[pageLogInLogOut]

#Market Analysis & Forecasts

Fluff pulp market maintains steady growth

Despite being impacted by political and economic woes, the global fluff pulp market in 2024 will reach 7.3 million air dried tonnes with a value of $9.7 billion, according to a new Smithers produced study, The Future of Fluff Pulp to 2029. This is up from 6.2 million air dried tonnes valued at $5.5 billion in 2019.
Fluff pulp market maintains steady growth amid strong headwinds © 2024 Smithers
Fluff pulp market maintains steady growth amid strong headwinds © 2024 Smithers


Fluff pulp consumption is forecast by the business intelligence firm to reach 8.6 million air dried tonnes valued at $11.5 billion by 2029. Compound annual growth rates are 3.3% (volume) and 11.9% (value) for 2019-24 and are projected at 3.4% (volume) and 3.6% (value) for 2024-29.

These projections show the fluff pulp market has maintained moderate volume and value growth amidst being jolted by geopolitical issues like the Russia/Ukraine war, Israel/Hamas War, and Houthi aggression in the Red Sea. Economically, China’s economic slowdown is slowing overall market penetration there as the percentage of consumers able to afford fluff pulp containing products falls.

Produced from coarse, long fibre softwoods, fluff pulp historically has been a specialty pulp grade with higher prices and margins than the more common papermaking pulp grades. Accounting for 9-10% of the total pulp market globally in 2024, the normal pricing for fluff pulp for the last 42 years has shown a cyclicality that has high and low points every 2-6 years.

End-uses for fluff pulp centre on the absorbent core for hygiene products, including the large global diaper/nappies, feminine hygiene, and adult incontinence markets, as well as nonwovens. 

Nonwovens, while only accounting for about 8.4% of the fluff pulp market, are growing at an over 4% per year rate. One major reason for this change is the global megatrend towards reducing plastics in nonwovens and other end-uses. While airlaid and coform nonwovens use are somewhat capacity constrained, fluff pulp use in spunlace is forecast to continue to grow much more rapidly than other fluff pulp uses.

Business landscape

After several years of relative stability (other than price), the global fluff pulp market has entered a very active phase. By 2029, either fluff pulp supply will be very tight or there will be unannounced expansion. Additional South American expansion and/or re-opening of some closed lines in North America are possibilities.

Regional production and consumption

The regional markets of North America and South America are the only major exporting regions for fluff pulp in 2024. North America will export over 80% of the fluff pulp it produces, and South America will export nearly 35% of its fluff pulp in 2024. In 2024, North America accounts for almost 80% of all fluff pulp produced globally and South America adds another 12%; the Americas combined produce almost 92% of the global fluff pulp supply.

All other geographic regions are net importers. South America had the largest fluff pulp capacity increases for 2019-24, increasing capacity by 92%, with expansions from Klabin, Suzano and Arauco. While the expansions seem to have slowed for 2024-29, South America is still projected to add almost 50% more fluff pulp production.

In consumption, Asia is the largest volume region, and is projected (for 2024-29) to resume its position as the fastest growing region. Western Europe is the second largest consumer of fluff pulp in volume and value from 2019-29. North America is third in consumption.

More info:

https://www.smithers.com/services/market-reports/nonwovens/the-future-of-fluff-pulp-to-2029


More News from Smithers

More News on Market Analysis & Forecasts

Latest News

#Recycled Fibers

RE&UP partners with Madewell and ISKO on textile-to-textile denim capsule

RE&UP Recycling Technologies is accelerating the shift toward a closed-loop textile economy through a collaboration with American denim brand Madewell and global fabric manufacturer ISKO. By transforming approximately 20,000 pairs of post-consumer jeans into recycled feedstock for a textile-to-textile denim capsule, RE&UP demonstrates the commercial viability of circular systems in the denim sector.

#Techtextil 2026

Sedo Treepoint will exhibit smart technologies for technical textile production

As technical textile production becomes increasingly complex and sustainability requirements intensify, digital integration is evolving from an efficiency tool into a strategic task. At Techtextil 2026 (April 21–24, Frankfurt am Main), Sedo Treepoint will present smart digital systems designed to address the demanding production environments of technical textile manufacturing. The company’s focus will be on practical technologies that enhance process transparency, reproducibility, and efficient resource use. Visitors will meet Sedo Treepoint in Hall 12, Booth D05.

#Techtextil 2026

ITM presents cutting-edge textile research at Techtextil

From April 21 to 24, 2026, the Chair of Textile Machinery and High Performance Material Technology (ITM) at TUD Dresden University of Technology will be presenting its current research at Techtextil, the leading international trade fair for technical textiles and nonwovens. In Hall 12.0, Stand D41, the team will be demonstrating how it combines high-performance fibers, AI-supported digital development tools and innovative machine technologies to develop textile solutions for lightweight construction, construction, medical technology and sustainable production from atom to product.

#Techtextil 2026

CHT Group to showcase intelligent specialty chemical solutions at Techtextil 2026

At this year's Techtextil 2026 in Frankfurt am Main, the CHT Group will be presenting its comprehensive portfolio of tailor-made specialty chemicals and process solutions for technical textiles. As a reliable partner to the global textile industry, the company offers innovative products and in-depth technical expertise across all areas of the textile value chain – from pretreatment, dyeing, and printing to finishing, coating, and fiber auxiliaries.

TOP