[pageLogInLogOut]

#Nonwovens / Technical Textiles

Lenzing Nonwovens expands its LENZING™ Lyocell Dry fiber portfolio to offer cellulosic solutions for a wider range of applications

Lenzing Nonwovens, a leading supplier of regenerated cellulose fibers, is proud to announce the expansion of its LENZING™ Lyocell Dry fiber portfolio with two new cellulosic fibers – a fine dry fiber that delivers strength and softness and a coarse dry fiber which provides enhanced liquid and air flow. These two innovative products enable customers to confidently broaden their use of LENZING™’s wood-based[1] and biodegradable[2] fibers into a wider range of applications while maintaining exceptional performance.


All LENZING™ Lyocell Dry fibers within the family (standard, fine, and coarse) have hydrophobic properties3 which ensure efficient liquid management suitable for extensive nonwoven applications.

The new LENZING™ Lyocell Dry fine fiber can produce nonwoven fabrics with higher density compared to LENZING™ Lyocell Dry standard fiber. With up to 30% more cellulosic fibers in the same space, customers can create strong and soft nonwoven products. These fibers are suitable for use in hygiene applications such as diapers or sanitary pads.

The new LENZING™ Lyocell Dry coarse fiber creates fabrics that are more open due to its extended fiber diameter, and thus increasing the pore sizes between the fibers in the fabric. This allows for more air or liquid to flow through the material. It is particularly suitable for the acquisition and distribution layer in hygiene products and is also being explored for industrial filtration applications.

Monique Buch, Executive Vice President Nonwoven at Lenzing AG said, “By offering a diverse range of hydrophobic cellulosic fibers from fine to coarse, which are not plastic according to the EU’s Single-Use Plastics Directive (SUPD), our customers can use alternative fibers for a wider range of applications whilst delivering superior performance.”

Lenzing will showcase its innovative LENZING™ Lyocell Dry fiber family at tabletop 202 during the Hygienix Conference, November 18-21, 2024.

Facts and figures:

LENZING™ Lyocell Dry fine has a linear density of 1.3dtex

LENZING™ Lyocell Dry standard has a linear density of 1.7dtex

Fabrics produced using LENZING™ Lyocell Dry fine and standard have the same basis weight (eg. 50gsm) but the “fine” material has a higher density with up to 30% more fibers in the same space.

LENZING™ Lyocell Dry coarse has a linear density of 6.3dtex


[1] Please refer to Lenzing Wood and Pulp Policy for more information.

[2] A range of LENZING™ Lyocell and Viscose fibers for nonwoven applications are certified by TÜV AUSTRIA to be biodegradable in soil, freshwater and marine conditions and compostable under home and industrial conditions.

3 Water drop contact angle measured >100° after 1h for all LENZING™ Dry fibers



More News from Lenzing

#Yarn & Fiber

Lenzing AG appoints Georg Kasperkovitz as Chief Executive Officer

The Supervisory Board of Lenzing AG has appointed Georg Kasperkovitz, Member of the Management Board and Chief Operations Officer, as Chief Executive Officer (CEO) of Lenzing AG with effect from June 1, 2026.

#Denim

TENCEL™ Lyocell - HV100 achieves global denim availability in six months; Vol. 2 debuts at Kingpins Amsterdam

When TENCEL™ Lyocell - HV100 debuted at last year’s Kingpins Amsterdam in October, 17 mill partners across five countries presented fabrics featuring the new fiber. Just six months on, participation has more than doubled, evolving into a global network that spans nine countries and four continents, signaling both strong industry momentum and growing demand.

#Techtextil 2026

Lenzing unveils three-tier cellulosic fiber portfolio for next generation protective wear

The Lenzing Group, a leading supplier of regenerated cellulosic fibers for the textile and nonwovens industries, today introduces Lenzing Solutions for Protective Wear. This integrated three-tier portfolio is anchored by LENZING™ FR fibers at the highest protection tier for inherent flame resistance and brings together complementary solutions including TENCEL™ Lyocell fibers, both EU Ecolabel-certified² and derived from certified or controlled wood sources³, within a unified protective wear architecture for the first time. The launch marks the most significant expansion of Lenzing’s protective wear business since the company pioneered inherently flame-resistant cellulosic fiber in 1977, and comes as the global personal protective equipment (PPE) market accelerates toward an estimated USD 130 billion by 2033⁴.

#Man-Made Fibers

Lenzing commissions 14 MW power‑to‑heat facility, strengthening grid stability and heat management

The Lenzing Group has successfully commissioned a new power‑to‑heat (P2H) facility with an electrical capacity of 14 megawatts. The installation converts renewable electricity directly into process heat, is fully integrated into the existing heat network at the industrial site, and represents a key building block for a fossil‑free heat supply. As project partner, VERBUND was responsible for the energy‑market integration and will operate the facility for balancing energy marketing, enabling it to respond flexibly to short‑term fluctuations in the power grid.

More News on Nonwovens / Technical Textiles

#ITMA Asia + CITME Singapore 2025

ANDRITZ sets focus on textile recycling and durable nonwoven production technologies at ITMA Asia 2025

International technology Group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at ITMA ASIA + CITME 2025 in Singapore, from October 28 to 31, 2025 (Hall 2, D106). ANDRITZ will showcase its MMCF production plants, textile sorting and recycling, bast fiber processing, needlepunch, airlay, and life-cycle service technologies, with a focus on sustainable solutions. Discover how these innovations can grow your business opportunities and support a greener future.

#ITMA Asia + CITME Singapore 2025

Dilo Group at ITMA ASIA Singapore 2025

At ITMA ASIA Singapore, the Dilo Group will exhibit at Booth No. H2 – D202. Together with Kansan Materials, Izmir, the company will present its latest developments and looks forward to welcoming visitors to exchange ideas and explore innovations in needling technology.

#Nonwovens

OUTLOOK™ 2025: Charting a sustainable and innovative future for the Nonwovens Industry

EDANA concluded its flagship event, OUTLOOK™ 2025, last week, marking it as a major success and addressing the biggest questions facing the industry. The three-day conference highlighted the urgent need for a unified approach to sustainability, regulation, and innovation in the absorbent hygiene and wipes sectors.

#Nonwovens

Global Nonwovens Alliance unveils Inaugural Board, advancing collaboration and growth worldwide

The Global Nonwovens Alliance (GNA), a tax-exempt federation jointly founded by INDA, the Association of the Nonwoven Fabrics Industry, and EDANA, the Voice of Nonwovens, announces the appointment of its founding Board of Directors. This group of leaders represents some of the most influential executives across the nonwovens value chain and reflects GNA’s mission to foster global collaboration, innovation, and growth in the industry.

Latest News

#Recycled Fibers

Indorama Ventures enables brands to scale circular textiles through proven, traceable supply chains

Indorama Ventures, a global leader in recycled polyester staple fibers and filament yarns, will exhibit at Textiles Recycling Expo in Brussels on June 24–25. At the event, the company will show how brands and textile manufacturers can build traceable, circular textile supply chains by working with proven partners who deliver recycled materials on an industrial scale.

#Recycled Fibers

RECOVER™ launches Recover™ Yarns to accelerate recycled cotton uptake

Recover™, a leading materials science company and one of the world’s largest producers of recycled cotton fiber, today announces the launch of Recover™ Yarns, a curated portfolio of ready-to-use yarn solutions designed to accelerate the adoption of recycled cotton across the apparel supply chain.

#Spinning

Barmag and Hitech Automation enter into partnership for an auto-doff system for texturing machines

Barmag (Suzhou) Technology Co., Ltd. and Hitech Automation Solutions PVT LTD. of Surat, India, have agreed to an exclusive partnership to jointly market Hitech’s Doffmatic automation solution for Barmag’s proven manual eFK texturing machines. In many texturing facilities, manual doffing processes remain heavily operator-dependent – resulting in issues such as increased scrap, inconsistent quality, and limited productivity.

#ITM 2026

Uster’s new Recycling Opening Index guides spinners to the perfect blend

Uster AFIS 6 now offers the key data for better decisions when blending recycled fibers. Process control is decisive in determining the quality and economic outcome. The new R Recycling Module of AFIS 6 introduces the Recycling Opening Index (ROI), so spinners can optimize their circularity credentials. It was officially launched at ITM 2026 in Istanbul, Türkiye.

TOP