[pageLogInLogOut]

#Nonwovens

PET spunbond from China – EDANA welcomes imposition of provisional anti-dumping measures

On 13 May 2026, after eight months of investigation, the European Commission imposed provisional anti-dumping duties of 45.6-50.0% on imports of PET spunbond from China. EDANA welcomes this expression of the Commission’s clear determination to protect EU industries from the unfair trade practices of Chinese producers.

According to the Commission’s findings, Chinese producers of PET spunbond have engaged in dumping practices on the EU market that have caused material injury to the EU industry, including declines in production, sales, and profitability. The imposition of provisional AD measures is therefore essential to re-establish a level playing field, to preserve European jobs, and to foster growth and innovation in the EU.

“It is encouraging to see the EU institutions are determined to support EU industries during these globally difficult times. EU production creates a lot of added value to our economy, and it is essential for the stability and prosperity of our continent that EU industrial value chains are not exposed to unfair, state-supported market behaviours on their home markets”, said Jacques Prigneaux, Market Analysis & Economic Affairs Director at EDANA.

The provisional anti-dumping duties will apply until 13 November 2026, by when the Commission must make a final decision in the case on whether to impose definitive anti-dumping duties for a 5-year period. At that time, the Commission may also decide to impose the definitive AD measures retroactively up to 90 days prior to the date of application of the provisional measures.

Jacques Prigneaux added: “EDANA and the EU industry will continue to cooperate fully with the Commission during the remainder of the proceedings. We look forward to final measures which maintain a level playing field on the EU market. We also want to remind all parties of the legal requirement to declare imports under the correct customs code. Accurate use of TARIC codes is fundamental to ensuring the properapplication of trade measures and avoiding material risks in customs compliance and import processing.”

The products concerned are defined as certain non-woven needle-punched sheets of polyester filaments, whether or not reinforced by glass fibers, weighing more than 70 g/m², of a thickness exceeding 0.5 mm but not exceeding 1.8 mm, impregnated with one or more binders, containing less than 30 % of glass fibers by weight, not coated or covered, and are to be classified under CN codes ex 5603 13 90, 5603 14 20 and ex 5603 14 80 (TARIC codes 5603 13 90 70 and 5603 14 80 70).



More News from EDANA

#Nonwovens

EDANA welcomes definitive EU anti-dumping measures on Chinese PET spunbond

EDANA, the international association serving the nonwovens and related industries, has welcomed the European Commission's decision to impose definitive anti-dumping duties on imports of PET spunbond originating in China. The association considers the measures an important step towards restoring fair competition and safeguarding European industrial capacity.

#Nonwovens

25 years in the room: EDANA’s OUTLOOK™ returns to Cascais to shape a changing industry

The market does not wait, and it does not grant easy answers. Across the absorbent hygiene, personal care, and wipes sectors, business is undergoing a period of intense, necessary adjustment. New European rules on packaging, single-use items, product safety, and end-of-life are forcing companies to drop old assumptions about materials and performance. At the same time, producers must keep their goods safe, reliable, and affordable for the babies and aging adults, who rely on them every day.

#Technical Textiles

FILTREX™ India 2026 to bring global filtration leaders together in New Delhi

EDANA, the voice of nonwovens, in partnership with the Business Coordination House (BCH), will welcome filtration professionals from across the world to FILTREX™ India 2026, taking place on 7–8 October 2026 at the Eros Hotel, New Delhi.

#Associations

Sustainability: European industry calls on EU to keep Single-Use Plastics Directive unchanged

A broad coalition of European industry associations, including EDANA, Euratex and Plastics Europe, has urged EU institutions to maintain the current legal framework of the Single-Use Plastics Directive (SUPD). In a joint statement, the organisations argue that reopening the Directive at this stage would create legal uncertainty, increase regulatory complexity and undermine investment, while its implementation across the European Union is still incomplete.

More News on Nonwovens

#Nonwovens

Magnera highlights HighPleat™ filtration media technology at FiltXPO 2026

At FiltXPO 2026, held on October 28–29 at the Minneapolis Convention Center in Minneapolis, Minnesota, Magnera highlighted advances in air filtration media architecture, with a particular focus on its HighPleat™ platform for MERV 8–10 applications. The technology combines a lofted fiber structure with optimized pore architecture to address the challenge of balancing filtration efficiency, airflow resistance and contaminant-holding capacity.

#Nonwovens

Ahlstrom expands depth filtration media production capacity at US facility

Ahlstrom has completed a major investment in its Kingston manufacturing facility in New York, USA, expanding production capacity for high-performance depth filtration media. The modernization of Line 3 is designed to improve manufacturing efficiency, enhance quality control and increase flexibility in producing different product widths.

#Nonwovens

Freudenberg presents Filtura® filter media for demanding industrial applications at FSA 2026

Freudenberg Performance Materials will present its Filtura® filter media for demanding industrial filtration applications at Filtration & Separation Asia (FSA), taking place from November 18 to 20, 2026, in Shanghai, China. The focus will be on pleatable filter media for air pollution control (APC), designed for applications including metal processing, lithium-ion battery material production and recycling, and metal additive manufacturing.

Latest News

#Recycling / Circular Economy

Circulose resumes recycling of discarded cotton textiles and appoints interim CEO

Circulose today announced its restart of commercial-scale production plant at Ortviken in Sundsvall, Sweden, marking a significant step in scaling next-generation materials for the global fashion industry. The Ortviken plant is the world’s first commercial-scale chemical textile recycling facility. Its restart demonstrates that the fashion industry is seeking ways to scale proven solutions that move beyond pilots and into commercial production.

#ITMA Asia + CITME 2026

Itema brings textile versatility to ITMA ASIA + CITME 2026

Itema announces its participation in ITMA ASIA + CITME 2026, taking place November 20–24 at the National Exhibition and Convention Center in Shanghai. In Hall 3 – Stand D06, the company will showcase two Galileo-RX rapier weaving machines weaving heavy denim and conveyor belt fabrics, demonstrating its ability to address different textile requirements with application-specific configurations. Five additional Itema machines at partner booths will extend the exhibition lineup to upper shoe fabric, label, Jacquard leno fabrics, and shirting, offering visitors a broader view of Itema rapier and air-jet weaving technologies.

#Dyeing, Drying, Finishing

AEI reaps the benefits of all-electric new Monforts range

The impact of the rising cost of energy on the textile industry has been well documented, with some European countries paying up to seven times more to run their manufacturing operations than in other regions of the world.

#ITMA Asia + CITME 2026

Brückner showcases sustainable technologies for the future of textile finishing at ITMA ASIA 2026

With rising energy costs, increasing environmental requirements, and growing competitive pressure, textile manufacturers worldwide are facing the challenge of making their production processes both more sustainable and more cost-effective. As one of the world's leading specialists in textile finishing machinery, Brückner will present innovative solutions and advanced production technologies at ITMA ASIA 2026 in Shanghai. These technologies can play a key role in significantly reducing both energy consumption and emissions.

TOP