#Digital Printing

2023-05-17

Durst Group installs one of the biggest solar panel plants in South Tyrol

Durst Group, the leading manufacturer of advanced digital printing and production technologies, announced today the installation of a state-of-the-art solar panel plant at its headquarters in Brixen, South Tyrol. This initiative is part of the company's ongoing sustainability efforts and commitment to reducing its carbon footprint.

The new solar panel plant, one of the biggest in South Tyrol, has a capacity of 1,569 KWp / 1.57 MWp and is expected to generate over 1,700,000 KWh / 1,700 MWh of energy annually. This corresponds approximately to the electricity demand of 550 single-family households and more than 50% of the energy demand of Durst Brixen. The installation consists of 3,410 modules, two separate plants, and 14 inverters.

"Following our installation of a solar panel plant at our production site in Lienz/Austria in 2022, we are thrilled to have installed now one of the biggest solar panel plants in South Tyrol at our headquarters in Brixen," said Christoph Gamper, CEO of Durst Group. "Our commitment to sustainability is a core value at Durst, and this new installation is a testament to that commitment. We are proud to take this important step towards reducing our carbon footprint and making a positive impact on the environment."

The plant will produce 70% of the generated energy for direct self-consumption, while the remaining 30% will be available for feed-in or future storage solution. The technology used includes power optimizers by Solaredge that maintain the performance of a series of modules even in the presence of partial shading or pollution.

The project, which was executed by Leitner Electro, took six months to complete, including a winter/bad weather break. Stadtwerke Brixen provided friendly support for the project.

Durst Como is born

The Durst Group, a leading manufacturer of digital printing and production technologies, is setting another milestone in the digital textile industry: the merger with Aleph SrL is entering its final phase. With legal completion expected by the end of 2025, Aleph will be fully integrated into the Durst Group, and Durst Como will emerge as a new center of excellence for digital textile printing.

USColorworks expands digital platform with Kornit Atlas MATRIX and Atlas MAX PLUS solutions

Kornit Digital Ltd. (NASDAQ: KRNT), a global pioneer in sustainable, on-demand digital fashion and textile production, today announced that USColorworks, a North Carolina-based apparel decoration and fulfillment company specializing in custom and on-demand printing for retail and promotional markets, has expanded its Kornit digital production platform with the addition of Atlas MATRIX and Atlas MAX PLUS systems to deliver high-quality, on-demand apparel across cotton, blended fabrics and polyester.

DTF vs DTG Printing - The technologies shaping today’s custom merchandise market

From sportswear to branded tote bags, custom merchandise continues to grow in popularity across sectors, driving print shops to cater to short runs, personalisation, and rapid turnaround. As print providers look to this market, two printing technologies often stand out: Direct‑to‑Film (DTF) and Direct‑to‑Garment (DTG). Each offers its own benefits, and understanding these differences helps determine the most suitable production method for print service providers.

Mimaki celebrates Triple EDP Award win at FESPA 2026

Mimaki Europe, a leading manufacturer of industrial inkjet printers and cutting plotters, was presented with 3 EDP Awards at the association’s 2026 ceremony, held at FESPA Global Print Expo. These highly acclaimed awards celebrate best-in-class innovation across the print industry, and Mimaki was honoured in three different categories.

EFI brings high-performance display graphics, packaging, and textile printing innovations to FESPA 2026

Electronics For Imaging, Inc. (EFI™) is bringing a broad range of new hybrid, roll-to-roll, and textile inkjet innovations to FESPA Global Print Expo 2026, taking place 19-22 May at Fira Barcelona Gran Via. Visitors to the EFI stand (Hall 3, #C85) will see the new EFI VUTEk M3h X hybrid LED printer, new EFI VUTEk® FabriVU® 340 i8 eight-colour dye sublimation printer, the EFI VUTEk X5r roll-to-roll LED printer, and the EFI VUTEk Q3h XP seven-colour hybrid printer in action, each designed to help sign and display producers scale output, diversify applications, and drive more profitable growth.

C&S strengthens its governance to support its evolution

C&S announces the appointment of Marco Lucietti to its Board of Directors. With extensive international experience across the textile and denim industries, Lucietti will work alongside CEO Federico Corneli, contributing to the company’s managerial development, organizational structure and long-term strategic direction.

Industrial scale meets verified governance: RE&UP is now B Corp™ certified

RE&UP, the circular-tech transforming global textile waste into high-volume Next-Gen materials, has officially become a Certified B Corporation™. The milestone establishes the industrial recycler among a select group of manufacturing infrastructure providers verified as meeting B Lab Standards for social and environmental performance, transparency, and accountability.