at the 38th Bremen Cotton Conference, taking place March 25–27, 2026, at Bremen’s Parliament on the historic market square – culminating in a bold and dedicated closing session on Friday. In the spotlight: performance upgrades for pure cotton, smart strategies for circular textile waste solutions, and pioneering concepts for demanding technical applications. From natural fibre–reinforced composites to highly effective flame-retardant solutions, cotton steps out of the closet and shows the future potential woven into every fibre.

#Spinning

Measure and control the fiber – optimize yarn quality

Producing consistent yarn quality is an everyday challenge – and a very difficult one. Detailed knowledge and understanding of the fiber raw material is absolutely critical to achieving the best possible quality in the yarn. To help spinners, Uster experts have put together guidelines for avoiding yarn irregularity claims, in a special edition of the Uster News Bulletin.

#Raw Materials

Esquel Group adds two new extra-long staple cotton varieties approved

Esquel Group’s Xinjiang Research & Development Center has successfully developed two new Sea Island cotton (Extra-Long-Staple cotton, ELS cotton) varieties named “Yuan Loong 37” and “Yuan Loong 42,” which have been officially approved and granted registration numbers. Both varieties have also obtained Plant Variety Rights certificates, marking another significant breakthrough for the Group in cotton breeding and commercial application.

#Raw Materials

Aid by Trade Foundation reaches new milestones in supply chain transparency

The Aid by Trade Foundation (AbTF) is reaching new milestones as it leads the way towards greater physical traceability for Cotton made in Africa® (CmiA) cotton. With around 700 suppliers and producers in a total of 25 countries, the Aid by Trade Foundation has reached a new record number of partners who can trace CmiA cotton from the product back to its origin. This is more than double the previous year’s figure.

Latest News

#Techtextil 2026

Knowledge that drives progress: Techtextil and Texprocess forums strengthen the global textile industry with a future-oriented programme

From AI-supported production optimisation and digital manufacturing solutions to circular technologies and bio-based high-performance materials: the Techtextil and Texprocess forums provide answers to the key challenges of the global textile industry with a curated content programme. As hubs for innovation and knowledge, they enhance competitiveness and offer orientation in changing markets. From 21 to 24 April 2026, Frankfurt is once again the global meeting point for thought leaders from industry, research and business.

#Techtextil 2026

Enhanced protection without added weight: Innovative technology for flame-retardant textiles doubles reaction time and ensures high wearing comfort

Flame-retardant textiles have long faced the same dilemma: the higher the level of protection, the greater the compromise in comfort, weight and breathability. This is especially important for workwear and protective clothing worn for long hours, where comfort is crucial to wearer acceptance and satisfaction. At Techtextil 2026 in Frankfurt, Swiss company Textilcolor AG will unveil pyroshell™, an innovative flame-retardant technology designed to tackle this challenge. Protection is provided by a graphite-based functional layer integrated into the textile structure, which doubles the reaction time before burns occur while significantly enhancing comfort. The material does not release any toxic fumes and offers textile manufacturers entirely new opportunities to design and produce protective and functional garments. It is also durable enough to withstand up to 50 industrial washes.

#Composites

JEC WORLD 2026 opens: Paris becomes the World Capital of composites

JEC World 2026 opens tomorrow, March 10, at Paris Nord Villepinte, bringing together the entire composites ecosystem for three days of exhibitions, conferences, technical sessions, strategic industry gatherings, and business meetings. As the “festival of composites”, JEC World is also a destination for a broad spectrum of other professional visitors, eager to discover how these advanced materials can offer sustainable solutions to their industries.

#Spinning

Barmag presents the next generation of POY production – energy-efficient and partial-automated

With POY 2.0, Barmag is introducing a completely redesigned spinning concept that takes the production of partially oriented yarn (POY) to a new level in terms of technology and economy. The solution, which was presented to a selected audience of experts for the first time at ITMA Asia + CITME 2025, was met with great enthusiasm: several yarn producers worldwide immediately expressed their interest in a pilot plant.

TOP