[pageLogInLogOut]

#Sustainability

Dyntex introduces world’s first ultralight biosynthetic functional fabrics

Dyntex, developer and manufacturer of functional materials based in Bregenz, Austria, has launched two world premieres: DYNTEX® Biodegradable is the world’s first ultralight functional fabric that only takes five years to biodegrade. Dyntex® Biological Origin is also ultralight and made entirely from bio-based raw materials. Leading premium manufacturers of athletic and lifestyle clothing have already expressed their interest in the fabrics.

Environmentally Friendly, Functional Textiles Made of Biosynthetic Yarn and Biodegradable Fabric

Working with specialists from Japan and Italy, Dyntex invested three years into the development of these two extraordinary biosynthetic fabrics. Dyntex CEO Mathias Braun is convinced that “they have what it takes to revolutionize the market for environmentally friendly functional fabrics. Our fabrics set new standards when it comes to athletic, outdoor, and lifestyle apparel.” Premium manufacturers have already shown great interest after initial talks.

Biodegradable in Only Five Years

Dyntex® Biodegradable is the first ultralight functional fabric that is completely biodegradable in just five years. The yarn made of the high-tech polyamide Amni Soul Eco® makes it possible to produce fabrics of the highest quality that weigh only 38 grams per square meter. In addition, they are water-repellent, breathable, fluorocarbon-free, and extremely durable, even under heavy use. With one-of-a-kind tactile properties and exceptional looks, they are perfect for stylish functional clothing.

In a landfill, functional textiles made of Dyntex® Biodegradable materials decompose into CO2, methane, and biomass within just five years – this was verified in a US laboratory that tested anaerobic biodegradation pursuant to the international ASTM D5511 (ISO 15985) standard. Standard polyamides typically take ten times longer to biodegrade. When combined with a biodegradable lining, this makes it possible to manufacture fully biodegradable products.


Completely Organic Yarn

Dyntex® Biological Origin is made entirely from renewable resources, with the castor oil plant serving as the basis for the ultralight functional fabric. A bio-polymer is extracted from the plant that is then used to produce a particularly high-quality yarn. In a special manufacturing process, DYNTEX® uses this yarn to produce ultralight functional fabrics of the highest quality with one-of-a-kind tactile properties and exceptional looks. With this newly developed collection of materials, manufacturers can completely eliminate the use of fossil resources.

The castor oil plant is the perfect raw material for such fabrics. It grows in arid, nutrient-poor soil, requires little water, and is not edible. This means the castor oil plant does not compete with the cultivation of food crops in the agricultural industry.

Environmentally Friendly and of the Highest Quality

According to Dyntex CEO Mathias Braun, the newly developed fabric collection “plays a critical role in protecting the environment for future generations.” Accordingly, he sees tremendous opportunities in the rapidly growing market for environmentally friendly functional textiles. An Italian fashion label will already be releasing the first jackets made with Dyntex fabrics in January.


More News from TEXDATA International

#ITM 2026

ITM 2026: The new geography of textile production

New production hubs are emerging across North Africa and Central Asia, while Türkiye is accelerating its transformation toward higher-value, technology-driven and more sustainable textile manufacturing.

#Research & Development

“Production is a product”

From technical textiles and AI-driven robotics to the limitations of textile circularity: Professor Dr Thomas Gries looks back on more than two decades of development at ITA Aachen. In the interview, he explains why production technology remains a decisive success factor, discusses international collaborations and innovation ecosystems, and shares his views on the transformation of production landscapes and the challenges facing an increasingly regulated industry.

#Knitting & Hosiery

“We need to move away from the price trap and return to a value-driven mindset.”

With its new Textile Innovation Center, KARL MAYER is sending a strong signal for innovation, collaboration, and the future of textile applications. In this interview, Karl Josef Mayer discusses new opportunities in warp knitting, the processing of staple fibres, recycling, the changing role of machinery manufacturers, and why the textile industry must once again focus more strongly on the value of textiles. by Oliver Schmidt

#Associations

“Innovation, resilience and international experience remain the great strengths of the Swiss textile machinery industry”

Geopolitical uncertainty, growing competitive pressure from China, new free trade agreements and the shift towards a circular economy are currently reshaping the global textile industry. In this interview, Cornelia Buchwalder discusses the current mood within the Swiss textile machinery sector, the industry’s distinctive innovative strength, new market opportunities in India and Asia, and the technological trends that could shape the upcoming trade fair cycle leading up to ITMA 2027.

More News on Sustainability

#Sustainability

Execs help steer Cascale’s consumer goods agenda in Athens

The 2026 Cascale Annual Meeting, taking place September 15–17 in Athens, Greece, will convene leaders from across the global consumer goods value chain to tackle one of the industry’s defining questions: how to accelerate meaningful, system-wide transformation. Guiding those conversations as this year’s co-chairs are Sean Cady, vice president, global sustainability, responsibility, trade, and government affairs at VF Corporation, and Dr. Delman Lee, vice chair at TAL Apparel Limited.

#Textiles & Apparel / Garment

SAITEX reports efficiency gains and greater transparency in 2025 Impact Report

Vietnam-based denim manufacturer SAITEX has published its 2025 Impact Report, documenting progress in resource efficiency, chemical management, digital traceability and knowledge sharing across its manufacturing operations in Vietnam and the United States. Rather than focusing on sustainability ambitions, the report presents operational data, manufacturing developments and lessons learned from the past year.

#Raw Materials

Aid by Trade Foundation presents annual report for 2025: Market position and impact of sustainably verified natural fibres strengthened

Despite global supply chain challenges, the Aid by Trade Foundation (AbTF) was able to further expand its international role in promoting sustainably verified natural fibres in 2025. In doing so, the foundation remains true to its fundamental approach of leveraging market forces. Last year, it generated total revenues of EUR 7.8 million; this included EUR 6.7 million collected through the successful marketing of four standards: Cotton made in Africa (CmiA), CmiA Organic, The Good Cashmere Standard (GCS), and the Regenerative Cotton Standard (RCS). AbTF invested the resulting income in projects aiming to protect biodiversity, support women, increase transparency in the textile supply chain, and implement its verification system.

#Sustainability

Textile Exchange reports growth in certifications and industry engagement

Textile Exchange has published its 2025 Annual Report, highlighting continued growth in certified sites, industry participation and the development of its standards and membership structure. According to the report, more than 100,000 sites worldwide are now certified to Textile Exchange standards, more than three times the number recorded in 2020. Preliminary figures also indicate 12% year-on-year growth across the organization's current standards, including the Global Recycled Standard (GRS), Recycled Claim Standard (RCS) and the Responsible Animal Fiber standards.

Latest News

#Yarn & Fiber

Expansive innovations converge in Shanghai as Yarn Expo Autumn 2026 opens doors next week

With just days to go, industry enthusiasm is building for the opening of Yarn Expo Autumn, Asia’s premier yarn and fibre trade fair, running from 25 – 27 August at the National Exhibition and Convention Center (Shanghai). Across 27,000 sqm in Hall 8.2, buyers will find nearly 600 exhibitors from 14 countries and regions, spread across seven specialised zones that range from cutting-edge man-made and regenerated fibres to time-honoured cashmere and silk. Beyond the extensive sourcing options, a fringe programme of trend showcases, presentations and product launches rounds out the three¬day event with design, innovation and market intelligence.

#Carpets

DOMOTEX Southeast Asia 2026 - Building the Gateway to ASEAN's fast-growing flooring market

From 11–13 November 2026, the inaugural DOMOTEX Southeast Asia will take place at BITEC (Bangkok International Trade & Exhibition Centre) in Bangkok, Thailand. Jointly organized by GLOBUS Events Limited and Hannover Milano Fairs Shanghai Ltd., with Worldex G.E.C. Co., Ltd. as the local partner, the exhibition marks the expansion of the internationally recognized DOMOTEX brand into Southeast Asia. As the newest addition to the global DOMOTEX portfolio, the exhibition has been developed specifically to serve the rapidly evolving ASEAN market, creating a dedicated business event for the flooring and interior finishing industry.

#Research & Development

MELANGE starts with a co-creative design workshop at Aalto University to shape the visual identity of this new project transforming colouration in textiles

Over the next three years, MELANGE will lower the environmental impact of interior textile production by moving colour design to the beginning of the manufacturing process. This Horizon Europe project officially started on 1 August 2026, and will be publicly launched on 27 August 2026.

#Textile processing

YKK launches no. 3 size of QuickFree® click-TRAK® magnetic zipper globally

YKK Corporation (Headquarters: Chiyoda-ku, Tokyo; President: Koichi Matsushima; hereafter, YKK) has begun the global rollout of the No. 3 size of its QuickFree® click-TRAK® Magnetic zipper, expanding availability beyond China for the first time. While maintaining the same functionality and ease of operation, the No. 3 size is approximately 60% the size of the No. 5 size *1. This enables applications in lightweight garments, sportswear, hooded apparel, and other similar uses.

TOP