[pageLogInLogOut]

#Spinning

In the fast lane: With the CableCorder CC5 at the Tire Technology Expo 2023

Saurer CableCorder CC5 with state-of-the-art energy- saving technology © 2023 Saurer
Saurer Twisting Solutions is looking forward to welcoming customers and visitors at the 22nd Tire Technology Expo from 21-23 March 2023 at their booth 4004 in Hall 20 and to showcase the innovative CableCorder CC5. For the production of high-quality tire cord, the technology-leading CC5 scores with numerous innovations to keep Saurer customers as always in the fast lane.

Saurer's technology experts continuously support customers worldwide in optimising yarn production and yarn quality. Saurer has always been committed to the further development of the textile industry and integrates high-end plant engineering with modern information technology to provide sophisticated solutions today for the challenges of tomorrow. The Saurer CableCorder for the production of high-quality tire cord has always been a recognized leader in the tire industry.

The latest generation of the CableCorder convinces users with decisive competitive advantages:

• energy consumption reduced again

• smart spindle concept for energy saving

• modern quality control

• improved ergonomics

• flexible automation and digitisation solutions

• integration of the CableCorder into Saurer Senses


Energy, productivity, quality

Saurer has once again improved the patented energy-saving technology with new hardware and optimised software. The CableCorder CC5 is therefore more economical than ever. The optimised thread balloon diameter and reduced spindle gauge cut down space requirements and increase productivity. Online monitoring of the quality parameters ensures that our customers' high demands on the tire cord are guaranteed at all times.


User-friendly and intelligently automated

New machine components and an optimum yarn path enable a high operation comfort and process reliability. Intelligent automation solutions increase the efficiency of package transport thanks to the use of modern automated guided vehicle (AGV) technology. The loading of the machine, the removal of the completed take-up packages as well as the supply of the downstream creels are supported by automation technology.

In addition to the basic CC5 version, the CableCorder is also available in the CC5-TFO version for production of yarns in the two-for-one twisting process and as the CC5-3PLY version for production of symmetrical and asymmetrical 3-ply tire cord.




The CableCorder CC5-3PLY variant

The direct cabling machine for the production of symmetrical 3-ply tire cord as well as asymmetrical 2-ply and 3-ply hybrid twisted yarns has established itself very successfully in the market. Within a very short time after market launch, a large number of CC5-3PLY machines were delivered and commissioned in the world's tire cord markets. In addition, the CC5-3PLY serves replacement investments of ring twisting machines that are still used today for the production of 3-ply tire cord and hybrid yarns.

Intelligent technology for ergonomic relief and simplest operation © 2023 Saurer
Intelligent technology for ergonomic relief and simplest operation © 2023 Saurer


The Saurer exhibition team is looking forward to welcoming customers and visitors at the Tire Technology Expo 2023 and informing them personally about the benefits of our CableCorder CC5.

Variable gauge concept for more spindles with the same overall length. © 2023 Saurer
Variable gauge concept for more spindles with the same overall length. © 2023 Saurer



More News from Saurer AG

#ITM 2026

Saurer at ITM 2026: Answering markets needs for flexibility

The textile industry is facing unprecedented challenges: geopolitical tensions, natural disasters and pandemics and are changing market conditions overnight. Today, flexibility is no longer an option, but a survival strategy. At the ITM 2026 in Istanbul, Saurer will be demonstrating how modern machine technology delivers flexibility – from bale to yarn – in hall 7 at booth 709 A.

#Techtextil 2026

Saurer sets new standards at Techtextil 2026

When the international textile industry gathers at Techtextil in Frankfurt from April 21 to 24, Saurer is going to present a powerful solution for the growing demands in the field of technical yarns with the TechnoCorder TC2plus.

#Spinning

Saurer Technologies Twisting Solutions at ICFE 2026

Saurer Technologies Twisting Solutions, a global leader in textile machinery innovation, will be present at the International Carpet and Flooring Expo ICFE 2026. Join us January 6–9 at the Istanbul Expo Center, Türkiye, as industry leaders, manufacturers, and innovators gather to explore the latest breakthroughs in carpet and flooring technology. Let’s meet at the new established global Center of the Carpet Sector in hall 3, booth 300!

#ITMA Asia + CITME Singapore 2025

Saurer’s leading technology for the yarns of tomorrow at ITMA Asia 2025

Saurer, is looking forward to presenting the latest innovation highlights at the ITMA Asia + CITME 2025 in Singapore on booth C 301 in hall 3. The spinning, twisting, and automation solutions are underlining the commitment to driving efficiency, sustain-ability, and digitalisation in the textile industry, paving the way for the yarns of tomorrow.

More News on Spinning

#Recycled Fibers

Driving circularity with Uster Recycled Fiber Matrix

The textile industry’s commitment to circularity continues to accelerate, and mechanical recycling is viewed as a targeted approach to cutting textile waste and its environmental impact. At the forefront of this drive, Uster has developed the Recycled Fiber Matrix, a two-dimensional assessment of mechanically recycled fibers to guide optimum processing and end-uses.

#Spinning

Greater efficiency for tomorrow’s textile industry

From September 24 to 27, 2026, Barmag, together with BB Engineering (BBE), will present innovative solutions for the efficient and sustainable production of synthetic yarns at the Egy Stitch & Tex Expo in Cairo, Egypt. Under the motto “A New Era. Powered by Innovation.,” experts from Barmag and BBE will present technologies spanning the entire textile value chain — from melt to yarn — at the ATAG Ltd. booth (Hall 1, Booth C1).

#Spinning

Rieter prepares leadership transition in Components & Technology

Roger Albrecht, Head of the “Components & Technology” Division, has decided to pursue a new opportunity outside the Rieter Group. Roger has worked for the Group for 11 years and has been instrumental in maintaining Rieter’s position as a technology leader in the short-staple business.

#Spinning

Barmag presents metering pump solutions at ASE China

From September 15 to 17, 2026, Barmag’s Pumps Division will present its solutions for the precise delivery and metering of adhesives, sealants, and other high-viscosity media at ASE China at the Shanghai New International Expo Centre. The focus of the exhibition will be on high-precision gear metering pumps that help plant managers sustainably optimize material usage, process stability, and product quality. (Booth E4235).

Latest News

#Recycled Fibers

RE&UP’s Next-Gen Cotton fibers power Zalando private label t-shirt collection crafted from innovative recycled textiles

RE&UP Recycling Technologies’ Next-Gen Cotton powers a new collection from Zalando’s private labels, marking a step forward in bringing textile-to-textile recycled fibers into commercial fashion production. Launching on Zalando in August, the collection comprises five t-shirts across YOURTURN by Zalando and Even&Odd by Zalando, made from a circular-knit fabric blending 80% organic cotton with 20% RE&UP Next-Gen Cotton — textile-to-textile recycled fiber produced from textile waste. This is the first time RE&UP's recycled fibers feature in Zalando's private label assortment.

#Heimtextil 2027

Heimtextil Trends 27/28: ‘Home-Maxxing’ between performance and respite

Sleep better, recover faster, live more efficiently: the desire for optimisation has long since reached our homes. Under the title ‘Home-Maxxing – The Performance of Everyday Living’, Heimtextil Trends 27/28 show how our relationship with efficiency-driven thinking and technology is influencing the design of spaces and textiles. The more sleep, wellness, routines, materials and spaces are optimised, the stronger the desire for a home that does not demand even more of us.

#Digital Printing

Mimaki advances DTF productivity and stability with new TxF330-800

Mimaki Europe, a leading manufacturer of industrial inkjet printers and cutting plotters, announces the TxF330-800, its new direct-to-film (DTF) printer. Designed to support stable, high-quality garment decoration in demanding print environments, the system combines automated maintenance, expanded white ink capacity and advanced production capabilities to streamline workflow.

#Home Textiles

Intertextile Shanghai Home Textiles – Autumn Edition 2026 concludes as Asia’s premier hub for trend-led innovation

Intertextile Shanghai Home Textiles – Autumn Edition 2026 wrapped up on 20 August having brought the global home textiles community together in Shanghai. Over 900 exhibitors from 19 countries and regions attracted nearly 36,000 visitors from 113 represented markets to the National Exhibition and Convention Center (Shanghai). This edition further strengthened the fair’s status as a strategic gateway to the wider Asian buyer market, with strongly represented regions including Greater China, Southeast Asia, and increasingly Central Asia.

TOP