[pageLogInLogOut]

#Composites

Freudenberg presents at JEC 2023 an extended range of solutions for the composites industry

Freudenberg´s EnkaChannel - Source: ©Freudenberg Performance Materials
Freudenberg Performance Materials (Freudenberg) will present surfacing veils and core materials for lightweight fiber reinforced plastic (FRP) parts at JEC in Paris, France. Freudenberg will also be showcasing Enka® Solutions flow media and spacers for efficient vacuum infusion, resin transfer and foam injection molding processes for applications in the composites industry, etc. at the international composites show. The leading global supplier of innovative technical textiles looks forward to welcoming visitors at the Baden-Württemberg International booth (booth Q71) in Hall 6 from April 25-27, 2023.

Freudenberg’s solutions for the FRP industry include a variety of glass, PAN and PET nonwovens, as well as core materials for the production of lightweight fiber reinforced plastic parts. These products are designed for anti-corrosion coatings in piping and tank construction, smooth UV resistant surfaces for facade panels, and other applications for a diverse range of end products. Products made from fiber reinforced plastics must be equipped with surfacing veils to provide abrasion resistance, corrosion resistance, smooth surfaces and mechanical strength. Freudenberg offers high-tech nonwovens that can meet these challenges.

EnkaSpacer - Source: ©Freudenberg Performance Materials
EnkaSpacer - Source: ©Freudenberg Performance Materials


Enka® Solutions additions to portfolio

Enka® Solutions products are characterized by their typical 3D entangled polymeric filament structures. Thanks to this unique structure, they are exceptionally suitable as flow media and spacers when producing composite materials. Readily available solutions for VARTM, SRIM and foam molding processes ensure the high performance of small- and large-scale complex fiber reinforced plastic parts at low cost and in one pass.



Enka® Solutions flow media enable high-speed and reliable resin or foam flows throughout the composite part. Applied as a spacer in foam injection molding processes, they push the reinforcement matting and the composite skin against the mold and hold them in place during the process, allowing for a full wetting out of glass fiber and skin.

Application of Freudenberg surfacing veils - FRP - Source: ©Freudenberg Performance Materials
Application of Freudenberg surfacing veils - FRP - Source: ©Freudenberg Performance Materials


Enka® Solutions has been part of Freudenberg Performance Materials since 2020.


More News from Freudenberg Group

#Techtextil 2026

Freudenberg Performance Materials presents Mehlerheytex and Filc at Techtextil 2026

Freudenberg Performance Materials will showcase textile innovations that increase efficiency, performance and sustainability in industry and mobility at Techtextil 2026. For the first time since the merger of Mehler Texnologies and Heytex, the MehlerHeytex brand will make its debut as a leading expert in coated technical textiles. Moreover, Freudenberg Performance Materials Filc (Filc), specialist for advanced needlepunch nonwovens and laminated materials, will present its groundbreaking solutions for automotive applications. Filc customers can benefit from the perfect combination of functionality, comfort and sustainability. The Freudenberg Performance Materials experts are looking forward to welcoming visitors to the trade fair at Stand A11 in Hall 11.0 from April 21 – 24, 2026.

#Nonwovens

Freudenberg accelerates local production for apparel market by expanding its site in India

Freudenberg Performance Materials Apparel (Freudenberg Apparel) celebrates the grand opening of a major expansion at its manufacturing facility in Chennai, India, on October 14, adding 20,000 square feet of production space and introducing new production lines tailored to the Indian apparel market. This strategic investment is aimed at significantly reducing lead times and enhancing the availability of high-quality, locally produced interlinings for the fast-evolving apparel sector in India and South Asia.

#Nonwovens

Freudenberg Performance Materials publishes first Sustainability Report

With the publication of its first sustainability report, Freudenberg Performance Materials has reached a major milestone on its path toward greater environmental responsibility and corporate transparency. Until now, information about the company’s sustainability performance was only included in the sustainability report of its parent company, the Freudenberg Group. The newly released report, however, focuses specifically on the business of technical textiles.

#Nonwovens

Freudenberg to exhibit for the first time at CAMX 2025

Freudenberg Performance Materials (Freudenberg) will be exhibiting for the first time at CAMX 2025 in Orlando, Florida, from September 9-11. This presence is a strong signal from the leading global supplier of technical textiles to support the North American composites industry with high-performance surfacing veils, flow media and spacers. Visitors can meet Freudenberg experts at booth D69 on the show floor.

More News on Composites

#Composites

Fewer pores, greater impact tolerance: Peter Dornier Foundation Prize 2026 honours material research on fibre-reinforced composite components for aerospace industry

Microscopically small pores that form during manufacture, or barely visible impact damage, can severely impair the load-bearing capacity and service life of fibre-reinforced composite components. Two young researchers have presented groundbreaking work in this field and will both be awarded the 2026 Peter Dornier Foundation Prize: Dr.-Ing. Benedikt Neitzel from the Technical University of Ilmenau for his doctoral thesis on pore minimisation in the RTM process, and Johanna Buschmann, M.Sc., for her master’s thesis, completed at the German Aerospace Centre, on the improved impact tolerance of 3D fabrics compared to 2D laminates.

#Composites

Carbon Revolution wins Composites Australia Engineering Team Excellence Award

Carbon Revolution has won the Engineering Team Excellence Award at the 2026 Composites Australia Annual Industry Awards.

#Composites

JEC Forum Southeast Asia 2026 highlights Taiwan as a strategic hub for the global composites industry

The third edition of JEC Forum organized in Southeast Asia brought together 350+ participants from 22 countries for three active days of high-level Business Meetings, conferences, and networking, emphasizing Southeast Asia’s growing role in the global composites market. Held for the first time in Taipei from 23 to 24 June 2026, following the successful first editions in Bangkok, JEC Forum Southeast Asia 2026 confirmed its position as the region’s leading business platform dedicated to the composites industry.

#Composites

MEL Composites supports ELA Aviation with advanced composite materials

MEL Composites is supplying advanced composite materials and process consumables to ELA Aviation for the production of its next-generation gyroplanes. The collaboration underlines MEL Composites’ growing role in advanced aerospace mobility, providing lightweight materials designed to improve aircraft performance, manufacturing efficiency and structural reliability.

Latest News

#Recycling / Circular Economy

Recover™ showcases textile recycling to European ambassadors in Bangladesh

Representatives of the European Union, the Netherlands and Spain have visited Recover™’s textile recycling facility in Bangladesh to discuss the implications of upcoming EU textile regulations and the role of textile-to-textile recycling in future supply chains.

#Dyeing, Drying, Finishing

Contactless measurement of coating for Technical Textiles with PLEVA AF 310 and AF 120

Textiles used for protection and defense must perform reliably – whether they are protective garments, tents, tarpaulins, covers, or technical carrier materials. Properties such as flame resistance, water repellency, weather resistance, or defined air permeability are often only achieved through precise coating, finishing, or printing processes.

#Knitting & Hosiery

Significantly greater versatility and productivity with the HKS 4-S EL from KARL MAYER

With the new HKS 4-S EL, KARL MAYER is introducing an innovation to the market that impresses in two ways: with outstanding speed and maximum flexibility.

#Dyeing, Drying, Finishing

EFI Reggiani and Danitech Group announce strategic multi-year agreement for Mezzera textile finishing machinery

Electronics For Imaging, Inc. (EFI), through its subsidiary EFI Reggiani (Reggiani Macchine S.p.A.), together with Danitech Engineering and Solutions Srl (Italy) and Suzhou Danitech Intelligent Technology Co. Ltd (China), announces a multi-year license and manufacturing agreement covering the Mezzera and Jaeggli textile finishing machinery portfolio.

TOP