[pageLogInLogOut]

#Spinning

Rieter demonstrates resilience in the challenging first half of 2025

In the first half of 2025, Rieter recorded an order intake of CHF 355.4 million (first half of 2024: CHF 403.4 million). This corresponds to a decline of around 12% compared to the same period last year. The expected broader market recovery has led to shifts in investment decisions on the part of customers due to the global trade disputes (particularly US punitive tariffs) and the geopolitical uncertainty.

As already announced in March 2025, the first half of 2025 presented a challenge in terms of revenue volume, but still largely met expectations due to the low order backlog. Revenue amounted to CHF 336.2 million, down 20% on the previous year’s period (first half of 2024: CHF 421.0 million).

[P class="klein":Order intake

The Machines & Systems Division posted an order intake of CHF 166.9 million (first half of 2024: CHF 211.5 million). Although Machines & Systems recorded an increase in demand, the closing of orders was significantly impaired by uncertainty surrounding customs tariffs and the geopolitical and economic situation.

The Components Division generated an order intake of CHF 95.7 million (first half of 2024: CHF 117.6 million) and is suffering under lower demand for components for new machines, primarily as a result of the cautious investment activity in the market.

The After Sales Division recorded a gratifying 25% increase in its order intake to CHF 92.8 million (first half of 2024: CHF 74.3 million). This positive development confirms the strategic growth initiatives that have been initiated. Incoming orders are benefiting from increased sales activities in the target markets, such as Central Asia and China, as well as from the ongoing expansion of the service and repair network.

Sales

The Machines & Systems Division posted sales of CHF 144.0 million (first half of 2024: CHF 198.7 million), which corresponds to a decline of around 28%. At the same time, uncertainties surrounding market developments led to project delays for individual customers, which had a negative impact on the order intake and sales.

In the Components Division, revenue fell by 10% year on year to CHF 113.9 million (first half of 2024: CHF 126.5 million). Sales in the business units focusing on new machines remained below the previous year’s period, while the business areas focusing on consumables or man-made fibers were more stable.

The After Sales Division posted sales of CHF 78.3 million (first half of 2024: CHF 95.8 million). While business involving upgrades and repairs (Engineered Solutions) developed in a positive manner, the weaker sales performance of Machines & Systems led to lower revenue generated through the installation of new systems.

Order backlog

As at June 30, 2025, the company had an order backlog of around CHF 510 million (first half of 2024: CHF 640 million).

Non-recurring items, EBIT, net profit, free cash flow

The reporting period was affected by non-recurring effects from the planned acquisition of Barmag and restructuring costs in the amount of CHF 14.6 million.

Despite the decline in sales, Rieter achieved an operating result (before restructuring and transaction costs) of CHF -2.7 million.

Due to existing capacities and the fixed cost structure, revenue in the first half of 2025 was below the operational break-even point. Rieter continues to assume that sales will be significantly higher than the current level in a normalized market environment.

Rieter was again able to save a substantial amount of overhead costs. These amounted to around CHF 104.9 million in the first half of 2025 (first half of 2024: CHF 119.8 million). The figures demonstrate that the defined cost-saving measures were consistently implemented.

In the first half of 2025, the aforementioned effects resulted in a loss of CHF 17.3 million at EBIT level (first half of 2024: CHF 10.0 million).

Rieter closed the first half of 2025 with a net loss of CHF 20.0 million (first half of 2024: CHF 1.7 million). This decline is attributable to the lower sales volume achieved in the first half of 2025.

The free cash flow in the first half of 2025 amounted to CHF -36.7 million (first half of 2024: CHF -1.1 million). This was attributable to the losses at net profit level and the increase in inventories of finished goods that have not yet been retrieved by customers due to the overall macroeconomic situation.

Extraordinary General Meeting of Rieter Holding Ltd.

result in any outflow of funds. Subject to regulatory approval, the acquisition of the Barmag Division is expected to be completed by the end of the 2025 financial year.

The invitation to the Extraordinary General Meeting, including the agenda and the Board of Directors’ proposals, is expected to be sent to the shareholders on Monday, August 25, 2025, and will be published in the Swiss Official Gazette of Commerce as well as on the Rieter website.

Outlook for the full year 2025 adjusted

The Rieter Group expects a stronger second half of the year for the 2025 fiscal year, though this depends on a continued market recovery. As the market recovery has slowed due to macroeconomic uncertainties, Rieter is adjusting its sales forecast for 2025 as a whole. The company (without consideration of the Barmag Division) now expects sales of around CHF 750 to 800 million (previously: at the prior year’s level of around CHF 860 million).

Excluding restructuring costs and costs associated with the acquisition of Barmag, Rieter expects an operating EBIT margin at the lower end of the range of 0% to 4% for 2025 as a whole.

On Thursday, September 18, 2025, an Extraordinary General Meeting of Rieter Holding Ltd. is taking place to vote on the planned capital increases as part of the rights issue and the private placement to finance the acquisition of the Barmag Division, as well as on the reintroduction of the capital band that lapses by law as a result of the planned capital increases. Rieter’s largest shareholders, Peter Spuhler (around 33% shareholding) and Martin Haefner (around 10% shareholding) continue to support the planned capital increases and committed to participating in the rights issue pro-rata by exercising their subscription rights as well as investing additional capital through private placement. In addition, a capital reduction by means of a nominal value reduction is to be voted on, whereby the relevant reduction amount is to be allocated to the legal reserves from capital contributions and will therefore not result in any outflow of funds. Subject to regulatory approval, the acquisition of the Barmag Division is expected to be completed by the end of the 2025 financial year.

The invitation to the Extraordinary General Meeting, including the agenda and the Board of Directors’ proposals, is expected to be sent to the shareholders on Monday, August 25, 2025, and will be published in the Swiss Official Gazette of Commerce as well as on the Rieter website.

Outlook for the full year 2025 adjusted

The Rieter Group expects a stronger second half of the year for the 2025 fiscal year, though this depends on a continued market recovery. As the market recovery has slowed due to macroeconomic uncertainties, Rieter is adjusting its sales forecast for 2025 as a whole. The company (without consideration of the Barmag Division) now expects sales of around CHF 750 to 800 million (previously: at the prior year’s level of around CHF 860 million).

Excluding restructuring costs and costs associated with the acquisition of Barmag, Rieter expects an operating EBIT margin at the lower end of the range of 0% to 4% for 2025 as a whole.



More News from Rieter Textile Systems

#Spinning

Rieter Annual General Meeting 2026: Shareholders approve all board proposals

At the Annual General Meeting of Rieter Holding Ltd. held on April 16, 2026, 342 shareholders representing 64.0% of the share capital approved all motions proposed by the Board of Directors. The shareholders adopted the Annual Report as well as the Financial Statements and Consolidated Financial Statements for 2025. They also granted discharge to the members of the Board of Directors and the Group Executive Committee for their activities in the reporting year. In an advisory vote, the 2025 Report on Non-Financial Matters was also approved.

#Spinning

Rieter advances strategic repositioning amid market volatility

Rieter successfully completed the acquisition of Barmag on February 2, 2026, and reached an important milestone in the company’s repositioning. Barmag will be integrated into the Rieter Group as the “Man-Made Fiber” Division. With this strategically transformative acquisition, Rieter is expanding its core business beyond the short-staple fiber business in a targeted way. This positions Rieter as the global market leader along the entire value chain for natural and man-made fibers. In addition, as a complete systems supplier, Rieter is further strengthening its technological leadership in the areas of automation and digitization.

#Spinning

Rieter responds to higher raw material prices

Global political and economic developments have been leading to rising raw material and energy costs for some time. The textile machinery industry is also affected by this trend. Rieter machines and components consist to a large extent of steel, copper, aluminum and electronics. These materials in particular have seen higher demand and higher prices in recent months.

#Spinning

Rieter completes acquisition of Barmag

Rieter has successfully completed the acquisition of Barmag as of February 2, 2026. This strategically important acquisition makes Rieter the world’s leading system provider for natural and synthetic fibers.

More News on Spinning

#Techtextil 2026

SAHM Winding Solutions and Vandewiele Automation present integrated automation solution for winding processes

For the first time at the Techtextil trade fair in Frankfurt am Main, Germany (21 - 26 April), SAHM Winding Solutions (Hallo 12.0. / Booth 95) and Vandewiele Automation will be showcasing their combined automation expertise for industrial winding processes. Under the motto “Combining Automation. Maximizing Flow”, the two companies will demonstrate how automated package handling and robot-assisted yarn knotting can be integrated into a continuous production flow.

#Spinning

Graf at EXINTEX – Strengthening presence in Latin America

Graf successfully participated in EXINTEX, one of the leading textile exhibitions in Latin America, together with its local agent Eurotecnica. The exhibition provided an excellent platform to engage with customers, partners and industry experts across the region.

#Spinning

Temco launches a new DTY all-in-one solution

Temco introduces the DTY All-in-One Solution – a fully harmonized set of components engineered to give customers a highly stable, low maintenance and reproducible process environment. The solution reduces interruptions, extends component lifetimes and supports consistent yarn quality across all machine positions. All-in-One Solution – a fully harmonized set of components engineered to provide maintenance and reproducible process environment.

#Techtextil 2026

DIENES at Techtextil 2026: Flexible pilot lines for bio-based fiber development

The growing relevance of bio-based materials in technical textiles is accompanied by increasing demands for reproducibility, high-quality data, and scalable process routes. Especially when working with cellulose and its derivatives, chitosan, lignin-based approaches, or bio-based PAN as a carbon-fiber precursor, R&D teams face variable feedstock quality, tighter process windows, and the need for reliable comparability across trials. This calls for flexible, data-driven experimental setups that can be reconfigured efficiently when recipes, solvents, and raw-material batches change.

Latest News

#Texprocess 2026

Kornit Digital expands digital production into footwear and technical textiles with Presto MAX PLUS

Kornit Digital (NASDAQ: KRNT) (“Kornit” or the “Company”), a global pioneer in sustainable, on-demand digital fashion and textile production, today unveiled the Kornit Presto MAX PLUS, a new roll-to-roll system expanding digital manufacturing into footwear, automotive interiors, military camouflage, high-performance sportswear, and high-end furnishings. Debuting at Texprocess 2026 in Frankfurt, Presto MAX PLUS enables entirely new applications for on-demand textile production.

#Textile processing

NATULON® zipper series surpasses 50% of YKK’s global zipper sales

YKK Corporation (Headquarters: Chiyoda-ku, Tokyo; President: Koichi Matsushima; hereafter, YKK) announces that the global sales share of its NATULON® zipper series—zippers that incorporate recycled materials—has exceeded 50%.

#Smart Textiles

Covestro, FILK Freiberg, and OUT e.V. develop flexible, conductive polymer smart textile system

As the smart textiles market continues to grow across healthcare, personal protection, sportswear, and automotive applications, developers are seeking new ways to integrate electronic functionality directly into textiles, without the rigidity and complexity of conventional wiring. To address this challenge, FILK Freiberg Institute, an independent research institution with expertise in polymer coatings for textile applications, collaborated with Optotransmitter-Umweltschutz-Technologie (OUT) e.V. The joint project, funded under the German Industrielle Gemeinschaftsforschung (IGF) program of the Bundesministerium für Wirtschaft und Energie (BMWE), focused on developing flexible, conductive polymer surfaces for next-generation smart textiles.

#HIGHTEX 2026

Global growth in the technical textile sector drives interest in HIGHTEX 2026 to its peak

The continued steady growth of the technical textiles and nonwoven sector worldwide is increasing interest every year in the HIGHTEX Exhibition, one of the sector’s most important meeting points. In this strong growth climate, HIGHTEX 2026 International Technical Textiles and Nonwoven Exhibition, which will bring together the sector’s leading manufacturers, technology providers, and international buyers, is preparing to open its doors at Tüyap Fair and Congress Center on June 9–13, 2026.

TOP