#Recycling / Circular Economy

2025-01-30

ANDRITZ acquires recycling technology specialist ATN Engineering

International technology group ANDRITZ has acquired ATN Engineering B.V., a Dutch company specializing in advanced recycling technologies. This strategic acquisition strengthens ANDRITZ’s position as a global leader in recycling solutions by adding ATN’s state-of-the-art degassing and de-oiling systems to its portfolio.

ATN Engineering is recognized as an innovator in the recycling sector with its unique drill head system, which enables the safe and efficient removal of hazardous oil and gas from end-of-life refrigerators. The company also supplies feeding logistics and equipment for the recycling of industrial coolers, air conditioning equipment, and heat pumps. ATN provides engineering, manufacturing, installation, commissioning and servicing of recycling equipment. To date, the company has delivered more than 200 degassing units worldwide.

Thomas Gemeiner, Vice President, Recycling at ANDRITZ © 2025 ANDRITZ

Thomas Gemeiner, Vice President, Recycling at ANDRITZ commented:

“This acquisition is another significant step forward for our recycling offering. By integrating ATN Engineering’s expertise and proprietary technology, we now cover all critical process steps in refrigerator recycling from a single source. This strengthens our leading position in the area and our ability to provide our customers with comprehensive turnkey solutions. We are very pleased to welcome the ATN team to our group.”

With this acquisition, ANDRITZ not only expands its technology portfolio but also underscores its commitment to advancing the circular economy through innovative, sustainable solutions. In addition to refrigerator recycling, the ANDRITZ Recycling team focuses on key growth areas such as e-scrap recycling, battery recycling, and waste-to-energy systems.

A Penteadora starts up ANDRITZ textile recycling and needlepunch nonwoven lines in Portugal

A Penteadora SA has successfully started up a complete mechanical textile recycling line and a needlepunch nonwoven line supplied by ANDRITZ at its production site in Unhais da Serra, Portugal. This investment enables A Penteadora to expand its industrial capabilities and develop a new generation of solutions based on pre- and post-consumer recycled textiles. The input materials originate from its own production waste and other textile waste streams. Both lines are fully operational, and the first products are expected to reach the market in July.

ATCO Hygienics, Uzbekistan, orders baby diaper production line from ANDRITZ

International technology group ANDRITZ has received an order from ATCO Hygienics to supply a new baby diaper production line for its plant in Tashkent, Uzbekistan. The order is included in ANDRITZ’s order intake for the first quarter of 2026. Commissioning of the production line is scheduled for the end of 2026.

Kruger, Canada, orders first nonwovens line for sustainable wipes from ANDRITZ

International technology group ANDRITZ has received an order from newly established Kruger Nonwovens to deliver a complete WetlaceTM hybrid line for the Wayagamack mill in Trois-Rivières, Quebec, Canada. With this investment, pulp and paper producer Kruger is preparing to enter the nonwovens market with a new generation of plastic-free, chemical-free materials for sustainable wipes. The line is the first of its kind in Canada and is scheduled to start production in 2028.

Reju expands textile-to-textile recycling network with six international fabric manufacturers

Reju, a textile-to-textile regeneration company, is expanding its industrial network through collaborations with six fabric manufacturers in Europe and the Americas. The initiative aims to accelerate the integration of regenerated polyester into textile manufacturing and support the development of finished fabrics for commercial applications.

Trützschler expands technical service capabilities for spinning mills in Pakistan

Faster support, shorter downtime and advanced repair capabilities: customers across Pakistan can now benefit from the Trützschler Service Station at its new location in Lahore. By combining Trützschler service expertise with state-of-the-art diagnostic equipment, the new facility helps spinning mills resolve technical issues more quickly and maintain reliable production.

Stäubli to introduce new S3292 dobby for high-speed weaving at ITME India 2026

Stäubli will introduce its new S3292 dobby at ITME India 2026, taking place from December 4 to 9 at the India Expo Centre & Mart in Greater Noida, Uttar Pradesh. Designed for high-speed air-jet weaving, the new machine will be among the highlights of the company's presentation, which also includes warp preparation systems, cam motions, Jacquard technologies and digital services.

DITF develops bio-based binding fibers for wood-fiber insulation materials

As part of the CelluWoodFlex project, the German Institutes of Textile- and Fiber-Research in Denkendorf (DITF) are developing bio-based cellulose ester fibers as alternative binding fibers for flexible wood fiber insulation materials. In addition to the spinning process and the production of suitable staple fibers, the institute is also investigating how wood and cellulose fibers can be separated and recycled at the end of their useful life.

Magnera highlights HighPleat™ filtration media technology at FiltXPO 2026

At FiltXPO 2026, held on October 28–29 at the Minneapolis Convention Center in Minneapolis, Minnesota, Magnera highlighted advances in air filtration media architecture, with a particular focus on its HighPleat™ platform for MERV 8–10 applications. The technology combines a lofted fiber structure with optimized pore architecture to address the challenge of balancing filtration efficiency, airflow resistance and contaminant-holding capacity.

Ahlstrom expands depth filtration media production capacity at US facility

Ahlstrom has completed a major investment in its Kingston manufacturing facility in New York, USA, expanding production capacity for high-performance depth filtration media. The modernization of Line 3 is designed to improve manufacturing efficiency, enhance quality control and increase flexibility in producing different product widths.