[pageLogInLogOut]

#Man-Made Fibers

UNIFI launches REPREVE® with CiCLO® technology

UNIFI, Inc. (NYSE: UFI), the makers of REPREVE® and one of the world’s leading innovators in recycled and synthetic yarns, launched REPREVE with CiCLO® technology, recycled polyester and nylon embedded with a biodegradable technology that enables synthetics to break down naturally. REPREVE with CiCLO technology was created in collaboration with Intrinsic Advanced Materials, LLC, a joint venture between Parkdale Advanced Materials, Inc. and Intrinsic Textiles Group, LLC.

REPREVE with CiCLO technology is enhanced with a patented additive at the fiber level that allows synthetic yarns to more closely mimic natural materials such as wool. This will enable them to break down in environments such as soil and seawater without compromising performance, durability, and dyeability. These new offerings are designed to help tackle the environmental impact of microplastic fiber pollution from synthetic textile shedding.

“We can always do more to lessen our environmental impact throughout the product life cycle,” said Eddie Ingle, Chief Executive Officer of UNIFI®, Inc. “Our collaboration with Intrinsic Advanced Materials addresses the worldwide issue of synthetic microfiber shedding by providing a globally available solution that mills, brands, and retailers can now integrate to reduce microplastic fiber pollution.”

REPREVE with CiCLO technology enables synthetic fibers to naturally biodegrade under prolonged exposure to moisture and microorganisms, significantly reducing the time synthetic fibers (microplastics) remain in the environment. Today, products containing CiCLO, are utilized by forward-thinking, sustainable brands, including Bass Pro Shops, Billabong, Champion, Oakley, and Target.

“Synthetic textiles are a major contributor to microplastic fiber pollution, and it is a challenge that requires industry collaboration,” said Cheryl Smyre, Vice President of Parkdale Advanced Materials. “This joint initiative integrates two powerful solutions—REPREVE and CiCLO technology—to help maximize recycled content while addressing microfiber pollution at the source. As brands navigate growing sustainability commitments and regulatory demands, the collaboration delivers a proven and effective solution that empowers brands to address two critical environmental issues while preserving performance and recyclability,” added Smyre.

All REPREVE-branded products can be produced with the CiCLO additive, including REPREVE Takeback™ and REPREVE Our Ocean®. Available globally, REPREVE with CiCLO technology is a drop-in solution for brands and retailers, allowing them to meet global needs for reducing microplastic fiber pollution.

UNIFI showcased REPREVE with CiCLO technology at Booth 815, and CiCLO technology at Booth 712 during the Functional Fabric Fair, held April 14-16, 2025, in the Oregon Convention Center.

For more information, visit www.repreve.com and www.ciclotextiles.com.



More News from UNIFI, Inc.

#Yarns

UNIFI® introduces Luxel™: A Linen-inspired, easy-care performance yarn

Unifi, Inc. (NYSE: UFI), the makers of REPREVE® and one of the world’s leading innovators in recycled and synthetic yarns, today announced the launch of Luxel™, a groundbreaking yarn technology that combines the luxurious look and feel of linen with high-performance, easy-care, and textile-to-textile recycled materials.

#Yarn & Fiber

Unifi launches A.M.Y.® Peppermint odor control and expands REPREVE® circular offerings

UNIFI, Inc. (NYSE: UFI), the makers of REPREVE® and one of the world’s leading innovators in recycled and synthetic yarns, has launched A.M.Y.® Peppermint, a naturally deodorizing yarn engineered for long-lasting freshness. The latest innovation within UNIFI®’s technology platform delivers built-in odor control using sustainably sourced peppermint oil, offering a botanical alternative to traditional antimicrobial treatments. UNIFI also announces the global introduction of REPREVE Takeback™ and ThermaLoop™ insulation, both made entirely from textile waste.

#Yarn & Fiber

UNIFI® announces the sale of manufacturing facility

UNIFI, Inc. (NYSE: UFI) (together with its consolidated subsidiaries, “UNIFI”), the makers of REPREVE® and one of the world’s leading innovators in recycled and synthetic yarns, announced the closing of the sale of its manufacturing facility in Madison, North Carolina to a third-party buyer.

#Yarn & Fiber

UNIFI® launches FORTISYN™, an inherently durable yarn for military and tactical gear

UNIFI, Inc. (NYSE: UFI), the makers of REPREVE® and one of the world’s leading innovators in recycled and synthetic yarns, today launched Fortisyn™, an abrasion-resistant yarn engineered for ultimate durability in tactical applications. This innovative yarn provides fabrics with enhanced tear and tensile strength, offering a robust solution for military and first responder uniforms and tactical gear. Fortisyn is available made-in-USA for Berry Amendment compliant applications.

More News on Man-Made Fibers

#Techtextil 2026

Gebr. Otto highlights versatility at Techtextil with regional supply chains, yarn innovations and new hygiene segment

At this year’s Techtextil, Gebr. Otto places its versatility at the center of its presentation. In addition to spinning, twisting and dyeing – traditionally focused on fine cotton – textile processors will also find a competent development partner for technical specialty solutions. The Dietenheim-based spinning mill has now built up a decade of experience in the production of technical yarns, particularly from aramids. A new hygiene segment has also been established, where yarns for medical and hygiene products are currently being produced. In the future, this department could also develop textile products for the food sector. Gebr. Otto will once again be present at the BW-i joint stand, booth D81, hall 12.1. What is wound onto the spool is determined by the customer: Gebr. Otto develops according to specific customer requirements and transforms its own ideas into yarn innovations.

#Man-Made Fibers

OnceMore® from Södra brings end-to-end traceability for circular Man-made Cellulosic Fibers (MMCF) using TextileGenesis

OnceMore® from Södra, the world’s first large-scale process for recycling blended fabrics into high‐quality dissolving pulp, will begin using TextileGenesis, a Lectra company, to strengthen traceability from raw material to retail across the value chain. OnceMore® produces dissolving pulp made from blended textile waste and wood sourced from responsibly managed Swedish forests. By integrating TextileGenesis, OnceMore® supports the growing need for verified data and secure, transparent tracking throughout increasingly complex supply chain.

#Man-Made Fibers

Lenzing advances its transformation: Higher EBITDA, stronger free cash flow and more than EUR 200 million in cost savings

The business performance of the Lenzing Group in 2025 was affected particularly in the second half of the year by external factors such as international tariff measures, subdued demand and declining market prices. As a result, revenue decreased slightly by 2.3 percent to EUR 2.6 billion, primarily due to lower fiber sales volumes and lower prices for fibers and pulp, which were further negatively impacted by currency developments. Nevertheless, thanks to the comprehensive Performance Program, Lenzing was able to improve its operating performance and key financial indicators compared with the previous year.

#Man-Made Fibers

“Lead Transformation – Generate Impact”: Lenzing presents its 2025 Annual and Sustainability Report

The Lenzing Group has published its 2025 Annual and Sustainability Report, entitled LEAD TRANSFORMATION – GENERATE IMPACT. The report shows how Lenzing is actively shaping change in the industry and making a lasting impact: economically, ecologically, and socially. Lenzing is consistently focused on the future: with targeted investments in premiumization, excellence, innovation, and sustainability, the company is strengthening its position as a leading provider of sustainable, cellulose-based premium fibers. The combined report is available in digital format.

Latest News

#Textile processing

Major expansion for ACG Kinna follows record year

In response to growing demand for its full textile and finished product line automation services, ACG Kinna – a member of TMAS, the Swedish textile machinery association – has inaugurated a 1,000-square-metre expansion at its headquarters in Skene, Sweden.

#Textiles & Apparel / Garment

YKK launches “YZiP® Light” aluminum alloy zipper for cotton pants

YKK Corporation (Headquarters: Chiyoda-ku, Tokyo; President: Koichi Matsushima; hereafter, YKK) has launched YZiP® Light, a lightweight aluminum alloy zipper for cotton pants, with sales beginning in late March. The introduction of YZiP® Light expands YKK’s zipper portfolio—led by the flagship YZiP® copper alloy zipper—providing customers with greater flexibility to meet diverse garment needs.

#Techtextil 2026

Shima Seiki showcases WHOLEGARMENT® and 3D knitting solutions for technical textiles at Techtextil 2026

Leading textile technology solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, along with its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will be participating in the Techtextil 2026 exhibition in Frankfurt, Germany next month. On display will be WHOLEGARMENT® and other advanced three-dimensional knitting applications across a wide range of industries besides fashion apparel that are not typically associated with knitting, such as technical textiles using industrial materials and advanced three-dimensional knitting.

#Raw Materials

The 83rd Plenary Meeting: Reports from the ICAC Secretariat

Every year, one of the most anticipated sessions at the International Cotton Advisory Committee's (ICAC) Plenary Meeting is the Reports from the Secretariat — and the 83rd edition in Bremen, Germany, did not disappoint.

TOP