[pageLogInLogOut]

#ITMA Asia + CITME Singapore 2025

All systems go for Sweden’s imogo in Singapore

The Dye-Max system at imogo’s new showroom in Sweden © 2025 imogo
With a new strategic partner, its showroom now open in Sweden, and the successful commissioning of a Dye-Max spray dyeing system for a key H&M supplier in Bangladesh, imogo is looking to make a splash at next week’s ITMA Asia+CITME in Singapore (October 28-31).


Compared to conventional jet dyeing, impressive savings can be achieved with imogo’s Dye-Max, which is based on a series of spray cassettes with precision nozzles for accurate and consistent coverage combined with a patented pro-speed valve that controls the volume to be applied.

“The savings in treatment water the Dye-Max achieves are due to the extremely low liquor ratio of 0.5 litres per kilo of fabric,” explains imogo executive partner and board member Christian Moore. “At the same time, the low liquor ratio and the spray process require considerably less auxiliary chemistry to start with, and all of it is used in the process, which also greatly reduces the production of waste water, with only 20 litres being required for wash at changeovers. The low liquid content in the fabric meanwhile minimises the energy needed for fixation, while meeting industry quality standards and maintaining superior fabric performance.” 

The Dye-Max machine operates without the need for any changes to existing dyeing installations and employs traditional dyes suitable for application at room temperature. 

Blåkläder backing

In addition to ACG Kinna with whom it will share exhibition space in Singapore (stand D106 in Hall 6), imogo now has the support of Swedish workwear specialist Blåkläder.

With fully owned factories in Sri Lanka, Myanmar and Bangladesh, more than 8,000 employees and an annual turnover of SEK 2.7 billion, Blåkläder is one of the world’s leading manufacturers of quality workwear.

Blåkläder already uses dope dyeing, which reduces resource use in the dyeing of synthetic materials such as polyester, while imogo’s technology can also be used for natural fibres such as cotton, linen and viscose.

“Since most of the environmental impact from clothing occurs during manufacturing, it’s vital to develop methods that reduce resource consumption,” says Anders Carlsson, MD of Blåkläder. “Imogo’s groundbreaking technology addresses several of the industry’s toughest sustainability challenges and we naturally want to support that.

“Ninety percent of all the fabric we use comes from only ten carefully selected textile producers and by building long-term, trust-based relationships with them, we are well placed to influence sustainability efforts throughout the value chain.”

New showroom

Imogo’s new showroom and test centre is meanwhile now open and available for demonstrations and trials at the dyehouse of 7H Färgeri in Kinnahult, Sweden

“With this showroom, we are creating a platform for dialogue and collaboration with textile producers, brands and research partners,” says imogo CEO Joacim Wellander. “It enables visitors to see the technology in operation, understand the business impact and explore how innovation can drive transformation in their value chain.”

The facility will also serve as a knowledge hub, supporting technical training, application testing and joint development projects with partners. 

Chorka Textile

In Bangladesh, imogo has successfully installed a Dye-Max system at the plant of Chorka Textile, as part of retail giant H&M’s Green Fashion Initiative to support its key suppliers.

“The installation was handled by our own team and quality results were quickly achieved,” says Christian Moore. “This installation clearly proves that our technology is ready for the global market after years of development and fine-tuning, and working in Bangladesh taught us a lot. We look forward to discussing the opportunities that our technology can provide to mills around the world in Singapore.”




More News from imogo

More News on ITMA Asia + CITME Singapore 2025

#ITMA Asia + CITME Singapore 2025

India becomes growth engine for the warp knitting industry

ITMA ASIA 2025 exceeded all expectations for KARL MAYER – above all thanks to the strong interest from India: around 30% of the qualified discussions were held with partners from this traditional textile country. The response underlines the growing importance of the Indian market, which could become the second largest sales region for KARL MAYER after China. The warp knitting industry in particular is developing dynamically.

#India ITME 2026

India ITME Society pushes trade & technology alliances in Singapore

India ITME Society hosted India Networking Program - Fabricating the Future of Textile Industry- From Heritage to High-Tech” on 29th October 2025 at Singapore an exclusive gathering of Ministry of Textile Officials, Embassy Officials, Entrepreneurs, Technocrats, Industry Organizations and Media Personnel's designed to foster collaboration, exchange ideas and explore opportunities in the Indian Textile & Textile Engineering Sector.

#ITMA Asia + CITME Singapore 2025

Innovation and customer proximity – KARL MAYER’s clear focus makes an impression

ITMA ASIA in Singapore was a resounding success for KARL MAYER, exceeding all expectations. The company welcomed visitors from 39 countries and held around 570 expert discussions. Most guests came from India, followed by China, Indonesia and Pakistan. The exchange with them was both well-founded and targeted. Conversation topics ranged from investment projects and new technologies to opportunities for cooperation and business expansion.

#ITMA Asia + CITME Singapore 2025

Singapore edition of ITMA ASIA + CITME makes successful presentation

The region’s leading textile and garment technology exhibition, ITMA ASIA made a successful return to Singapore after two presentations in 2001 and 2005.

Latest News

#Nonwovens

25 years in the room: EDANA’s OUTLOOK™ returns to Cascais to shape a changing industry

The market does not wait, and it does not grant easy answers. Across the absorbent hygiene, personal care, and wipes sectors, business is undergoing a period of intense, necessary adjustment. New European rules on packaging, single-use items, product safety, and end-of-life are forcing companies to drop old assumptions about materials and performance. At the same time, producers must keep their goods safe, reliable, and affordable for the babies and aging adults, who rely on them every day.

#Recycling / Circular Economy

Recover™ names Enes Adak and Fehmi Yüksel as Co-CEOs to accelerate its next growth phase

Recover™, a leading materials science company and global producer of consistent high-quality, recycled cotton fibers and circular material solutions at scale, today announced the appointment of Enes Adak and Fehmi Yüksel as Co-Chief Executive Officers. This leadership transition marks an important step in Recover’s evolution as the company enters its next stage of development.

#Research & Development

ADD-ITC 2026 highlights strong industry participation

The Aachen-Dresden-Denkendorf International Textile Conference (ADD-ITC) 2026 will place a strong focus on the exchange between textile research and industry when it takes place on November 26–27, 2026, at the International Congress Center Dresden. According to the preliminary conference program, more than two-thirds of all presentations will be contributed by companies or jointly presented by industry and research institutions.

#Recycling / Circular Economy

Arc'teryx introduces System 0™, a new framework for the future of product design and circularity

Arc'teryx Equipment, the global design company specializing in technical high-performance apparel and equipment, today introduced System 0™, a new framework that reimagines how products can be designed, manufactured, used, repaired, and ultimately regenerated. System 0 represents the next evolution for sustainability in the outdoor industry, as it embeds circular thinking across an entire product lifecycle while maintaining the uncompromising performance standards that define the Arc’teryx brand.

TOP