#Composites

2019-11-14

Chomarat provides Arcona Yachts with C-PLYTM carbon reinforcement

Chomarat Group, expert in composite reinforcements for the marine market developed a high performing C-PLYTM reinforcement for the hull and deck of Arcona 435 and 465. Both cruiser-racer are a unique combination of comfort onboard and performances, for fast family cruising and high-level races thanks to their specific design, and the use of C-PLYTM. The carbon NCF reinforcement allows structural design benefits, premium surface quality and overall parts cost saving.

“With 45 years of expertise, Chomarat is a pioneer in developing solutions to achieve weight reduction, improved surface appearance and stronger structure. C-PLYTM makes it possible to meet these specifications, while ensuring stable quality and cost-effectiveness” explains Vincent Cholvy, Marine market Manager at Chomarat.

THE CUTTING-EDGE TECHNOLOGY FOR SERIAL PRODUCTION OF CARBON BOATS

A study was led to determine the optimal construction to develop a high performing C-PLYTM range for a better permeability in infusion process. The result is a carbon NCF that achieves high mechanical performances, multi resins compatibility and cost efficiency. “Chomarat is the best choice for supplying the product our factory prefers to work with: stable quality and cost effectiveness are the key benefits” explains Nicolas Broberg, Managing Director Arcona Yacht.

Infusion technology for hull and deck with up to 70% level of carbon in the laminate gives the greatest possible strength.

C-PLYTM: LIGHTWEIGHT AND STRENGTH FOR MARINE APPLICATIONS

The carbon range used for the latest model of Arcona Yachts, Arcona 435, allows that it can literally be raced on high levels one day fully standard and be family cruising the next day without customizations. The model even won the prestigious award of European Yacht of The Year in 2019, in the Performance Cruiser class. “The carbon construction makes it possible as we get a stiffer, lighter and managing calculated loads on higher levels than glass fibers. C-PLYTM is essential to us to get the calculated strength without adding extra weight or thickness to the laminate. It gives a cost-effective solution in production as reaching a high strength with fewer layers.”, Nicolas Borberg adds.

For the Arcona 465 model, carbon as a primary construction material makes the yacht successful on the race, and light enough to give initial allowance for the extra gear needed for any blue water cruising “and you can expect the performance of an unladen glass fibre yacht of the same size!” he concludes.

DISCOVER THE CHOMARAT INNOVATIVE CARBON SOLUTIONS

FOR STRUCTURAL PARTS IN MARINE APPLICATIONS

DURING METSTRADE SHOW, AMSTERDAM, NOV.19-21, 2019, STAND CMP 10 EL

“Production is a product”

From technical textiles and AI-driven robotics to the limitations of textile circularity: Professor Dr Thomas Gries looks back on more than two decades of development at ITA Aachen. In the interview, he explains why production technology remains a decisive success factor, discusses international collaborations and innovation ecosystems, and shares his views on the transformation of production landscapes and the challenges facing an increasingly regulated industry.

“We need to move away from the price trap and return to a value-driven mindset.”

With its new Textile Innovation Center, KARL MAYER is sending a strong signal for innovation, collaboration, and the future of textile applications. In this interview, Karl Josef Mayer discusses new opportunities in warp knitting, the processing of staple fibres, recycling, the changing role of machinery manufacturers, and why the textile industry must once again focus more strongly on the value of textiles. by Oliver Schmidt

“Innovation, resilience and international experience remain the great strengths of the Swiss textile machinery industry”

Geopolitical uncertainty, growing competitive pressure from China, new free trade agreements and the shift towards a circular economy are currently reshaping the global textile industry. In this interview, Cornelia Buchwalder discusses the current mood within the Swiss textile machinery sector, the industry’s distinctive innovative strength, new market opportunities in India and Asia, and the technological trends that could shape the upcoming trade fair cycle leading up to ITMA 2027.

Fewer pores, greater impact tolerance: Peter Dornier Foundation Prize 2026 honours material research on fibre-reinforced composite components for aerospace industry

Microscopically small pores that form during manufacture, or barely visible impact damage, can severely impair the load-bearing capacity and service life of fibre-reinforced composite components. Two young researchers have presented groundbreaking work in this field and will both be awarded the 2026 Peter Dornier Foundation Prize: Dr.-Ing. Benedikt Neitzel from the Technical University of Ilmenau for his doctoral thesis on pore minimisation in the RTM process, and Johanna Buschmann, M.Sc., for her master’s thesis, completed at the German Aerospace Centre, on the improved impact tolerance of 3D fabrics compared to 2D laminates.

JEC Forum Southeast Asia 2026 highlights Taiwan as a strategic hub for the global composites industry

The third edition of JEC Forum organized in Southeast Asia brought together 350+ participants from 22 countries for three active days of high-level Business Meetings, conferences, and networking, emphasizing Southeast Asia’s growing role in the global composites market. Held for the first time in Taipei from 23 to 24 June 2026, following the successful first editions in Bangkok, JEC Forum Southeast Asia 2026 confirmed its position as the region’s leading business platform dedicated to the composites industry.

MEL Composites supports ELA Aviation with advanced composite materials

MEL Composites is supplying advanced composite materials and process consumables to ELA Aviation for the production of its next-generation gyroplanes. The collaboration underlines MEL Composites’ growing role in advanced aerospace mobility, providing lightweight materials designed to improve aircraft performance, manufacturing efficiency and structural reliability.

PERFORMANCE DAYS announces new focus topic & forums for October 2026

With its upcoming October 13–14, 2026 edition, PERFORMANCE DAYS is placing the spotlight on one of the textile industry’s most important transformations: “Bio-Based Materials – From Fiber to Fabric”, a two-part Focus Topic exploring the future of bio-based innovation across the textile value chain. Part 1, presented in October 2026, will focus on fibers and next-generation material developments, while Part 2 at the March 2027 edition will shift the perspective toward dyeing, finishing, additives, and processing technologies.

Febratex 2026 to be the largest edition of the leading textile trade fair in the Americas with 10 exhibition halls

Febratex 2026 will be the largest edition in the history of the leading textile trade fair in the Americas. Dedicated to the textile and apparel manufacturing industries, the event will take place from August 18–21, 2026, in Blumenau, Santa Catarina, Brazil, with a strong focus on technology, sustainability, and business generation.

Cotton Brazil Dialogues field trip brings international stakeholders closer to Brazil’s cotton production chain

How do you build trust across the global textile value chain? By opening the farm gates. This is the principle behind the Cotton Brazil Dialogues. At the end of July, the programme welcomed its first group of international participants for a five-day immersion into Brazilian cotton production, combining field visits with technical workshops to showcase the quality, sustainability, innovation and traceability behind one of the world’s leading cotton origins.