[pageLogInLogOut]
TRÜTZSCHLER SPINNING - THE NEW CARD

#Industry 4.0 / Digitalization

Textile ETP launches digital transformation strategy, calling for urgent collective action across the value chain

Textile ETP’s DigitX Innovation Hub published its strategic roadmap for the digital transformation of Europe's textile and apparel industry.


Presented on May, 26th, during the 20th Textile ETP Annual Conference in Amsterdam, and developed collaboratively by more than 100 industry experts from the DigitX Innovation Hub over six months, The Digital Transformation of the European Textile and Apparel Industry sets out a comprehensive plan to help European textile businesses become fit for the digital future, or risk losing them altogether.

The strategy identifies three converging pressures making digital transformation an existential necessity: the need for competitive agility in the face of ultra-fast global rivals; a wave of EU regulatory requirements including the Digital Product Passport and the Corporate Sustainability Due Diligence Directive; and the structural data demands of circular and service-driven business models.

“Combining the physical world of fibres and textile machines with the digital world of bits and bytes and soft factors like creativity, hands-on expertise or consumer psychology with rational and precise data-driven decision making in complex fast-paced supply chains are not easy tasks. But they must be undertaken, not only in the interest of greater competitiveness of the EU industry, but also to fully comply with a diverse set of upcoming EU regulations including the Digital Product Passport and to operate at a much higher level of sustainability and circularity in line with the vision of the EU strategy for sustainable and circular textiles2, said Marina Crnoja-Cosic, President, Textile ETP.

The strategy charts a path toward a digitally integrated, transparent, and responsive European textile value network by 2035, built on four technology layers (data infrastructure, digitised hardware, interoperable software, and human-AI collaboration) and four concrete innovation building blocks: Data Infrastructure, Digital Product Creation, Digital Production, and Digital Supply Chain.

The roadmap also presents ten recommendations to EU policy makers, with four identified as highest priority: explicitly linking sustainability regulation to digitalisation and competitiveness; mandating interoperability and open standards for publicly funded digital innovations; establishing and funding a European Textile Data Space with 500+ active participants by 2030; and funding the collaborative development of a harmonised Textile Data Ontology.

Mario Jorge Machado, President, EURATEX, stated: “The priority now should be implementation: making sure that digital solutions are accessible, affordable and relevant for companies on the ground. If Europe wants a competitive, circular and resilient textile and apparel ecosystem, digitalisation must become a practical enabler for industry, not an additional layer of complexity.”

Finally, the strategy identifies five cross-cutting actions that no single stakeholder can accomplish alone: co-developing a European Textile Data Ontology; building shared digital fabric libraries; establishing end-to-end Digital Product Passport data flows; creating feedback loops between recyclers and designers; and developing a cross-border digital skills and talent pipeline.

Concrete implementation strategies for the key recommendations will be developed in the second half of 2026, following the strategy’s public presentation at the 20th Textile ETP Annual Conference.

The Digital Transformation of the European Textile and Apparel Industry strategy is available on:

http://www.textile-platform.eu/innovation-hub-digitx/#strategy




More News from Textile ETP

#Europe

Textile ETP launches bioeconomy strategy for Europe’s textile industry

On 22 September 2026, Textile ETP's Circular & Biobased Textiles Innovation Hub published its strategy for the biobased and circular transformation of Europe's textile and apparel industry.

#Research & Development

MELANGE starts with a co-creative design workshop at Aalto University to shape the visual identity of this new project transforming colouration in textiles

Over the next three years, MELANGE will lower the environmental impact of interior textile production by moving colour design to the beginning of the manufacturing process. This Horizon Europe project officially started on 1 August 2026, and will be publicly launched on 27 August 2026.

#Recycling / Circular Economy

From local actions to industrial innovations: SOLSTICE shares mid-project results

Since its launch in May 2024, the SOLSTICE project is accelerating the transition from linear models to circular regional ecosystems in the textile industry, focusing on four key territories: Grenoble-Alpes Métropole (France), Berlin (Germany), Prato (Italy), and Catalonia (Spain). By mid-project, SOLSTICE has already revealed both regional disparities and promising solutions to strengthen textile repair, reuse, and recycling infrastructure.

#Recycling / Circular Economy

Textile ETP wraps up T-REX's Policy Roundtable

The T-REX project’s policy roundtable in Brussels on November 12 was a pivotal gathering of experts and leaders committed to advancing Europe’s sustainability efforts. Concluding the event, Secretary General Lutz Walter reflected on the discussions and emphasized the core themes that resonated throughout the day.

More News on Industry 4.0 / Digitalization

#Industry 4.0 / Digitalization

Jeanologia and BCome connect factory data with Life Cycle Assessment and Digital Product Passports

A new white paper by EIM by Jeanologia and BCome demonstrates how primary environmental data from denim finishing processes can be integrated into a garment's Life Cycle Assessment (LCA) and prepared for use in a Digital Product Passport (DPP). A comparative case study highlights significant improvements at the production stage while also showing how these translate into the environmental performance of the finished garment.

#Industry 4.0 / Digitalization

White House reduces production planning time by up to 80% with Coats Digital’s FastReactPlan

Indian garment manufacturer White House has reduced its production planning cycle by 60–80% following the implementation of Coats Digital’s FastReactPlan software. The integrated planning solution provides greater visibility across production, capacity and material requirements while supporting faster decision-making and improved delivery performance.

#Industry 4.0 / Digitalization

Jeanologia presents expanded EIM platform and COMMON GROUND collection at Kingpins Amsterdam

Jeanologia is presenting two approaches to textile product development at Kingpins Amsterdam on October 14–15: measuring the environmental impact of textile production and exploring new creative possibilities through garment finishing technologies.

#Software

UNIFEQ Europe adopts Coats Digital’s GSDCost and AI-powered GSDQuest to support rapid growth

Coats Digital is pleased to announce that rapidly growing Polish defence and uniform manufacturer UNIFEQ Europe Sp. z o.o. has invested in its award-winning GSDCost solution together with its AI-powered GSDQuest platform to establish a consistent approach to garment costing, improve sewing-floor productivity and accelerate labour costing for tenders and new products.

Latest News

#India ITME 2026

Stäubli to introduce new S3292 dobby for high-speed weaving at ITME India 2026

Stäubli will introduce its new S3292 dobby at ITME India 2026, taking place from December 4 to 9 at the India Expo Centre & Mart in Greater Noida, Uttar Pradesh. Designed for high-speed air-jet weaving, the new machine will be among the highlights of the company's presentation, which also includes warp preparation systems, cam motions, Jacquard technologies and digital services.

#Research & Development

DITF develops bio-based binding fibers for wood-fiber insulation materials

As part of the CelluWoodFlex project, the German Institutes of Textile- and Fiber-Research in Denkendorf (DITF) are developing bio-based cellulose ester fibers as alternative binding fibers for flexible wood fiber insulation materials. In addition to the spinning process and the production of suitable staple fibers, the institute is also investigating how wood and cellulose fibers can be separated and recycled at the end of their useful life.

#Recycled Fibers

Reju expands textile-to-textile recycling network with six international fabric manufacturers

Reju, a textile-to-textile regeneration company, is expanding its industrial network through collaborations with six fabric manufacturers in Europe and the Americas. The initiative aims to accelerate the integration of regenerated polyester into textile manufacturing and support the development of finished fabrics for commercial applications.

#Nonwovens

Magnera highlights HighPleat™ filtration media technology at FiltXPO 2026

At FiltXPO 2026, held on October 28–29 at the Minneapolis Convention Center in Minneapolis, Minnesota, Magnera highlighted advances in air filtration media architecture, with a particular focus on its HighPleat™ platform for MERV 8–10 applications. The technology combines a lofted fiber structure with optimized pore architecture to address the challenge of balancing filtration efficiency, airflow resistance and contaminant-holding capacity.

TOP