#ITMA Asia + CITME Singapore 2025

2025-09-11

Responding to market demand with the new Monforts VertiDry

At the forthcoming ITMA Asia + CITME textile machinery exhibition in Singapore this October, Monforts will introduce the new VertiDry, a vertical dryer for use in combination with coating machines, padders or Monforts EcoApplicator units in the special finishing of technical textiles.

The fully contactless and energy optimised convection dryer is intended for use in combination with a stenter, either before or after it, depending on the specific application, for the essential pre-drying of sensitive fabrics, as well as after the coating of airbags, denim fabrics and glass-fibre substrates. Other envisaged applications include the finishing of sportswear, outerwear, carpets, geotextiles and tarpaulins.

The VertiDry can be integrated into both new and existing finishing lines. A single unit can accommodate approximately eight metres of fabric at any given time and multi-storey versions are also possible. This makes it very adaptable to finishing line configurations.

The new Monforts VertiDry. © 2025 Monforts

Power options

In addition, the VertiDry can be powered by all available heating sources, or combinations of heating sources depending on the most economic route for the individual mill. The unit is further equipped with an integrated exhaust air duct and can also be connected to a heat recovery system such as the Monforts Energy Tower.

Different nozzle types are available for the unit which will be supplied pre-erected for shortest installation times.

“The new VertiDry has been designed in response to demands from the market for a space and energy saving vertical dryer to fulfil the demand in terms of CO2 reduction and the need to integrate into special processes, especially in the treatment of technical textiles,” says Monforts Marketing Manager Nicole Croonenbroek. “With its contactless drying it will help our customers to produce a wide range of high-quality, added value fabrics efficiently and economically.”

To learn more about the new vertical dryer VertiDry please visit Monforts at ITMA Asia: H3 A301!

Monforts on the move in textile growth markets

During September, specialists from Monforts will be attending events in two of the fastest growing countries for textile manufacturing – Kenya and Uzbekistan – before once again looking forward to meeting customers old and new at the 2026 Igatex exhibition which is taking place in Lahore, Pakistan, from October 15-18.

India becomes growth engine for the warp knitting industry

ITMA ASIA 2025 exceeded all expectations for KARL MAYER – above all thanks to the strong interest from India: around 30% of the qualified discussions were held with partners from this traditional textile country. The response underlines the growing importance of the Indian market, which could become the second largest sales region for KARL MAYER after China. The warp knitting industry in particular is developing dynamically.

India ITME Society pushes trade & technology alliances in Singapore

India ITME Society hosted India Networking Program - Fabricating the Future of Textile Industry- From Heritage to High-Tech” on 29th October 2025 at Singapore an exclusive gathering of Ministry of Textile Officials, Embassy Officials, Entrepreneurs, Technocrats, Industry Organizations and Media Personnel's designed to foster collaboration, exchange ideas and explore opportunities in the Indian Textile & Textile Engineering Sector.

Innovation and customer proximity – KARL MAYER’s clear focus makes an impression

ITMA ASIA in Singapore was a resounding success for KARL MAYER, exceeding all expectations. The company welcomed visitors from 39 countries and held around 570 expert discussions. Most guests came from India, followed by China, Indonesia and Pakistan. The exchange with them was both well-founded and targeted. Conversation topics ranged from investment projects and new technologies to opportunities for cooperation and business expansion.

FET highlights advances in fibre spinning technology at Dornbirn Global Fiber Congress

Fibre Extrusion Technology Limited (FET) presented its latest developments in fibre spinning technology at the Dornbirn Global Fiber Congress in Austria in September 2026. In a presentation entitled “Spinning a good yarn”, Dr Jonny Hunter examined recent technological developments and challenges facing the fibre industry, highlighting the company's expanding range of specialised fibre extrusion and spinning systems.

Vietnam’s market evolution creates new sourcing opportunities at VIATT 2027

As Vietnam’s textile industry continues to upgrade and scale, new opportunities are emerging for suppliers of advanced raw materials, design-led fabrics, production technologies, and sustainability solutions. The Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will return 24 – 26 February 2027, presenting a cross-sector platform – spanning apparel, home and technical categories – for overseas companies to connect with manufacturers, brands, sourcing offices, retailers, and industry buyers from Vietnam, ASEAN, and beyond.

Textile performance for the global market: Heimtextil 2027 connects interior design, quality and global sourcing

With the new premium segment Carpets & Rugs Excellence, the Comfort & Connect area and the Heimtextil Trends 27/28, Heimtextil 2027 is sharpening its offering for a market under pressure. Today, textile products need to prove their quality, functionality and long-term value. From 12 to 15 January 2027, the leading trade fair for home and contract textiles and textile design showcases relevant innovations across the entire value chain: from fibres and yarns to designs by international studios and emerging talent, through to finished collections, functional contract textiles and complete interior solutions.