[pageLogInLogOut]

#Dyeing, Drying, Finishing

Monforts in two-centre VDMA delegation to Pakistan

The busy Monforts stand at this year’s ITMA textile machinery exhibition (c) 2019 Monforts
Monforts will be part of the VDMA Textile Machinery Association’s forthcoming delegation to Pakistan which will take place from November 11th to 14th.

In total, 14 companies covering the entire textile chain are participating in the visit, which will showcase the benefits and technological innovations of German textile machinery at seminars held in both Karachi and Lahore.

A technical seminar in Karachi will be held at the Hotel Karachi Avari Towers on November 12th and a second in Lahore will be held on November 14th at the Hotel Avari Lahore Towers.

“The regions surrounding both of these cities have become major hubs for textile manufacturing, especially in areas such as home textiles and denim, where Monforts enjoys market-leading positions with its finishing systems,” says area sales manager Manfred Havenlith, who in addition to presenting at the seminars, will be holding meetings and networking with existing Monforts customers and potential new ones during the trip. “The Punjab region around Karachi, as Pakistan’s largest city, for example, is now dense with denim manufacturers, many of whom have already expressed keen interest in the new Monforts CYD continuous yarn dyeing system we introduced at ITMA 2019 in Barcelona in June.” 

The CYD system integrates new functions and processes into the weaving preparation processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, ?exibility, economic viability and productivity. The unique Eco Bleach process is the first bleaching system for yarn treatment available on the market and is combined with the washing units, after which the fabric is then dyed immediately, resulting in considerable savings in wastewater and chemicals.

It is possible to process short batches of yarn in order to produce minimum runs of finished fabrics in a single continuous process and by comparing the usual processing sequences within the denim industry with the new CYD system, the advantages become immediately clear. 

Key customers

Existing Monforts denim manufacturing customers in Karachi include Artistic Milliners, Artistic Fabric & Garment Industries (AFGI), Denim Clothing Company, Denim International, Kasim, Rajby Industries and Soorty. Home textiles customers meanwhile include Afroze, Al Karam, Lucky Textile Mills, Mustaqim and Yunus.

The situation is similar in the region around Pakistan’s second largest city, Lahore, where major Monforts customers include Azgard-9, Crescent Bahuman, Crestex, Kohinoor Textile Mills, Naveena, Sapphire Textiles and US Denim Mills. 

On Monday 11th the VDMA delegation will also be visiting Karachi-headquartered Gul Ahmed Textile Mills, a leader in the home textiles field, which operates both yarn dyeing and fabric finishing lines from Monforts, and in recent years has expanded into retail, with over 40 stores across Pakistan, offering a diverse range of products, from home accessories to fashion clothing.


Trading partner

The European Union is Pakistan’s most important trading partner and textiles and clothing accounted for over 80% of its total exports of €6.8 billion to the EU in 2018, according to the European Commission.

Starting from January 2014, Pakistan has benefited from generous tariff preferences – mostly zero duties – under the EU’s GSP+ arrangement, which aims to support the country’s sustainable development and good governance. In order to maintain GSP+, Pakistan has to effectively implement 27 core international conventions on human and labour rights, environmental protection and good governance.

The VDMA delegation is being organised by SBS systems for business solutions on behalf of the German Federal Ministry for Economic Affairs and Energy (BMWi), in collaboration with the German Pakistan Chamber of Commerce and Industry (GPCCI) and with the technical support of the VDMA Textile Machinery Association.

Monforts area sales manager Manfred Havenlith (c) 2019 Monforts
Monforts area sales manager Manfred Havenlith (c) 2019 Monforts




More News from A. Monforts Textilmaschinen GmbH & Co. KG

#Dyeing, Drying, Finishing

AEI reaps the benefits of all-electric new Monforts range

The impact of the rising cost of energy on the textile industry has been well documented, with some European countries paying up to seven times more to run their manufacturing operations than in other regions of the world.

#India ITME 2026

Monforts ready for India’s next phase of textile growth at ITME 2026

Advanced finishing, coating and energy-efficient processing will be highlighted by Monforts at India ITME 2026, as the region’s textile manufacturers increasingly look beyond volume production towards higher-value fabrics. The German finishing machinery specialist sees considerable potential in India as investment continues in conventional apparel and home textiles alongside rapidly developing markets for technical textiles, activewear, sportswear, filtration and automotive applications.

#IGATEX 2026

Impressive savings with Monforts’ stand-alone air/air heat exchanger

Having maintained an 80% share of Pakistan’s new stenter market with MONTEX machines for over 20 years and additionally now installed over 40 THERMEX dyeing ranges in the country, Monforts will highlight the benefits of its latest Universal Energy Tower at IGATEX 2026.

#Dyeing, Drying, Finishing

Turning new ideas into industrial reality at the Monforts ATC

The Monforts Advanced Technology Centre (ATC), initially opened in 2103 and subsequently expanded, continues to be an invaluable resource to customers from around the world in achieving new standards in fabric finishing.

More News on Dyeing, Drying, Finishing

Latest News

#ITMA Asia + CITME 2026

ITMA ASIA + CITME 2026 opens in Shanghai, showcasing intelligent and sustainable textile manufacturing

ITMA ASIA + CITME 2026 opened today at the National Exhibition and Convention Center in Shanghai, bringing the global textile machinery industry together from 20 to 24 November.

#Associations

Christoph René Holler to succeed Uwe Mazura as managing director of textil+mode

Christoph René Holler will take over as managing director of textil+mode, the German textile and fashion industry confederation, on 1 January 2027. He succeeds Uwe Mazura, who has led the association for 13 years and will remain in charge of collective bargaining policy through the next round of negotiations before retiring.

#Heimtextil 2027

Heimtextil and The Florentin showcase the role of textiles in hotel design

Heimtextil has partnered with Frankfurt hotel The Florentin by Althoff Collection for its new Interior.Architecture.Hospitality campaign. The collaboration will give architects, interior designers and other contract-sector professionals a closer look at how textiles were used in the hotel. The two studios behind the project will discuss their work at Heimtextil on 14 January 2027 in Hall 4.1.

#EU Textile Strategy

EU Commission proposes advanced materials agenda with targets for 2035

The European Commission has proposed an Advanced Materials for Europe agenda to accelerate the development, production and adoption of safer and more sustainable advanced materials. The proposal sets three benchmarks for 2035 and calls for closer coordination among EU member states to help move new materials from the laboratory into industrial production.

TOP