[pageLogInLogOut]

#Recycling / Circular Economy

Circular economy in the automotive industry: Tool supports the development of recyclable components

Sustainable car of the future: The CYCLOMETRIC tool is designed to ensure that all components are recyclable even during development. Picture: Fraunhofer IAO
Automotive components no longer only have to meet the highest technological standards, they also have to be sustainable and recyclable. In the future, engineers will not only be required to keep an eye on the final product during development, but also on its end of life. Since humans prefer to think linearly rather than in cycles, artificial intelligence is expected to help them do so.

The German Institutes of Textile and Fiber Research Denkendorf (DITF) are one of the project partners in the CYCLOMETRIC research project, which is funded by the German Federal Ministry of Education and Research (BMBF) and supervised by the Project Management Agency Karlsruhe (PTKA). A tool is being developed that makes suggestions for improvement even during product planning.

Recycling of high-performance materials often fails because the materials cannot be separated into their original components. CYCLOMETRIC aims to ensure that this problem does not have to be solved at the end of a product's life cycle. With current methods and tools, environmental impacts are often not examined until near the end of development or even after production has begun - even though the most relevant decisions about product properties are made much earlier. The new system helps to make the right decisions during development. To this end, data, information and knowledge are analyzed and evaluated across all development phases and interfaces. Research approaches from advanced systems engineering and model-based systems engineering are used in conjunction with life cycle assessment methods and business model analysis.

Product developers juggle complex parameters such as producibility, recyclability, reusability, CO2 emissions and costs on a daily basis. Last but not least, the expectations and habits of customers have to be taken into account. Whether selecting materials or planning production steps, the tool calculates the impact and makes suggestions for improvement.

In the CYCOMETRIC project, a center console trim serves as an application example for the digital tool. It is made of sustainable textile materials and has smart functions integrated into the textile. Nevertheless, the finished tool is not limited to the automotive industry. It can be used in all industrial fields.

The DITF's task is to select and test suitable materials. The team develops the appropriate manufacturing and processing procedures and creates a prototype. Test runs on the functional, everyday-, long-term and extreme suitability of the textile structures and fiber composites are carried out at the test laboratories, which can be reproduced in subsequent applications. Concepts for sensors and actuators are being developed for the smart functions of the console.

As a partner in the ARENA2036 research campus, the DITF bring extensive experience in lightweight construction through function integration in automobiles. After completion of the project, the Denkendorf researchers will advise companies on how textiles can be increasingly used in vehicle interiors.


Project Partners

  • Fraunhofer-Institute für Arbeitswirtschaft und Organisation IAO sowie für Bauphysik IBP
  • Institut für Arbeitswissenschaft und Technologiemanagement IAT, Institut für Flugzeugbau IFB sowie Institut für Akustik und Bauphysik IABP der Universität Stuttgart
  • Deutsche Institute für Textil- und Faserforschung Denkendorf (DITF)
  • ESB Business School der Hochschule Reutlingen
  • Schweizer Design Consulting GmbH
  • Forward Engineering GmbH
  • IILS Ingenieurgesellschaft für Intelligente Lösungen und Systeme mbH
  • DXC Technology Deutschland GmbH
  • Lotus Tech Innovation Centre GmbH
  • Associating Partner: ARENA2036 e.V.


More News from TEXDATA International

#Digital Printing

From a bedroom startup to 3,000 designs: How Lonely Kids Club built its business with DTG printing

Founded in Sydney in 2011, independent clothing label Lonely Kids Club has grown from a bedroom startup into a business offering around 3,000 graphic T-shirt designs. With its own production studio, direct-to-garment printing and a demand-driven manufacturing model, the company demonstrates how smaller apparel brands can combine creative independence with flexible production – while navigating the everyday challenges of quality control, workflow efficiency and sustainability.

#India ITME 2026

India’s textile industry: Current position, growth targets and industrial development

With ambitious export targets, major investments in manufacturing infrastructure and new international trade agreements, India is pursuing a comprehensive development strategy for its textile and apparel industry. An overview of the industry’s current position, government initiatives, progress achieved and challenges ahead.

#Weaving

“A complex design is only useful if the machine can reproduce it consistently”

Andreas Schnabel, Head of R&D for Technical Weaving Systems at Stäubli, discusses how 3D weaving can create textile reinforcements tailored to the loads within a composite component, where near-net-shape weaving can reduce processing steps and material waste, and what it takes to produce complex structures reliably and economically. He also explains how manufacturers can adapt Stäubli’s modular TF weaving platforms to new applications and how the company’s centre of excellence in Bayreuth supports the transition from research to industrial production.

#India ITME 2026

India ITME 2026: Textile technology meets India's investment ambitions

With ambitious growth targets, government incentive programmes and industrial development initiatives already underway, India is preparing for the next stage of its textile transformation. Against this backdrop, the 12th India ITME, taking place in Greater Noida from 4 to 9 December 2026, arrives at a particularly important moment for machinery manufacturers and textile producers alike.

More News on Recycling / Circular Economy

#Recycled Fibers

Recover and SUPIMA partner to develop recycled Pima cotton fibers and yarns

Recover and SUPIMA have partnered to turn waste from SUPIMA cotton production into a new line of recycled fibers and yarns. The collaboration will explore how recycled American-grown Pima cotton can be used in a wider range of yarns and garments for the premium market.

#Recycling / Circular Economy

ReSpin founder Åsa Strandberg receives Innovation Champion of the Year 2026 award

Åsa Strandberg, founder and CEO of Swedish textile recycling company ReSpin AB, has been named Innovation Champion of the Year 2026. The award recognises her development of RespinJenny, a patented technology designed to recycle textile waste into new, high-quality fibres without using water, chemicals or additional virgin raw materials. The distinction was presented by the Olle Oscarsson Foundation and Axera Inkubator at Guldgalan in Sweden.

#Recycling / Circular Economy

Circulose resumes recycling of discarded cotton textiles and appoints interim CEO

Circulose today announced its restart of commercial-scale production plant at Ortviken in Sundsvall, Sweden, marking a significant step in scaling next-generation materials for the global fashion industry. The Ortviken plant is the world’s first commercial-scale chemical textile recycling facility. Its restart demonstrates that the fashion industry is seeking ways to scale proven solutions that move beyond pilots and into commercial production.

#Recycled Fibers

Reju expands textile-to-textile recycling network with six international fabric manufacturers

Reju, a textile-to-textile regeneration company, is expanding its industrial network through collaborations with six fabric manufacturers in Europe and the Americas. The initiative aims to accelerate the integration of regenerated polyester into textile manufacturing and support the development of finished fabrics for commercial applications.

Latest News

#Industry 4.0 / Digitalization

Smartex.ai names Tony Fadell chairman and previews new fabric inspection system

Smartex.ai has appointed Tony Fadell as chairman and will present its new fabric inspection hardware and software at SmartCollab Hong Kong on 27 November. Fadell co-designed Inspect, the hardware at the centre of the system, which Smartex developed with a supplier in H&M Group’s network.

#Technical Textiles

Textile ETP sets out strategy to protect Europe’s technical textile capabilities

Textile ETP’s SmartX Innovation Hub has published a strategy to safeguard Europe’s ability to develop, test and manufacture advanced technical textiles for defence, personal protection and aerospace. The strategy calls for EU research funding that extends through qualification and initial industrial production, and for public procurement to give greater weight to quality and security of supply.

#Industry 4.0 / Digitalization

Coats Digital wins SaaS award for AI in apparel manufacturing

Coats Digital has been named Best Company in AI-Powered Fashion Technology at the 2026 Best in SaaS Awards. The company’s AI applications cover garment costing, the analysis of operational data and the use of computer vision to study how tasks are performed on the factory floor.

#ITMA Asia + CITME 2026

ITMA ASIA + CITME 2026: Shanghai prepares for a record edition

With record demand for exhibition space, a strong presence of international technology suppliers and growing interest in automation and intelligent manufacturing, ITMA ASIA + CITME 2026 will provide an important overview of technological developments in the world’s largest textile producing region.

TOP