[pageLogInLogOut]

#Raw Materials

Organic Content Standard policy update

© 2022 Textile Exchange
Textile Exchange is making a policy change to the Organic Content Standard

Textile Exchange has been committed to supporting the integrity of preferred fibers and materials, and in particular, organic cotton, since our inception in 2002. 

As of December 1, 2022, OCS will mandatorily require that site inputs from Global Organic Textile Standard (GOTS), provide traceability of all transaction certificate data back to the original farm source (e.g. full transaction certificate data including product and input product) and farm input data (e.g. farm capacity).

Additionally, in order to decisively prevent fraud and to provide a double safety net, all first processors (e.g. cotton gins) that ultimately provide GOTS inputs into an OCS product down the supply chain shall be certified to the OCS and provide evidence of all inputs from farms.

The additional data is being requested of certification bodies and standards users. This may require certification bodies to change contracts, policies, and technology systems to make this possible. While we can require our own certification bodies to supply this data, we cannot extend this requirement to certification bodies operating in other schemes.



To minimize business disruptions and resolve possible data sharing concerns, we recommend that all sites not currently certified to OCS begin the necessary steps to become OCS certified to ensure that data may be clearly shared through their certification bodies with Textile Exchange. To facilitate this (and the requirement for first processors to become OCS certified), through June 30, 2023, Textile Exchange is waiving OCS certification fees for any site that is currently GOTS certified and decides to add OCS certification (this is not applicable if site already has OCS & GOTS certificates). Further, Textile Exchange is permitting certification bodies to issue OCS scope certificates without conducting audits of sites holding valid GOTS certificates with the same validity through June 30, 2023. Combined GOTS and OCS audits would then occur simultaneously with the GOTS renewal timing. In all these cases where an OCS scope certificate is issued through June 30, 2023, the validity date shall be the same as the GOTS scope certificate.

This policy change occurs in ASR-106 Accepted Equivalent Standards Policy and contributes to our continued efforts to strengthen integrity in organic cotton. The additional data sharing will enable Textile Exchange to have full traceability of the inputs to the OCS and allow us to perform more robust volume reconciliation in coordination with GOTS. This will also allow us to provide more robust traceability information with standards users as systems like TrackIt come online.


More News from TEXDATA International

#ITM 2026

ITM 2026: The new geography of textile production

New production hubs are emerging across North Africa and Central Asia, while Türkiye is accelerating its transformation toward higher-value, technology-driven and more sustainable textile manufacturing.

#Research & Development

“Production is a product”

From technical textiles and AI-driven robotics to the limitations of textile circularity: Professor Dr Thomas Gries looks back on more than two decades of development at ITA Aachen. In the interview, he explains why production technology remains a decisive success factor, discusses international collaborations and innovation ecosystems, and shares his views on the transformation of production landscapes and the challenges facing an increasingly regulated industry.

#Knitting & Hosiery

“We need to move away from the price trap and return to a value-driven mindset.”

With its new Textile Innovation Center, KARL MAYER is sending a strong signal for innovation, collaboration, and the future of textile applications. In this interview, Karl Josef Mayer discusses new opportunities in warp knitting, the processing of staple fibres, recycling, the changing role of machinery manufacturers, and why the textile industry must once again focus more strongly on the value of textiles. by Oliver Schmidt

#Associations

“Innovation, resilience and international experience remain the great strengths of the Swiss textile machinery industry”

Geopolitical uncertainty, growing competitive pressure from China, new free trade agreements and the shift towards a circular economy are currently reshaping the global textile industry. In this interview, Cornelia Buchwalder discusses the current mood within the Swiss textile machinery sector, the industry’s distinctive innovative strength, new market opportunities in India and Asia, and the technological trends that could shape the upcoming trade fair cycle leading up to ITMA 2027.

More News on Raw Materials

#Raw Materials

CSITC adds ABRAPA as a round trial sample provider

Beginning with the Q2 2026 Round Trials, the ICAC's Committee on the Commercial Standardization of Instrument Testing of Cotton has expanded its sample provision framework by adding the Brazilian Cotton Growers Association (ABRAPA) as an official sample provider.

#Raw Materials

Dr N Vigneshwaran is named 2026 ICAC Researcher of the Year

The International Cotton Advisory Committee (ICAC) is pleased to announce the selection of Dr N Vigneshwaran, Principal Scientist and Head of the Chemical and Biochemical Processing Division at the ICAR–Central Institute for Research on Cotton Technology (ICAR-CIRCOT), Mumbai, India, as the ICAC Researcher of the Year 2026.

#Raw Materials

Global Cotton area and production are projected to decline in the 2026/27 Season

The June 2026 issue of Cotton This Month projects a modest contraction in global cotton area, production, and trade during the 2026/27 season, reflecting weaker demand sentiment, rising production costs, and shifting environmental factors across major producing nations.

#Raw Materials

New U.S. cotton study uses real-world grower data to reveal where fiber impacts occur

Cotton Incorporated has released a critically reviewed life cycle assessment (LCA) of U.S. cotton fiber production that examines how cotton’s environmental impacts are measured and where meaningful improvements can be made across the value chain. The new data, grounded in real‑world grower inputs, measures what drives U.S. cotton’s environmental footprint from field to gin.

Latest News

#Spinning

Barmag and Hitech Automation enter into partnership for an auto-doff system for texturing machines

Barmag (Suzhou) Technology Co., Ltd. and Hitech Automation Solutions PVT LTD. of Surat, India, have agreed to an exclusive partnership to jointly market Hitech’s Doffmatic automation solution for Barmag’s proven manual eFK texturing machines. In many texturing facilities, manual doffing processes remain heavily operator-dependent – resulting in issues such as increased scrap, inconsistent quality, and limited productivity.

#ITM 2026

Uster’s new Recycling Opening Index guides spinners to the perfect blend

Uster AFIS 6 now offers the key data for better decisions when blending recycled fibers. Process control is decisive in determining the quality and economic outcome. The new R Recycling Module of AFIS 6 introduces the Recycling Opening Index (ROI), so spinners can optimize their circularity credentials. It was officially launched at ITM 2026 in Istanbul, Türkiye.

#HIGHTEX 2026

The heart of the technical textiles and nonwovens world will beat in Istanbul

Only 1 day remains until HIGHTEX 2026 International Technical Textiles and Nonwovens Exhibition opens its doors. Bringing together manufacturers, technology developers, investors, and industry professionals from around the world, HIGHTEX 2026 is preparing to showcase the innovations shaping the future of the industry. As the countdown to this major event continues, Istanbul is once again getting ready to become the meeting point of the global technical textiles industry.

#Man-Made Fibers

Grasim Industries announces fresh investment of ₹3094 Crore to expand Lyocell capacity

Grasim Industries Limited, the flagship company of the Aditya Birla Group and a global leader in cellulosic fibres, today announced an investment of ₹3,094 crore, for Phase II Lyocell capacity of 110K TPA at Harihar, Karnataka. This expansion will consist of 2 lines of 55K TPA (150 Tons per day) each. The first line is expected to be commissioned by 2028, and the second line is expected to be commissioned by 2030.

TOP