[pageLogInLogOut]

#Weaving

Gerald Vogt becomes new CEO of the Stäubli Group

Stäubli, a global leader in industrial and mechatronic solutions, is starting the new year with a new Chief Executive Officer. Gerald Vogt, previously responsible for the global business of the Robotics Division, will take over as CEO from Rolf Strebel on January 1, 2021.
  • Gerald Vogt (50) succeeds retiring Rolf Strebel (65) as new CEO of the Stäubli Group
  • Christophe Coulongeat (39) takes over worldwide responsibility for the Robotics Division

With Gerald Vogt, an experienced manager from within the company's own ranks will take over the management of the diversified and growing family-owned company. The 50-year-old Franco-German engineer and business economist has been responsible for the global Robotics business as Group Division Manager since mid-2016 and is already a member of the Group Management.

When he joined Stäubli almost 20 years ago, Gerald Vogt initially moved from the development and production site in Faverges, France, to the US for several years. As Division Manager he significantly expanded business for Stäubli Robotics North America. Afterwards he returned to Faverges as Head of Development before taking over responsibility for the German business as Head of Stäubli Robotics in Bayreuth.

To ensure a smooth transition and prepare for his future tasks as CEO, the Stäubli Board of Directors nominated Gerald Vogt as the designated successor to Rolf Strebel at the beginning of 2020. Since then, Gerald Vogt has accompanied the current CEO and is responsible for the introduction and implementation of the new business strategy for Stäubli until 2030.

"We are delighted to have found in Gerald Vogt a forward-looking manager with an extensive international experience and a clear entrepreneurial spirit who is already very well connected within the Group. He has our full confidence to further advance the business of the entire Stäubli Group worldwide," said Yves Serra, Chairman of the Board of Directors.


"On behalf of the entire Board of Directors and the Stäubli family, I would like to take this opportunity to thank Rolf Strebel for more than 40 years of dedication to Stäubli and his outstanding work as CEO of the Stäubli Group over the past 14 years. We wish him all the best for the time ahead," added Serra.

Gerald Vogt © 2020 Stäubli
Gerald Vogt © 2020 Stäubli


Christophe Coulongeat will assume the global responsibility for the Robotics Division on January 1, 2021. The French manager has been Deputy Division Manager since 2018 and previously gathered extensive experience in the packaging and automation industry in France, Austria, the United Arab Emirates and Switzerland.

With this succession in management, Stäubli is setting the course to consistently pursue its growth and further expand its market position worldwide, especially in North America and Asia.


More News from Stäubli AG

#Weaving

Stäubli demonstrates how innovation translates into real benefits for weaving mills at SITEX 2026

One of India’s most prominent textile industry events, SITEX 2026, is held from February 21 to 23 in Surat. Committed to empowering Indian weaving mills with state‑of‑the‑art solutions tailored to regional needs, Stäubli will present a selection of solutions designed for performance, reliability, and power efficiency. Through its weaving preparation, cam and dobby shedding solutions and Jacquard technologies, Stäubli highlights its global expertise tailored to the specific needs of the local market.

#Composites

Breaking new ground in Technical Textiles: Stäubli at JEC World 2026

Stäubli, a global leader in industrial and mechatronic solutions, will showcase its cutting-edge weaving machinery solutions for technical textiles at JEC World 2026, from 10 to 12 March in Paris-Nord Villepinte.

#ITMA Asia + CITME Singapore 2025

Stäubli showcases advanced weaving technologies at ITMA Asia Singapore 2025

At ITMA Asia 2025 in Singapore, Stäubli will showcase its latest innovations in weaving technology. After several years, the exhibition returns to Singapore — a strategic hub that provides easy access to key textile markets across Southeast Asia. Taking place from 28 to 31 October 2025, this year’s edition focuses on green technologies that promote sustainable development across the textile industry.

#Weaving

Stäubli group expands manufacturing footprint in India with renewable energy connectors

Stäubli, a global leader in industrial and mechatronic solutions, is proud to announce the signing of the establishment of a new manufacturing facility in Bangalore, India.

More News on Weaving

#Weaving

Itema America acquires Palmetto Loom Reed, strengthening local manufacturing and service in the U.S.

Itema America, the U.S. subsidiary of Italy-based Itema Group, has acquired – through an Assets Purchase Agreement – Palmetto Loom Reed, a Greenville, South Carolina-based manufacturer of weaving reeds and one of the last remaining domestic producers of these precision components in the United States.

#Weaving

Itema exhibits the two best-selling high-end rapier weaving machines of the Region, R9500EVO and Galileo-RX at SITEX 2026

Following the opening of its new Surat Service Center in November, Itema will exhibit at SITEX (Stand 286) from February 21st to 23rd at the Surat International Exhibition and Convention Centre (SIECC). Surat has long been one of Itema’s most strategic markets, a role further reinforced by the inauguration of the Surat Service Center last November. Equipped with an advanced electronic repair center, a weaving machine behavior simulator, and a local spare parts warehouse, the new facility strengthens Itema’s presence in the region while bringing the company even closer to its Customers.

#Weaving

Groz-Beckert launches comprehensive Reed Portfolio in Ichalkaranji to advance weaving excellence in India

Groz-Beckert, the world’s leading provider of industrial machine needles, precision parts, and systems for the textile industry, hosted an exclusive customer event titled “Advancing Weaving Excellence – Reed Portfolio Launch” in Ichalkaranji, one of India’s most prominent weaving hubs.

#Weaving

Lindauer Dornier announces leadership transition in weaving machine business

After more than ten successful years at Lindauer DORNIER GmbH, Mr Wolfgang Schöffl will leave the family-owned company at the end of the year to enter well-deserved retirement.

Latest News

#Raw Materials

Esquel Group adds two new extra-long staple cotton varieties approved

Esquel Group’s Xinjiang Research & Development Center has successfully developed two new Sea Island cotton (Extra-Long-Staple cotton, ELS cotton) varieties named “Yuan Loong 37” and “Yuan Loong 42,” which have been officially approved and granted registration numbers. Both varieties have also obtained Plant Variety Rights certificates, marking another significant breakthrough for the Group in cotton breeding and commercial application.

#Recycled_Fibers

Reju announces site selection for French Regeneration Hub in Lacq advancing Europe’s circular textile infrastructure

Reju, the textile-to-textile regeneration company based in France, announces the site selection for an industrial sized Regeneration Hub, in Lacq, in the Pyrénées-Atlantiques, on the Induslacq platform. Reju, a Technip Energies owned company, is deepening its roots in France through the development of this new Regeneration Hub.

#Functional Fabrics

lululemon introduces Unrestricted Power™ — A new sensation for strength training

lululemon (NASDAQ: LULU) has unveiled Unrestricted Power™, a new innovation platform engineered for heavy lifts and demanding gym sessions. The assortment, which launches in North America, is backed by thousands of hours of research and development, providing secure support without compromising comfort and mobility, enabling a distraction-free fit built to match every move.

#Raw Materials

Aid by Trade Foundation reaches new milestones in supply chain transparency

The Aid by Trade Foundation (AbTF) is reaching new milestones as it leads the way towards greater physical traceability for Cotton made in Africa® (CmiA) cotton. With around 700 suppliers and producers in a total of 25 countries, the Aid by Trade Foundation has reached a new record number of partners who can trace CmiA cotton from the product back to its origin. This is more than double the previous year’s figure.

TOP