[pageLogInLogOut]

#Composites

Ecurie Aix unveils race cars for the new season

In the rooms of the Aachener Quellenhof, the Ecurie Aix (Formula Student Team of RWTH Aachen University) presented their new racing cars: eace07.d "Rita" and eace09 "Nuri". © 2020 Ecurie Aix / RWTH Aachen University
The electrically driven vehicle "Nuri" convinces with a weight of only 158.2 kg. Compared to last year, the weight of the monocoque could even be reduced by 24 percent. In addition, a highly integrated LV system, a new control system, a 6 kWh 600 V HV battery and an aerodynamic package optimised for cornering have been installed.

In the coming season, "Rita" will compete in the autonomous, i.e. driverless, competition class. For this purpose, the racing car is equipped with a fully synchronised perception setup, a 40-channel LiDAR sensor, 3 mono cameras with global shutter, an implemented graph slam algorithm, and a vehicle computer with XEON E-2288 G.

ITA supports the team in the production of the high-performance components made of carbon fibre reinforced plastics.

ITA congratulates the team of Ecurie Aix on this great achievement and wish them every success for the upcoming Formula Student season!


Roll out Ecurie Aix (Yanick Schlesinger, Hannah Dammers, Professor Thomas Gries, from left to right, all members of ITA) © 2020 Ecurie Aix / RWTH Aachen University
Roll out Ecurie Aix (Yanick Schlesinger, Hannah Dammers, Professor Thomas Gries, from left to right, all members of ITA) © 2020 Ecurie Aix / RWTH Aachen University


More News from Institut für Textiltechnik of RWTH Aachen University (ITA)

#Research & Development

Networking Day 2026: Industry stakeholders unite around textile recycling

In 2026, the Industry Research Group (IRG) Polymer Recycling once again brought together some of the key stakeholders in textile recycling for its annual Networking Day. This year, the event took place at EREMA’s premises in Ansfelden, Austria. It brought together key players from across the textile recycling value chain for a day of structured exchange and in-depth discussions.

#Research & Development

2026 general meeting of the Friends and Supporters of RWTH Aachen at ITA

The Friends and Supporters of RWTH Aachen e. V. (proRWTH) looked back on a successful year of support at their 2026 general meeting. The meeting took place at Institut für Textiltechnik (ITA) of RWTH Aachen and was combined with a joint session of the Executive Board and the Administrative Board. Before the general meeting began, participants were given a guided tour of ITA, providing them with fascinating insights into current research and development topics in textile engineering.

#Research & Development

TERNAfil wins first place at PitchMiUp Night 2026 in Minden

The RWTH spin-off TERNAfil has developed MAXCarbon, a new high-performance hybrid fibre that combines the mechanical performance of carbon with the temperature and corrosion resistance of ceramic materials. For this development, TERNAfil was awarded first prize at the PitchMiUp Night in Minden on 21 May 2026.

#Research & Development

Carbon-ceramic hybrid fibre proves its worth – NRW Minister for Science Mona Neubaur congratulates ITA start-up TERNAfil

MAXCarbon technology, a novel carbon-ceramic hybrid fibre developed by ITA spin-off TERNAfil, secured third place at the HIGH-TECH.NRW Demo Day on the TÜV NORD campus in Essen. The technology combines the strength of carbon fibres with the temperature and corrosion resistance of ceramic materials. Mona Neubaur, Minister for Science in North Rhine-Westphalia, congratulated the team on their success and on winning prize money of 4,000 euros.

More News on Composites

#Composites

Fewer pores, greater impact tolerance: Peter Dornier Foundation Prize 2026 honours material research on fibre-reinforced composite components for aerospace industry

Microscopically small pores that form during manufacture, or barely visible impact damage, can severely impair the load-bearing capacity and service life of fibre-reinforced composite components. Two young researchers have presented groundbreaking work in this field and will both be awarded the 2026 Peter Dornier Foundation Prize: Dr.-Ing. Benedikt Neitzel from the Technical University of Ilmenau for his doctoral thesis on pore minimisation in the RTM process, and Johanna Buschmann, M.Sc., for her master’s thesis, completed at the German Aerospace Centre, on the improved impact tolerance of 3D fabrics compared to 2D laminates.

#Composites

Carbon Revolution wins Composites Australia Engineering Team Excellence Award

Carbon Revolution has won the Engineering Team Excellence Award at the 2026 Composites Australia Annual Industry Awards.

#Composites

JEC Forum Southeast Asia 2026 highlights Taiwan as a strategic hub for the global composites industry

The third edition of JEC Forum organized in Southeast Asia brought together 350+ participants from 22 countries for three active days of high-level Business Meetings, conferences, and networking, emphasizing Southeast Asia’s growing role in the global composites market. Held for the first time in Taipei from 23 to 24 June 2026, following the successful first editions in Bangkok, JEC Forum Southeast Asia 2026 confirmed its position as the region’s leading business platform dedicated to the composites industry.

#Composites

MEL Composites supports ELA Aviation with advanced composite materials

MEL Composites is supplying advanced composite materials and process consumables to ELA Aviation for the production of its next-generation gyroplanes. The collaboration underlines MEL Composites’ growing role in advanced aerospace mobility, providing lightweight materials designed to improve aircraft performance, manufacturing efficiency and structural reliability.

Latest News

#Yarn & Fiber

Expansive innovations converge in Shanghai as Yarn Expo Autumn 2026 opens doors next week

With just days to go, industry enthusiasm is building for the opening of Yarn Expo Autumn, Asia’s premier yarn and fibre trade fair, running from 25 – 27 August at the National Exhibition and Convention Center (Shanghai). Across 27,000 sqm in Hall 8.2, buyers will find nearly 600 exhibitors from 14 countries and regions, spread across seven specialised zones that range from cutting-edge man-made and regenerated fibres to time-honoured cashmere and silk. Beyond the extensive sourcing options, a fringe programme of trend showcases, presentations and product launches rounds out the three¬day event with design, innovation and market intelligence.

#Carpets

DOMOTEX Southeast Asia 2026 - Building the Gateway to ASEAN's fast-growing flooring market

From 11–13 November 2026, the inaugural DOMOTEX Southeast Asia will take place at BITEC (Bangkok International Trade & Exhibition Centre) in Bangkok, Thailand. Jointly organized by GLOBUS Events Limited and Hannover Milano Fairs Shanghai Ltd., with Worldex G.E.C. Co., Ltd. as the local partner, the exhibition marks the expansion of the internationally recognized DOMOTEX brand into Southeast Asia. As the newest addition to the global DOMOTEX portfolio, the exhibition has been developed specifically to serve the rapidly evolving ASEAN market, creating a dedicated business event for the flooring and interior finishing industry.

#Sustainability

Execs help steer Cascale’s consumer goods agenda in Athens

The 2026 Cascale Annual Meeting, taking place September 15–17 in Athens, Greece, will convene leaders from across the global consumer goods value chain to tackle one of the industry’s defining questions: how to accelerate meaningful, system-wide transformation. Guiding those conversations as this year’s co-chairs are Sean Cady, vice president, global sustainability, responsibility, trade, and government affairs at VF Corporation, and Dr. Delman Lee, vice chair at TAL Apparel Limited.

#Research & Development

MELANGE starts with a co-creative design workshop at Aalto University to shape the visual identity of this new project transforming colouration in textiles

Over the next three years, MELANGE will lower the environmental impact of interior textile production by moving colour design to the beginning of the manufacturing process. This Horizon Europe project officially started on 1 August 2026, and will be publicly launched on 27 August 2026.

TOP