[pageLogInLogOut]
You can feel it's Benninger!

#Dyeing, Drying, Finishing

Best available technologies (BAT) presented by FONG’S on the CAITME 2013

The Allwin yarn dyeing machine (c) 2013 FONG'S
Economical and sustainable production can only be achieved with the right tools. To succeed in times of pressure it is important to use the right tools- and the best available technologies are always the right choice for a successful business. The latest generation of the THEN AIRFLOW® SYNERGY 8 is the best example of how to make good things even better.

 It is well known that the liquor ratio achieved with the THEN AIRFLOW® principle up to date has not been beaten. The same counts for the versatility of this superior machine. With the latest development the energy consumption can also be reduced not only by the little amount of dyeing liquor to be heated up, but also due to the reduction of the electricity consumption of the blowers. Every tube now has an individual frequency controlled blower with less installed power. All the other advantages of the THEN AIRFLOW® SYNERGY series remain unchanged, which leads to shorter cycling times and substantial savings in water as well as high reproducibility and smooth fabric guiding.

Talking about fabric guiding: The latest development in the field of long tube machines is also coming from FONG’S. With a revolutionary new concept the new long tube machine is about to be launched. For a hydraulic machine the liquor ratio will be setting new standards and also the fabric run can be considered as revolutionary, compliant even for finest qualities.

One of the best available technologies in the field of dyeing and finishing for sure is cold pad batch dyeing with Swimming Rollers. Due to the deflection control by means of a hydraulic oil cushion an even pick up from side to side can be achieved with a perfect reproducibility. The fabric surface remains perfectly clean because the fabric is guided open width- thus crease marks are also no issue. With the new ECONOMICA from GOLLER this concept can also be looked into during the CAITME. A perfect way to safe dyestuff, chemicals, water and energy.

With all the new innovations coming this autumn from FONG’S it is easy to forget about all the other best available technologies like the Allwin yarn dyeing machine with the lowest liquor ratio in the market or the SINTENSA washing machine for open width knitted fabric, where rotors inside the washing drums force the washing liquor through the fabric even at the lowest speed: washing mechanics at its best without any negative impact on the fabric.

FONG’S is the biggest producer of textile machinery for wet finishing worldwide. With nearly 4000 employees and the latest technologies in manufacturing textile machinery the traditional Hong Kong based company is the key player in dyeing and finishing. With GOLLER, MONFORTS, THEN and XORELLA it offers the market leading brands in the sector of continuous as well as discontinuous dyeing and finishing and the conditioning of yarn.

To learn more about best available technologies in the field of wet finishing the booth of TTS (Textile Technology Service) is the place to be at the CAITME 2013. In Pavilion 1, B46 the specialists of FONG’S EUROPE GMBH will attend this exhibition to present the latest technologies in terms to save water, energy and time.

More News from FONG'S Europe GmbH

More News on Dyeing, Drying, Finishing

#Dyeing, Drying, Finishing

Smart Quality Control for Technical Textiles

In the end, what matters is the result: a filter that performs reliably, a membrane that remains stable in storm conditions, a composite material with precisely defined properties. But the path to achieving this is demanding. In the production of technical textiles, numerous parameters interact – and even the smallest deviations can have major consequences.

#ITM 2026

The address for environmentally friendly dyeing and finishing systems: ITM 2026

Dyeing and finishing technologies, one of the most critical and value-added areas of the textile sector, have gained strong growth momentum on a global scale. Technologies that are pioneers of this transformation focused on sustainability, quality and efficiency will meet with sector professionals at the ITM 2026 International Textile Machinery Exhibition. Dyeing and Finishing Hall (11–12) will host the latest technologies that increase efficiency, optimize resource use and reduce environmental impact in textile finishing processes.

#Techtextil 2026

iNTERSPARE presents latest developments and upgrade solutions for technical textile finishing at Techtextil

iNTERSPARE Textilmaschinen GmbH will present its latest solutions for technical textile finishing at Techtextil 2026 in Frankfurt (VDMA joint stand, Hall 12 / Stand C55A). The focus will be on further developments within the Krantz, Artos and Babcock (BTM) product lines, in particular the Krantz K30 stenter as well as the reintroduction of the Artos Vari-Flex foulard. The presentation will be complemented by modular solutions for upgrading existing installations and new approaches in automation and digitalization.

Latest News

#Nonwovens

Temafa Maschinenfabrik GmbH supplies a complete decortication plant for processing hemp straw to Hanffaser Geiseltal eG

Temafa Maschinenfabrik GmbH, a leading supplier of machinery and plants for fibre processing, has successfully secured an order to supply a complete plant for processing hemp straw to Hanffaser Geiseltal eG, based in Mücheln.

#Techtextil 2026

FET’s revolutionary gel spinning system wins Techtextil Innovation Award

FET has received the prestigious Techtextil Innovation Award 2026 in the New Production Technology category. The Techtextil Innovation Award honours outstanding ideas in textile technology, sustainability, AI and the creation of technical textiles, selected by an international jury of experts. Ranging from new materials to new production technologies, this award recognises progressive ideas that are driving forces for numerous industries, such as automotive, medical and construction.

#ITM 2026

Savio Macchine Tessili will exhibit at ITM Istanbul 2026 presenting its flagship technologies

Savio Macchine Tessili will participate in ITM Istanbul 2026 in a corporate booth of Vandewiele Group, showcasing a selection of its most advanced winding and spinning solutions designed to support textile mills in achieving higher efficiency, flexibility and yarn quality. The company will bring to the show three flagship solutions: Proxima Smartconer®, Lybra Smartspinner® and the Phoenix Assembly Winder.

#ITM 2026

Rieter at ITM 2026: Spinning Redefined with Automation and Intelligence

Spinning mills need solutions that deliver stability, efficiency and future-proof performance. Rieter has put together a powerful portfolio for ITM 2026 in Istanbul, Türkiye. These innovations give customers the tools to enhance cost efficiency, improve responsiveness and actively develop their competitive edge. Step-by-step, Rieter is moving closer to its Vision 2027 – the fully automated spinning mill. With each new technology, Rieter enables spinning mills worldwide to operate with greater precision and reliability, ensuring they remain at the forefront of an increasingly demanding global market.

TOP