[pageLogInLogOut]
USTER Think Quality

#Spinning

Rieter reports higher sales and order intake but lowers 2026 earnings outlook

Rieter’s ROBOspin system automates piecing operations on ring spinning machines, helping spinning mills improve productivity and reduce manual intervention. © 2026 Rieter
Rieter achieved an order intake of CHF 951.4 million in the first nine months of 2026 (2025: CHF 559.3 million), up 70.1%. This growth is attributable to the first-time consolidation of the Man-Made Fiber Division. On an organic basis, order intake was 10.5% lower than the previous year.

Sales amounted to CHF 898.6 million after nine months (2025: CHF 457.7 million), up 96.3%. This development was also largely driven by the first-time consolidation of the Man-Made Fiber Division. On an organic basis, sales were 2.1% lower than the previous year.

Rieter completed the acquisition of Barmag on February 2, 2026. The reporting period for the Man-Made Fiber Division therefore covers eight months.

Outlook for the full year 2026 adjusted

For the 2026 financial year, Rieter expects sales at the lower end of the previously communicated range of CHF 1.3 to CHF 1.5 billion.

Due to the continued margin pressure and the slower-than-expected market recovery in the region Europe, Middle East and Africa as well as in the Americas, Rieter now expects an operational EBIT margin of -2% to 0%.

Market development

The markets developed very differently regionally. China and India showed comparatively stronger investment activity, while no sustainable recovery was evident in the region Europe, Middle East and Africa as well as in the Americas.

The regional sales development is also significantly influenced by the consolidation of the Man-Made Fiber Division. China achieved sales growth of 279.3%, of which 231.3% was attributable to the M&A impact. Organic growth amounted to 50.6%. Sales in India increased by 68.3%. The M&A impact amounted to 71.8% and the currency effect was -8.3%, resulting in organic growth of 4.8%.

In the Europe, Middle East and Africa region, sales fell by 9.3%. Despite a positive M&A impact of 28.6%, organic development was -36.4%. Sales in the Americas fell by 32.9%. Organically, the decline was 51.1%, while the positive M&A impact was 20.9%.

Order intake

The order intake of the Short-Staple Fiber Division amounted to CHF 335.8 million after nine months, which is 19.4% below the previous year’s figure. On an organic basis, the decline was 15.6%. The Components & Technology Division achieved an order intake of CHF 146.5 million. This corresponds to an increase of 2.7% or organic growth of 4.4%. The Man-Made Fiber Division, which has been consolidated since February 2026, contributed CHF 469.1 million to the Group’s order intake.

Sales

The Short-Staple Fiber Division achieved sales of CHF 301.6 million (2025: CHF 303.1 million). This corresponds to a decrease of 0.5%. On an organic basis, sales were 2.7% above the previous year. The Components & Technology Division achieved sales of CHF 134.7 million (2025: CHF 154.6), representing a decline of 12.9%, or 11.4% on an organic basis. The Man-Made Fiber Division contributed CHF 462.3 million to Group sales.

Order backlog

As at September 30, 2026, the Rieter Group had an order backlog of approximately CHF 850 million (2025: CHF 590 million). The current order backlog also includes the Man-Made Fiber Division, which has been consolidated since February 2026.

Restructuring programs

Rieter is continuing to implement its ongoing restructuring and footprint measures.

In the Short-Staple Fiber Division, these include, among others, the planned relocation of parts of the winding machine production from Germany to China, as well as further adjustments to the production and cost structures.

The Components & Technology Division is advancing the creation of competitive cost structures through the closure of sites in Europe.

In the Man-Made Fiber Division, measures to realign the Remscheid and Neumünster sites in Germany were announced in October 2026.



More News from Rieter Textile Systems

#Spinning

Georg Stausberg, a veteran of the textile machinery industry, takes over as Rieter Group CEO

Georg Stausberg, one of the most experienced executives in the international textile machinery industry, has been appointed Chief Executive Officer of the Rieter Group with immediate effect from 4 November 2026. With more than three decades of industry experience and a long-standing leadership career at Barmag, Stausberg brings extensive technological expertise, international market knowledge and an established network across the global textile industry to his new position.

#Spinning

Rieter appoints Daniel Lippuner as new CEO as Thomas Oetterli steps down

Thomas Oetterli has decided to step down from his function as CEO, effective October 31, 2026, and hand over the Chairmanship of the Board of Directors. “After the successful implementation of the Next Level performance program, the structural measures initiated to consolidate the sites and the acquisition of Barmag, the time has come to hand over responsibility to new hands,” explains Thomas Oetterli.

#Spinning

Rieter prepares leadership transition in Components & Technology

Roger Albrecht, Head of the “Components & Technology” Division, has decided to pursue a new opportunity outside the Rieter Group. Roger has worked for the Group for 11 years and has been instrumental in maintaining Rieter’s position as a technology leader in the short-staple business.

#Recycling / Circular Economy

Rieter and partners launch Recycling Powerhouse for industrial-scale textile recycling

Recycling Powerhouse Ltd. was established in July 2026 to industrialize, standardize and scale textile recycling. Based in Switzerland, the venture will operate a franchise-driven business model that enables the production of high-quality, certified recycled yarns. The project is supported by the following partners: Rieter Group, the world’s leading system supplier for natural and man-made fibers, Säntis Textiles, a Swiss textile engineering company, and Valvan, a Belgian sorting technology company. The first blueprint franchise operation is scheduled to launch early 2027 in partnership with Suhail Industrial Holding Group in Qatar.

More News on Spinning

#ITMA Asia + CITME 2026

Murata Machinery to showcase AIcone winding and high-speed VORTEX spinning at ITMA ASIA 2026

Japanese textile machinery manufacturer Murata Machinery will present its PROCESS CONER AIcone automatic winder and VORTEX 870 EX spinning machine at ITMA ASIA + CITME 2026. Under the theme “Right Choice, Bright Future”, the company will highlight technologies for efficient yarn manufacturing, combining energy-saving winding solutions with high-speed air-jet spinning. Visitors can meet Murata Machinery in Hall 5, Booths E01 and E02.

#Spinning

Barmag’s single-stage Bi-Shrinkage concept impresses with yarn quality and efficiency

The Indian company Garden Silk Mills Pvt. Ltd. adopts Barmag's new single-stage Bi-Shrinkage Yarn (BSY) spinning concept based on WINGS FDY PLUS eco. The systems, which have been in operation for about a year, deliver excellent yarn quality with very good productivity.

#India ITME 2026

Trützschler brings intelligent fiber processing and automation to India ITME 2026

From December 4 to 9, 2026, the Trützschler Group will present its latest innovations in spinning, card clothing and nonwovens at India ITME in Greater Noida, India. At Hall 11, Booth B15, visitors can discover solutions designed to increase productivity, reduce operating costs and ensure consistently high product quality. Key highlights include the intelligent card TC 26i, the 12-head comber TCO 21XL, innovative card clothing solutions for improved fiber utilization and quality, as well as advanced nonwovens technologies for hygiene, wipes and technical applications.

Latest News

#Nonwovens

Freudenberg Performance Materials brings interlining production to Vietnam for faster regional supply

Freudenberg Performance Materials Apparel (Freudenberg Apparel) has expanded its manufacturing capabilities in Vietnam with local apparel interlining production at its factory in Long Thanh, Dong Nai. Apparel brands and manufacturers in Southeast Asia can now source both interlinings and comfortemp® thermal insulation from Vietnam, benefiting from shorter lead times, improved supply responsiveness, and consistent quality standards across Freudenberg Apparel’s regional manufacturing network.

#EU Textile Strategy

EURATEX and Egyptian industry groups sign textile cooperation agreement

The European Apparel and Textile Confederation (EURATEX) has signed a memorandum of understanding with the Apparel Export Council of Egypt (AEC), the Textile Export Council of Egypt (TEC) and the Egyptian Exporters Association (EXPOLINK). The agreement sets out plans to help Egyptian manufacturers prepare for EU sustainability requirements, promote investment and strengthen ties between European and Egyptian textile and clothing companies.

#Textile processing

YKK Bangladesh celebrates 25 years of fastening production and business development

YKK Bangladesh Pte. Ltd., a subsidiary of Japanese fastening manufacturer YKK Corporation, has celebrated its 25th anniversary with a commemorative ceremony in Dhaka on November 8, 2026. Since its establishment in November 2000, the company has expanded its manufacturing capacity and business operations alongside the growth of Bangladesh's apparel industry.

#ITMA Asia + CITME 2026

DORNIER highlights airbag, filtration and composite weaving technologies at ITMA ASIA 2026

Lindauer DORNIER will present its latest developments in air-jet and rapier weaving technology for technical textiles at ITMA ASIA + CITME 2026. The German machinery manufacturer will focus on the reliable and efficient production of airbag fabrics, high-density filters and reinforcement textiles for fibre-reinforced composites. Alongside its A2 air-jet and P2 rapier weaving machines, DORNIER will highlight its TRITOS FLEX technology for complex 3D composite preforms, retrofit solutions and expanded service capabilities in Asia. The company will exhibit in Hall 3, Stand E02.

TOP