[pageLogInLogOut]

#ITMA Asia + CITME Singapore 2025

T-CAN – Revolutionizing can transport

(c) 2025 Trützschler
In virtually all spinning mills, transporting sliver cans is still done manually. Rising labor costs, lack of operators and increasing quality requirements make this a growing challenge. With T-CAN, Trützschler introduces a practical solution: a fully automated can transport system that will be presented live at ITMA ASIA 2025 in Singapore.

Efficient and reliable automation

T-CAN automates the transport of sliver cans between cards, breaker draw frames, and finisher draw  frames – quickly and precisely. The system combines sliver cans with automated guided vehicles (AGVs)  and a smart software interface that tracks every movement and places each can exactly where it belongs.

What T-CAN delivers

T-CAN minimizes manual handling and transport, supports continuous production (also at lunch breaks  and night shifts), and ensures consistent quality through reliable material allocation. Therefore, mills benefit  from lower labor costs, higher machine efficiency, and improved sliver quality – all with a system that adapts  to your mill, not the other way around.

“With T-CAN, we’re responding to our customers’ needs for intelligent automation. Our goal was to create a solution that not only reduces operational costs but also enhances quality and consistency in sliver  handling. It’s a leap forward in making spinning mills smarter.” – Alexander Stampfer, CSO Trützschler Group.

Simple to use

Despite its advanced technology, T-CAN is easy to operate. The intuitive software interface requires only  a few minutes of training and no prior expertise in robotics.

Scalable and future-ready

T-CAN is ideal for medium to large spinning mills with high output and automation goals. But thanks to its  modular design, it’s also a smart choice for smaller mills looking to future-proof their processes. T-CAN is built to easily scale with your ambitions.

Proven performance

One of the first adopters of T-CAN was JINGYI, a spinning mill in Sheyang, China. After a successful pilot project, JINGYI placed an order to automate can transport for over 120 TC 26i cards and 240 draw frames. T-CAN has proven itself as a robust, reliable, and operator-friendly solution. “We were impressed by the performance and reliability of T-CAN during the pilot phase. It has significantly improved our efficiency and reduced our staffing needs. That’s why we decided to implement it across our entire carding and draw frame section.” – Mr. Peng Fujian, Deputy General Manager JINGYI Group.

Experience it live

Visit the Trützschler booth at ITMA ASIA 2025 in Singapore to see T-CAN in action, talk to our experts and discover how it can transform your production.


More News from Truetzschler GmbH & Co. KG

#India ITME 2026

Trützschler brings intelligent fiber processing and automation to India ITME 2026

From December 4 to 9, 2026, the Trützschler Group will present its latest innovations in spinning, card clothing and nonwovens at India ITME in Greater Noida, India. At Hall 11, Booth B15, visitors can discover solutions designed to increase productivity, reduce operating costs and ensure consistently high product quality. Key highlights include the intelligent card TC 26i, the 12-head comber TCO 21XL, innovative card clothing solutions for improved fiber utilization and quality, as well as advanced nonwovens technologies for hygiene, wipes and technical applications.

#Spinning

Trützschler expands technical service capabilities for spinning mills in Pakistan

Faster support, shorter downtime and advanced repair capabilities: customers across Pakistan can now benefit from the Trützschler Service Station at its new location in Lahore. By combining Trützschler service expertise with state-of-the-art diagnostic equipment, the new facility helps spinning mills resolve technical issues more quickly and maintain reliable production.

#ITMA Asia + CITME 2026

Trützschler to showcase innovations in spinning preparation and nonwovens at ITMA Asia 2026

From November 20 to 24, 2026, the Trützschler Group will present its latest fiber processing technologies at ITMA Asia in Shanghai, China. At Hall 5.1, Booth D20, the company will showcase solutions designed to increase productivity, simplify operations and improve efficiency across spinning preparation and nonwoven production. Key highlights include the automated can transport system T-CAN, the next-generation card TC 30, innovative card clothing solutions such as STEELTOP and SUPERFLOW, as well as advanced nonwoven technologies for hygiene, wipes and filtration applications.

#Spinning

Closer to customers: Trützschler Card Clothing expands service network in Peru, Colombia and Ecuador

Faster support, shorter lead times and local technical expertise: customers in Peru, Colombia, and Ecuador now have direct access to Trützschler Card Clothing's (TCC) comprehensive card clothing services. To further enhance customer support and ensure rapid on-site assistance, TCC has expanded its regional service network across all three countries.

More News on ITMA Asia + CITME Singapore 2025

#ITMA Asia + CITME Singapore 2025

India becomes growth engine for the warp knitting industry

ITMA ASIA 2025 exceeded all expectations for KARL MAYER – above all thanks to the strong interest from India: around 30% of the qualified discussions were held with partners from this traditional textile country. The response underlines the growing importance of the Indian market, which could become the second largest sales region for KARL MAYER after China. The warp knitting industry in particular is developing dynamically.

#India ITME 2026

India ITME Society pushes trade & technology alliances in Singapore

India ITME Society hosted India Networking Program - Fabricating the Future of Textile Industry- From Heritage to High-Tech” on 29th October 2025 at Singapore an exclusive gathering of Ministry of Textile Officials, Embassy Officials, Entrepreneurs, Technocrats, Industry Organizations and Media Personnel's designed to foster collaboration, exchange ideas and explore opportunities in the Indian Textile & Textile Engineering Sector.

#ITMA Asia + CITME Singapore 2025

Innovation and customer proximity – KARL MAYER’s clear focus makes an impression

ITMA ASIA in Singapore was a resounding success for KARL MAYER, exceeding all expectations. The company welcomed visitors from 39 countries and held around 570 expert discussions. Most guests came from India, followed by China, Indonesia and Pakistan. The exchange with them was both well-founded and targeted. Conversation topics ranged from investment projects and new technologies to opportunities for cooperation and business expansion.

#ITMA Asia + CITME Singapore 2025

Singapore edition of ITMA ASIA + CITME makes successful presentation

The region’s leading textile and garment technology exhibition, ITMA ASIA made a successful return to Singapore after two presentations in 2001 and 2005.

Latest News

#ITMA Asia + CITME 2026

VDMA: German textile machinery manufacturers see signs of recovery as China remains a key market

Strong German participation at ITMA ASIA + CITME 2026 underscores China's importance for the textile machinery industry, while business surveys point to improving prospects for 2027.

#ITMA Asia + CITME 2026

ITMA ASIA + CITME 2026 opens in Shanghai, showcasing intelligent and sustainable textile manufacturing

ITMA ASIA + CITME 2026 opened today at the National Exhibition and Convention Center in Shanghai, bringing the global textile machinery industry together from 20 to 24 November.

#Associations

Christoph René Holler to succeed Uwe Mazura as managing director of textil+mode

Christoph René Holler will take over as managing director of textil+mode, the German textile and fashion industry confederation, on 1 January 2027. He succeeds Uwe Mazura, who has led the association for 13 years and will remain in charge of collective bargaining policy through the next round of negotiations before retiring.

#Heimtextil 2027

Heimtextil and The Florentin showcase the role of textiles in hotel design

Heimtextil has partnered with Frankfurt hotel The Florentin by Althoff Collection for its new Interior.Architecture.Hospitality campaign. The collaboration will give architects, interior designers and other contract-sector professionals a closer look at how textiles were used in the hotel. The two studios behind the project will discuss their work at Heimtextil on 14 January 2027 in Hall 4.1.

TOP