[pageLogInLogOut]

#ITMA Asia + CITME 2020

Picanol to exhibit at Itma Asia + CITME

Following the highly successful ITMA Europe in 2019, ITMA ASIA + CITME will be the textile machinery industry’s first major exhibition in two years. Understandably, everyone at Picanol is really looking forward to this event, especially given that the close cooperation between CTMA and Cematex has transformed ITMA ASIA + CITME into the most important biennial meeting point not only for the Asian but also for the global textile industry. 

Two brand new Picanol rapier machines will be premiered!

“Everyone at Picanol is eager to help our customers by providing the best technologies available on the market for airjet and rapier machines, as well as an outstanding local service and support team. The four development principles of Picanol - Smart Performance, Sustainability Inside, Driven by Data, and Intuitive Control - guide us in all our ventures. Inspired by these four principles, our R&D team has been developing some really exciting innovations that will be displayed at ITMA ASIA + CITME. These include two airjet weaving machines, four rapier weaving machines for flat fabrics, as well as one rapier machine for weaving terry towel. Furthermore, there will be an additional rapier machine in jacquard execution at the Bonas booth,” comments Johan Verstraete, Vice President Weaving Machines.

In addition to displaying the many innovations made to its range of both airjet and rapier machines, Picanol will also be premiering two new rapier machines: the brand new GTMax-i 3.0S will be shown in a 4 color dobby execution, weaving a denim style, whereas the new GTMax-S on display will be an 8 color dobby machine in 380 cm reed width weaving a silk fabric.

Picanol will also be demonstrating an OptiMax-i gripper machine in free flight execution of 540 cm width at the exhibition. This represents a significant innovation breakthrough for specific technical segments.

1. GTMax-i-3.0S 4-R-230 Denim

The new GTMax-i 3.0S sets the benchmark for competitive and qualitative weaving – and it’s also available in 240 and 250 cm reed width for ultimate stretch fabrics.

Warp:

• Co Ne 16/1

• Density 35.7 ends/cm

• Drawing in width 223 cm

Weft:

• PES/EL 150/40 den + PES 300 den

• Density 35.4 picks/cm

Features:

• BlueBox electronic platform

• SUMO Drive concept

• Dobby S2678B with Stäubli undermotion

• DRC2 Harness Frame connection

• Guided Gripper (GOH)

• Electronic Selvedge System (ELSY)

• Oil cooler

 

2. GTMax-S-8-R-380 Silk

The new GTMax-S with its dedicated silk execution offers you the perfect solution for weaving top-quality fabrics.

Warp:

• Silk 1/40/44 den

• Density 120 ends/cm

• Drawing in width 375 cm

Weft:

• Silk 2/20/22 den

• Density 49 picks/cm

Features:

• BlueBox electronic platform

• SUMO Drive concept

• Dobby S2658B with Stäubli undermotion

• Take-up silk execution

• Dedicated widths

• Electronic Selvedge System (ELSY)

• Center Electronic cutter

OptiMax-i 4R 220 denim © 2021 Picanol
OptiMax-i 4R 220 denim © 2021 Picanol


3. OptiMax-i-4-R-220 Worsted

A machine driven by data and focusing on sustainability inside.

Warp:

• Wo/PES Nm 38/1

• Density 31.5 ends/cm

• Drawing in width 188 cm

Weft:

• Wo/PA/EL Nm 42/1

• Density 27 picks/cm

Features:

• BlueTouch 15.6” display

• EcoFill 4c wasteless system

• Electronic Right Gripper Opener (ERGO)

• SmartEye filling detector

• Free Flight with carriers (VD)

• Quick Style Change (QSC)

• Smart signal lights




4. OmniPlus-i-4-P-190 Poplin

OmniPlus-i 4D 190 poplin © 2021 Picanol
OmniPlus-i 4D 190 poplin © 2021 Picanol



A proof that even light fabric segment can benefit from the OmniPlus-i platform. Digitization, maximum flexibility and running the highest speed.

Warp:

• Co Ne 120/2

• Density 51.2 ends/cm

• Drawing in width 170 cm

Weft:

• Co Ne 120/2

• Density 33.5 picks/cm

Features:

• BlueTouch 15.6” display

• Blue prewinders

• PosiJet main nozzle with automatic positioning

• PRA II Plus automatic pick removal and repair system

• Smart signal lights

• Quick Style Change (QSC)

 

5. TerryMax-i-8-R-260 Terry towel

TerryMax-i 8 J 260 © 2021 Picanol
TerryMax-i 8 J 260 © 2021 Picanol



The benchmark for terry weaving. No limitations in design, aiming at maximum performance in combination with ultimate quality.

Warp:

• Ground: Co Ne 24/2 - Pile: Co Ne 20/2

• Density 23 ends/cm

• Drawing in width 253 cm

Weft:

• Co Ne 14/1 + Chenille Nm 4 + PES 167 dtex + PP 300 den

• Density 20-144 picks/cm

Features:

• Pneumatic Pile Backrest

• Pile formation system

• Pile Monitoring

• BlueTouch 15.6” display

• Needle Roll Control

• Guided Gripper (GCv)

• Smart signal lights


6. OmniPlus-i-6-D-220 Ladies wear

Airjet equipped with a SmartShed. This is Picanol’s direct driven shedding motion and combines the best of different worlds: performance, flexibility & energy effectiveness.

Warp:

• PES 50 den + 100 den + 150 den

• Density 54 ends/cm

• Drawing in width 208 cm

Weft:

• PES/EL 150/40 den + 100/40 den + PES/CV/EL Ne 30/40 den

• Density 29 picks/cm

Features:

• SmartShed direct driven digital shedding motion

• BlueTouch 15.6” display

• Blue prewinders

• ARVD II Plus automated air saving system

• Smart signal lights


7. OptiMax-i-4-R-540 Coating

A new milestone in weaving coating fabrics. Free Flight gripper-system extended till 540 cm at highest insertion rates. No guide-hooks required anymore on widths above 360 cm!

Warp:

• PES 1100 dtex T0

• Density 7 ends/cm

• Drawing in width 520 cm

Weft:

• PES 1100 dtex T0

• Density 7 picks/cm

Features:

• Free Flight with raceboard (VB)

• Electronic Right Gripper Opener (ERGO)

• Direct Warp Control (DWC)

• Hybrid Harness Frames

• BlueTouch 15.6” display

• Smart signal lights

• Laserstop


8. GTMax-i-3.0S 8-J-340 (Bonas – Hall 3 – Booth D01)

Warp:

• PES 75 den

• Density 118 ends/cm

• Drawing in width 308 cm

Weft:

• PES 150 den + 100 den

• Density 120 picks/cm



More News from Picanol

#ITM 2026

Picanol to present its leading weaving technology at ITM 2026

Picanol is pleased to announce it will be participating in ITM 2026 in Istanbul. This is a key event for industry professionals to engage with the Turkish textile industry as well as the extensive international audience attending the fair. During the event, Picanol will present its latest innovations to the visitors in Hall 8, booth 802.

#ITMA Asia + CITME Singapore 2025

Picanol to exhibit latest weaving technology at ITMA ASIA + CITME, Singapore 2025

At ITMA ASIA + CITME 2025, Picanol (Hall 2 – Booth C204) will unveil the next-generation OmniPlus-i Connect airjet weaving machine, setting a new benchmark in airjet weaving technology. This latest evolution of Picanol’s trusted platform demonstrates how the company continues to deliver innovative, performance-driven solutions that meet the evolving challenges of modern weaving mills.

#ITMA Asia + CITME 2024

Picanol’s will unveil the Supermax, its new rapier weaving machine, at ITMA Asia + CITME 2024

ITMA ASIA + CITME 2024 represents an excellent opportunity for Picanol to once again demonstrate its technological leadership in both airjet and rapier weaving machines. Visitors to the event will experience Picanol’s world premiere of its brand-new Supermax rapier weaving machine. In total, Picanol will have four different high-tech weaving machines as well as its PicConnect digital platform on display.

#Weaving

Picanol opens its new training and service center in Tashkent (Uzbekistan)

Last week, Picanol inaugurated a new training and service center in Tashkent (Uzbekistan), in collaboration with its Uzbek agent, Baror Group. This state-of-the-art facility is strategically located to serve Picanol’s Central Asian customers more effectively. The opening ceremony was organized during CAITME 2024, which is the largest textile machinery exhibition in Central Asia, and it provided the ideal platform to showcase the new center to many industry professionals and customers from Uzbekistan, India, Pakistan, and Tajikistan, among other countries.

More News on ITMA Asia + CITME 2020

Latest News

#Yarn & Fiber

Expansive innovations converge in Shanghai as Yarn Expo Autumn 2026 opens doors next week

With just days to go, industry enthusiasm is building for the opening of Yarn Expo Autumn, Asia’s premier yarn and fibre trade fair, running from 25 – 27 August at the National Exhibition and Convention Center (Shanghai). Across 27,000 sqm in Hall 8.2, buyers will find nearly 600 exhibitors from 14 countries and regions, spread across seven specialised zones that range from cutting-edge man-made and regenerated fibres to time-honoured cashmere and silk. Beyond the extensive sourcing options, a fringe programme of trend showcases, presentations and product launches rounds out the three¬day event with design, innovation and market intelligence.

#Carpets

DOMOTEX Southeast Asia 2026 - Building the Gateway to ASEAN's fast-growing flooring market

From 11–13 November 2026, the inaugural DOMOTEX Southeast Asia will take place at BITEC (Bangkok International Trade & Exhibition Centre) in Bangkok, Thailand. Jointly organized by GLOBUS Events Limited and Hannover Milano Fairs Shanghai Ltd., with Worldex G.E.C. Co., Ltd. as the local partner, the exhibition marks the expansion of the internationally recognized DOMOTEX brand into Southeast Asia. As the newest addition to the global DOMOTEX portfolio, the exhibition has been developed specifically to serve the rapidly evolving ASEAN market, creating a dedicated business event for the flooring and interior finishing industry.

#Sustainability

Execs help steer Cascale’s consumer goods agenda in Athens

The 2026 Cascale Annual Meeting, taking place September 15–17 in Athens, Greece, will convene leaders from across the global consumer goods value chain to tackle one of the industry’s defining questions: how to accelerate meaningful, system-wide transformation. Guiding those conversations as this year’s co-chairs are Sean Cady, vice president, global sustainability, responsibility, trade, and government affairs at VF Corporation, and Dr. Delman Lee, vice chair at TAL Apparel Limited.

#Research & Development

MELANGE starts with a co-creative design workshop at Aalto University to shape the visual identity of this new project transforming colouration in textiles

Over the next three years, MELANGE will lower the environmental impact of interior textile production by moving colour design to the beginning of the manufacturing process. This Horizon Europe project officially started on 1 August 2026, and will be publicly launched on 27 August 2026.

TOP