#Spinning

2022-07-07

Trützschler Group SE expands Board of Directors

The Trützschler Group SE has appointed Dr. Ulrich Schwenken and Heinrich Krull to its Board of Directors with effect from July 1, 2022. Dr. Schwenken will serve as Chief Executive Officer (CEO). Heinrich Krull will serve as Chief Operations Officer (COO).

Dr. Schwenken will assume responsibility for Development, Digitalization, IT and Corporate Communications. As a doctoral graduate specialized in engineering, he has many years of experience in automotive and mechanical applications. Since 2008, he has held various management positions in the areas of Service, Sales and Development at companies including Porsche AG and Volkswagen AG, where his responsibility covered a range of key topics such as digital transformation. Most recently, Dr. Schwenken served as CSO, CTO and CDO at Leistritz AG, and was responsible for the strategic focus on innovative growth areas.

Mr. Krull joined Trützschler Group SE in September 2020. As a graduate engineer for production engineering and management with international experience in mechanical and production site engineering, he has comprehensive expertise related to operations. He also has extensive experience of production technologies, including in-depth knowledge of Lean Management methods and expertise in post-merger integration. As COO, he will be responsible for the areas of Production, Purchasing and Logistics, Quality Assurance as well as Supply Chain.

“We are delighted to welcome Dr. Schwenken and Mr. Krull to the Board of Directors. Both will bring diverse expertise to strengthen the development of the company for future growth. We wish them great success in their new tasks,” says Dr. Roland Münch, Chairman of the Supervisory Board of Trützschler Group SE.

Until his scheduled retirement at the end of 2022, Dr. Dirk Burger will act as Co-CEO to Dr. Schwenken.

The responsibilities of the Board of Directors of Trützschler Group SE as of July 1, 2022 are as follows: Dr. Ulrich Schwenken (CEO) is responsible for Development, Digitalization, IT and Corporate Communications; Dr. Dirk Burger will take over the role of Co-CEO to Dr. Schwenken until the end of 2022; Dr. Ralf Napiwotzki (CFO) is responsible for Finance and Controlling, Human Resources, Legal and Compliance; Alexander Stampfer (CSO) is responsible for Sales, Marketing and Service; Heinrich Krull (COO) is responsible for Production, Purchasing and Logistics, Quality Assurance as well as Supply Chain.

The new members of the Board of Directors of Trützschler Group SE: Dr. Ulrich Schwenken, CEO Trützschler Group SE ...

... and Heinrich Krull, COO Trützschler Group SE (c) 2022 Trützschler Group

Trützschler’s latest spinning and card clothing innovations at CAITME 2026

From September 8 to 10, 2026, Trützschler will present its latest innovations in spinning and card clothing for state-of-the-art fiber processing at CAITME in Tashkent, Uzbekistan. Visitors are invited to meet the experts at Pavilion 2, Booth D50 and explore solutions designed to increase productivity, streamline processes, and ensure consistently high yarn quality. Key topics include the next-generation card TC 30i, the integrated draw frame IDF 3, the high-performance comber TCO 21XL as well as Trützschler Card Clothing’s new flat top series STEELTOP®.

Pre-Cleaner CL-X: Proven in cotton cleaning – creating value beyond the spinning mill

Since its market launch, the CL-X has firmly established itself in blowroom lines worldwide. Hundreds of installations confirm its ability to deliver superior cleaning efficiency, lower waste, higher productivity and significant energy savings. Now, new customer applications show that the CL-X not only continues to excel in spinning preparation – it is also entering a completely new field of application: ginning.

STEELTOP®: A new benchmark in flat tops for spinning preparation

Modern carding generations achieve higher production performance, placing significantly greater stress on flat tops. Higher cylinder speeds and increased fiber density, combined with tighter carding gaps, create more demanding operating conditions. At the same time, poorer raw material quality and the increased use of recycled materials further intensify these challenges. With STEELTOP®, Trützschler introduces a new full steel flat top series developed for these demanding modern carding processes.

Ibrahim Fibres and Trützschler: A strong partnership enters its next phase with the TC 30Si

For more than two decades, Ibrahim Fibres and Trützschler have grown side by side, driven by a shared ambition to continuously improve spinning performance, strengthen technology leadership and set new benchmarks in the textile industry. Today, Ibrahim Fibres is a leading yarn and polyester staple fiber manufacturer in Pakistan. The company operates the largest number of Trützschler cards in the country, with more than 200 machines running across its mills in Faisalabad, and plays an important role in one of Asia’s largest textile industries.

Barmag presents metering pump solutions at ASE China

From September 15 to 17, 2026, Barmag’s Pumps Division will present its solutions for the precise delivery and metering of adhesives, sealants, and other high-viscosity media at ASE China at the Shanghai New International Expo Centre. The focus of the exhibition will be on high-precision gear metering pumps that help plant managers sustainably optimize material usage, process stability, and product quality. (Booth E4235).

BICO BCF yarn delivers impressive performance in field testing

In a joint development project with other partners, Barmag and Object Carpet have successfully tested BICO BCF yarn in the carpet manufacturing process. The results show that this innovative yarn technology offers significant performance advantages and opens up new possibilities for recycling-oriented carpet constructions.

Première Vision Paris expands innovation focus across fashion and beauty

From September 1–3, 2026, Première Vision Paris will bring together more than 900 exhibitors from across the global fashion value chain. This year's edition places a strong emphasis on Innovation-Tech, highlighting technologies and materials that are reshaping product development, manufacturing and sustainability.

SHIMA SEIKI to exhibit at Première Vision Paris

Leading digital textile solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan will exhibit at Première Vision Paris in Paris, France next month. The company will exhibit in the "Smart Creation" area, dedicated to showcasing cutting-edge technologies that integrate sustainability and innovation. The knitting expert will be demonstrating solutions that optimize product development workflows and enhance sustainability through proposals in Digital Product Creation (DPC).

ICAC International Seminar in Taipei to explore strategic synergies across the textile supply chain

The International Cotton Advisory Committee (ICAC) — together with the Taiwan Textile Federation (TTF), under the guidance of the Ministry of Economic Affairs and the Ministry of Foreign Affairs of Taiwan — will bring international cotton and textile leaders together in Taipei on September 10 for the ICAC International Seminar 2026.