[pageLogInLogOut]

#Dyeing, Drying, Finishing

Baldwin installs six precision spray systems in 60 days for textile manufacturers

Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.

Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity 

For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil repellents, flame retardants and more. These systems enable fabric producers to significantly reduce chemical and water consumption, while speeding up production times and eliminating production steps, including drying and bath changeovers when switching fabric colors.

“Our customers are major manufacturers in fabric dying, finishing and remoistening, and we want to provide outstanding service and support—even in times like this,” said Rick Stanford, Business Development Leader at Baldwin and the commercial leader of the US installations. “Not only does our precision spray technology enhance productivity in their process, but there is also zero waste, which goes hand-in-hand with the increased sustainability focus in the textile industry.”

In North Carolina, two new TexCoat G4 precision spray systems are now in production with major international vertical manufacturers of outdoor living, performance fabrics and automotive fabrics. In Georgia, a major vertical manufacturer of workwear and protective fabrics installed a sanfor precision spray system, which has helped the customer obtain deeper penetration of moisture into fabrics treated with durable water repellents. In Turkey, three new TexCoat G4 systems were installed in Çorlu, northwest of Istanbul, for a large producer of knit fabrics, such as T-shirts.

“In Turkey, the manufacturer purchased and installed one TexCoat G4 system before COVID-19, and the customer was so pleased with the results that, during the pandemic, three more were purchased,” said Simone Morellini, Sales Manager-EMEAR at Baldwin and the commercial leader of the Turkish installations. “The systems were manufactured and installed during the lockdown, and now, all four systems are up and running, and being used heavily on a daily basis.”


“With the success we have seen, we plan to apply the same strategies for upcoming installations, including the next one in Honduras: strong local management and customer coordination, combined with effective remote support during the installation,” said Stanford.

Baldwin’s TexCoat G4 precision spray system produces ideal results in fabric finishing, because the exact required amount of water and chemistry is always applied. © 2020 Baldwin
Baldwin’s TexCoat G4 precision spray system produces ideal results in fabric finishing, because the exact required amount of water and chemistry is always applied. © 2020 Baldwin


More News from Baldwin Technology Company Inc.

#IGATEX 2026

BW Converting, Archroma and Monforts to highlight precision spray finishing at IGATEX Pakistan 2026

BW Converting, Archroma and Monforts will participate in IGATEX Pakistan 2026, held Oct. 15–18 at the Expo Centre Lahore, at Al-Ameen Trading Corporation’s stand F-2-09 in Hall 2. Together, the companies will highlight precision spray-finishing technology, textile chemistry expertise and application-development support to help Pakistan’s textile manufacturers evaluate opportunities to improve finishing performance and production efficiency.

#Dyeing, Drying, Finishing

BW Converting to spotlight Baldwin TexCoat® G4 at Guatemala’s 33rd Apparel Sourcing Show

BW Converting will introduce textile manufacturers to the capabilities and production benefits of the company’s Baldwin TexCoat® G4 precision spray finishing system at the 33rd Apparel Sourcing Show, taking place Aug. 18-20 at the Tikal Futura Convention Center in Guatemala City. BW Converting will participate through its local agent, Maprimaq, at booths 25 and 26.

#Dyeing, Drying, Finishing

BW Converting to promote sustainable finishing solutions with A.T.E. at Techtextil India 2025

Under its Baldwin brand, BW Converting will showcase its sustainable textile finishing innovations in collaboration with its India representative A.T.E. Enterprises Pvt. Ltd. at Techtextil India 2025, taking place November 19 - 21 at the Bombay Exhibition Centre in Mumbai.

#Dyeing, Drying, Finishing

BW Converting’s Baldwin brand validated by Fashion for Good and Apparel Impact Institute

BW Converting announces that its Baldwin TexCoat® G4 precision spray finishing system has been validated through collaboration with Fashion for Good and Apparel Impact Institute (Aii). Following extensive trials and analysis, the technology is now recognized within Aii’s Climate Solutions Portfolio Registry as a proven solution for lowering carbon emissions and resource consumption across the global textile supply chain.

More News on Dyeing, Drying, Finishing

#Dyeing, Drying, Finishing

Brazilian market leader Cedro Têxtil focuses on greater efficiency, sustainability, and product quality with Brückner

After more than 150 years of company history, Cedro Têxtil is once again embracing the challenges of a changing industry. Widely recognized as the largest manufacturer of workwear fabrics in Latin America, the Brazilian textile company continues to invest in the modernization of its production facilities. A key milestone in this process was the decision to install a state-of-the-art Brückner stenter frame just over a year ago.

#IGATEX 2026

Impressive savings with Monforts’ stand-alone air/air heat exchanger

Having maintained an 80% share of Pakistan’s new stenter market with MONTEX machines for over 20 years and additionally now installed over 40 THERMEX dyeing ranges in the country, Monforts will highlight the benefits of its latest Universal Energy Tower at IGATEX 2026.

#Dyeing, Drying, Finishing

Turning new ideas into industrial reality at the Monforts ATC

The Monforts Advanced Technology Centre (ATC), initially opened in 2103 and subsequently expanded, continues to be an invaluable resource to customers from around the world in achieving new standards in fabric finishing.

#Textile chemistry

Archroma and Lameirinho partner in pioneering deployment of InOneGO single-step dyeing

Archroma, a global leader in specialty chemicals, and Lameirinho, a leading home textiles manufacturer based in Portugal, are collaborating to bring InOneGO by Archroma, a new single-step dyeing process, into commercial production. Lameirinho’s first InOneGo bedlinens collection is now available worldwide.

Latest News

#ITMA Asia + CITME 2026

Mayer & Cie. Global gears up tor ITMA Asia 2026

Mayer & Cie. Global will focus on mattress fabric production at ITMA Asia, taking place in Shanghai from 20 to 24 November 2026. The company will showcase one of its flagship models for this application: the OVJA 2.4 EM. Joining the mattress fabric specialist will be an OV 3.2 QCe, presented at ITMA Asia in a configuration for knitting double-face fabrics in E40. This gives the OV 3.2 QCe a combination of capabilities rarely found in the market. The German textile machinery manufacturer will also introduce its new portfolio strategy and share updates from its development team at its Albstadt headquarters.

#Associations

EU and Mercosur textile industries launch new Textile and Apparel Dialogue

EURATEX, ABIT and FITA have launched the EU–Mercosur Textile and Apparel Dialogue (TAD), a new industry platform aimed at strengthening cooperation between the European and Mercosur textile and apparel sectors.

#Spinning

FET highlights advances in fibre spinning technology at Dornbirn Global Fiber Congress

Fibre Extrusion Technology Limited (FET) presented its latest developments in fibre spinning technology at the Dornbirn Global Fiber Congress in Austria in September 2026. In a presentation entitled “Spinning a good yarn”, Dr Jonny Hunter examined recent technological developments and challenges facing the fibre industry, highlighting the company's expanding range of specialised fibre extrusion and spinning systems.

#Textiles & Apparel / Garment

Vietnam’s market evolution creates new sourcing opportunities at VIATT 2027

As Vietnam’s textile industry continues to upgrade and scale, new opportunities are emerging for suppliers of advanced raw materials, design-led fabrics, production technologies, and sustainability solutions. The Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will return 24 – 26 February 2027, presenting a cross-sector platform – spanning apparel, home and technical categories – for overseas companies to connect with manufacturers, brands, sourcing offices, retailers, and industry buyers from Vietnam, ASEAN, and beyond.

TOP