[pageLogInLogOut]

#Composites

Results of the LIFE Recysite Project

The Recysite project demonstrated the possibility to produce "green" composites based on natural fibres from agro-wastes, bio-based resin (ELO-epoxidized linseed oil] and humins (a side stream of bio-polymers production]. Additionally, it is possible to recycle these composites up to 10 times.

Layman's report

Several demonstrators were manufactured and validated for the transportation and construction sectors. Because of the required high mechanical requirements and fire protection legislation in some end applications, the amount of bio-based content varied from 7,5% for railway wagon floors to 90% for the modular panels and ventilated facades in the construction sector.

The project provides solutions for the composite industry where bio-based and renewable materials can be introduced in varying percentages according to sector requirements, without compromising the quality and against lower costs.

See the full report:

https://www.centexbel.be/sites/default/files/inline-files/Recysite-results_sept2019.pdf

More News from TEXDATA International

#Recycling / Circular Economy

textile.4U publishes special edition “Top 100 Textile Recycling Companies 2025”

With a comprehensive 176-page special edition, textile.4U is dedicating its latest issue entirely to one of the most dynamic and influential topics in today’s textile industry: textile recycling. The new issue, published exclusively in high-quality print, presents the Top 100 textile recycling companies researched and selected by TexData – organizations that already play a key role in the transition to circular textiles or are expected to have a significant impact in the near future.

#Recycling / Circular Economy

Responsible Textile Recovery Act of 2024 signed by Governor

Senator Josh Newman (D-Fullerton) is proud to announce that Senate Bill 707 (SB 707), the Responsible Textile Recovery Act of 2024, has been signed into law by the Governor of California, Gavin Newsom. This groundbreaking legislation establishes the country’s first Extended Producer Responsibility (EPR) textile recycling program, marking a significant step forward in the state’s efforts to combat waste and promote sustainability.

#Textiles & Apparel / Garment

Modtissimo promotes sustainability with 28 coordinates in the Green Circle

Modtissimo is proving more and more to be a textile and clothing show that delivers the latest innovations in the area of sustainability, with the iTechStyle Green Circle being the main showcase for companies' creations. In this 60+4 edition, taking place on 12 and 13 September, 28 coordinates will be exhibited in a section organised by CITEVE and curated by Paulo Gomes.

#Europe

The EU and Egypt team up to mobilise private sector investments at Investment Conference and sign a Memorandum of Understanding underpinning €1 billion in macro-financial assistance for Egypt

At the EU-Egypt Investment Conference, co-organised by the EU and the Government of Egypt on 29-30 June, the EU and Egypt are teaming up to intensify private sector investments in Egypt. They are also signing a Memorandum of Understanding (MoU) for the disbursement to Egypt of up to €1 billion in Macro-Financial Assistance.

More News on Composites

#Associations

Driving innovation in technical textiles, digitalisation and testing

Members of the British Textile Machinery Association (BTMA) can look back on 2025 as a year marked by notable technological advances and continued progress in global trade, despite an uncertain and volatile market.

#Composites

MEL Composites delivers advanced hull infusion for Técnico Solar Boat’s hydrogen-powered São Gabriel 01

MEL Composites has reinforced its partnership with Técnico Solar Boat through the successful hull infusion of the São Gabriel 01, an 8m long, 2.4m wide, hydrogen-powered hydrofoiling vessel. Designed to compete at the Monaco Energy Boat Challenge in July 2026, the São Gabriel 01 is the team’s most technically demanding project to date and showcases the future of sustainable marine engineering by combining advanced composite manufacturing with clean energy systems.

#Composites

Sicomin appoints CS Kompozyty as exclusive Distributor for Poland

Sicomin is pleased to announce the appointment of CS Kompozyty as its exclusive distributor for Poland. The partnership will provide Polish composite manufacturers with comprehensive access to Sicomin's broad range of performance epoxy resins, green epoxies, hardeners, and adhesive solutions, supported by local technical expertise and rapid delivery capabilities.

#Composites

JEC World 2026 reveals the list of finalists for the Innovation Awards

Each year, the JEC Composites Innovation Awards recognize collaborative, innovative, and ambitious projects that illustrate the potential of composite materials. Created in 1998, this benchmark program aims to identify, promote, and reward the most innovative composite solutions worldwide. In 28 years, the JEC Composites Innovation Awards have attracted more than 2,200 participating companies from around the world. A total of 269 companies and 811 associated partners have been recognized for the excellence of their innovations.

Latest News

#Digital Printing

Epson launches SureColor G9000: high-production Direct-To-Film printer delivering greater productivity and reliability

Epson today announces the launch of the SureColor G9000, a new high-production Direct-To-Film (DTFilm) printer designed to meet growing global demand for flexible and efficient textile transfer printing. Expanding Epson’s DTFilm line-up alongside the SC-G6000, the SC-G9000 introduces enhanced speed, reliability and ease of maintenance for commercial garment decorators and textile producers.

#Nonwoven machines

Three ANDRITZ spunlace lines start operating at Alar Silk Road New Materials in China

Alar Silk Road New Materials and ANDRITZ have successfully commissioned three spunlace lines in crosslapped configuration at Alar’s facility in Aral City, Xinjiang, China.

#Raw Materials

Better Cotton Initiative opens enrollment in the US with promising opportunities for producers

Producer enrollment for the US Program of the Better Cotton Initiative (BCI) is open until May 15 for the 2026-2027 season. With over 2,600 members spanning the cotton supply chain and more than 11,000 users of its Better Cotton Platform (BCP) as of 2025, BCI’s standard is implemented in 15 countries and covers one fifth of global cotton production.

#Knitting & Hosiery

SHIMA SEIKI to exhibit at GMMSA Expo India

Leading Japanese computerized flat knitting technologist SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Indian sales representative Universal MEP Projects & Engineering Services, Ltd., will participate in the upcoming Garments Machinery Manufacturers & Suppliers Association (GMMSA) Expo India 2026 exhibition to be held in Ludhiana, India next month. Through its lineup at GMMSA, SHIMA SEIKI aims to further strengthen its presence within the Indian market with an exhibit that caters to diverse needs, consisting of seam-free WHOLEGARMENT® knitting technology as well as a brand-new shaping machine with high productivity and excellent cost performance.

TOP