[pageLogInLogOut]

#Dyeing, Drying, Finishing

Key role for Kipas in the EU’s multi-million New Cotton Project

Kipas Vice Chairman of the Board Ahmet Öksüz (centre) receives the certificate of excellence for machine utilisation from Monforts Regional Representative Thomas Päffgen and Ahmet Ciliç CEO of Neotek, the Monforts service partner in Turkey © 2020 Monforts
Monforts customer Kipas has been selected as the sole denim manufacturing partner in the €6.7 million European Union-funded New Cotton Project, involving the brands adidas and H&M, working in a consortium with suppliers, innovators and research institutes.

Kipas, based in Kahramanmaras, Turkey, is currently installing its third Monforts Montex stenter along with a third Monfortex compressive shrinkage system in a combined configuration dedicated to denim production.

This follows the successful installation and commissioning of the second Montex and Monfortex lines at the Kahramanmaras plant in 2018, which Kipas Vice Chairman of the Board Ahmet Öksüz said had immediately exceeded expectations.

“We performed a very thorough technical investigation based on the latest Industry 4.0 analysis before the purchase, to determine what we needed, and the Monforts technology met all our requirements,” he said, in an interview with Textilegence magazine. “The Monfortex is equipped with a variety of features not found on classical shrinkage machines and the production can be monitored from beginning to end. It also exceeded our expectations in energy cost savings.”

Kipas subsequently received a special certificate from Monforts in recognition of its exceptional utilisation of the technology to its full potential.

Infinited Fiber Company’s textile fibre regeneration technology – from shredded textiles to cellulose carbamate fibre.Image: Infinited Fiber Company. © 2020 Monforts
Infinited Fiber Company’s textile fibre regeneration technology – from shredded textiles to cellulose carbamate fibre.Image: Infinited Fiber Company. © 2020 Monforts


The latest Montex stenter now being installed at Kipas is a 12-chamber unit with a working width of 2 metres featuring all of the latest automation features. The Monfortex unit, also with a working width of 2 metres, is in a ‘double rubber’ configuration, comprising two compressive shrinkage units and two felt calenders in line. This allows the heat setting of elastane fibres and the residual shrinkage of the denim to be carried out simultaneously, for a significant increase in production speeds.

“Around 90-95% of denim fabric production now contains elastane fibres and the Monforts system has allowed us to simultaneously increase our production and quality in this respect,” Mr Öksüz said.

Regenerated cotton

For the next three years within the New Cotton Project, Kipas will manufacture denim fabrics based on the cellulose-based fibres of Infinited Fiber Company of Finland, made from post-consumer textile waste that has been collected, sorted and regenerated.


The patented technology of Infinited, which is leading the consortium of 12 companies, turns cellulose-rich textile waste into fibres that look and feel like cotton.

“We are very excited and proud to lead this project which is breaking new ground when it comes to making circularity in the textile industry a reality,” said Infinited co-founder and CEO Petri Alava. “The enthusiasm and commitment with which the entire consortium has come together to work towards a cleaner, more sustainable future for fashion is truly inspiring.” 

The New Cotton Project logo.
The New Cotton Project logo.


Take-back programmes

Adidas and H&M will establish take-back programmes to collect the clothing that is produced, to determine the next phase in their lifecycle. Clothing that can no longer be worn will be returned to Infinited, for regeneration into new fibres, further contributing to a circular economy in which textiles never go to waste, but instead are reused, recycled or turned into new garments.

The aim is to prove that circular, sustainable fashion can be achieved today, and to act as an inspiration and stepping stone to further, even bigger circular initiatives by the industry going forward.

The EU has identified the high potential for circularity within the textile industry, while simultaneously highlighting the urgent need for the development of technologies to produce and design sustainable and circular bio-based materials. Making sustainable products commonplace, reducing waste and leading global efforts on circularity are outlined in the European Commission’s Circular Economy Action Plan.

Fashion brands produce nearly twice as many clothes today as they did 20 years ago and demand is expected to continue growing. At the same time, the equivalent of one garbage truck of textiles is landfilled or burned every second. Most of the textile industry’s environmental problems relate to the raw materials used by the industry – cotton, fossil-based fibres such as polyester, and viscose as the most common man-made cellulosic fibre, are all associated with serious environmental concerns.



More News from A. Monforts Textilmaschinen GmbH & Co. KG

#ITMA Asia + CITME Singapore 2025

VDMA companies outline major benefits in finishing – and now dyeing too

Monforts and its partners Archroma and BW Converting are setting new standards in the resource efficient and cost-effective finishing of fabrics. During a recent webinar organised by Germany’s VDMA textile machinery association, specialists from the three companies provided details of the range of new energy-saving options that is now available to mills.

#Dyeing, Drying, Finishing

Fourth Monforts Montex for Europe’s quality linings leader

Through a planned programme of continuous expansion, including ongoing projects aimed at resource efficiency and environmental excellence, Spain’s Textil A. Ortiz has reinforced its position as Europe’s leading supplier of premium quality lining fabrics.

#ITMA Asia + CITME Singapore 2025

Responding to market demand with the new Monforts VertiDry

At the forthcoming ITMA Asia + CITME textile machinery exhibition in Singapore this October, Monforts will introduce the new VertiDry, a vertical dryer for use in combination with coating machines, padders or Monforts EcoApplicator units in the special finishing of technical textiles.

#Dyeing, Drying, Finishing

Driving innovation in sustainable textile finishing and beyond

Ahead of this year’s ITMA Asia + CITME exhibition in Singapore from October 28-31, industry leading companies Archroma, BW Converting and Monforts will take part in a webtalk with German association VDMA on September 18th.

More News on Dyeing, Drying, Finishing

#ITMA Asia + CITME Singapore 2025

BRÜCKNER will be demonstrating what modern textile finishing looks like today at ITMA ASIA

Brückner Textile Technologies is presenting German engineering expertise and energy-efficient line concepts at this year's ITMA ASIA in Singapore. The family-run company has been a leader in customized technologies and solutions for textile equipment for over 75 years. The focus is on energy efficiency, automation, and maximum productivity.

#Dyeing, Drying, Finishing

BW Converting’s Baldwin brand validated by Fashion for Good and Apparel Impact Institute

BW Converting announces that its Baldwin TexCoat® G4 precision spray finishing system has been validated through collaboration with Fashion for Good and Apparel Impact Institute (Aii). Following extensive trials and analysis, the technology is now recognized within Aii’s Climate Solutions Portfolio Registry as a proven solution for lowering carbon emissions and resource consumption across the global textile supply chain.

#ITMA Asia + CITME Singapore 2025

Benninger’s must-see dyeing and finishing solutions at ITMA Asia + CITME 2025

Benninger, a complete system supplier with leading technologies for continuous wet processing and discontinuous dyeing, as well as technical textiles, reinforces its commitment to sustainable textile production with resource-efficient machinery that increases both top and bottom line performance. At ITMA Asia + CITME 2025, Benninger will showcase a brand-new singeing machine for knitwear alongside proven solutions from its extensive portfolio.

Latest News

#Spinning

Rieter reports stable order backlog and strategic progress – outlook for 2025 adjusted

In its Investor Update 2025, Rieter announced an order intake of CHF 203.9 million in the third quarter and CHF 559.3 million after nine months, reflecting a continued cautious investment climate in the textile machinery sector. Sales totaled CHF 121.5 million in the third quarter and CHF 457.7 million for the first nine months of the year, while the order backlog stood at around CHF 590 million as of September 30, 2025.

#Associations

Winners of the ITMF International Collaboration Award 2025

The winners of the ITMF International Collaboration Awards 2025 will present their project at the upcoming ITMF & IAF Conference 2025 which will be held from 24 - 25 October in Yogyakarta, Indonesia and will be co-hosted by Indonesia Textile Industry Association (API).

#Associations

Winners of the ITMF Start-up Award 2025

The winners of the ITMF Start-up Awards 2025 will present their business models at the upcoming ITMF & IAF Conference 2025 which will be held from 24 - 25 October in Yogyakarta, Indonesia and will be co-hosted by the Indonesia Textile Industry Association (API).

#Associations

Winners of the ITMF Sustainability & Innovation Award 2025

The winners of the ITMF Sustainability & Innovation Awards 2025 will present their project at the upcoming ITMF & IAF Conference 2025 which will be held from 24 - 25 October in Yogyakarta, Indonesia and will be co-hosted by Indonesia Textile Industry Association (API).

TOP