[pageLogInLogOut]

#Sustainability

Marchi & Fildi Group: positive balance for 10 years of the photovoltaic installation

© 2021 Marchi & Fildi Group
10 years after the installation of the photovoltaic plant in the production units in the Biellese region, the Marchi & Fildi Group takes stock of the operation and publishes the data on energy produced, consumed, and fed back into the grid.

Total savings of approximately €1m in energy costs and energy fed back into the electricity grid to cover the average annual consumption of around 4630 families

The photovoltaic plant owned by the Group is made up of 11,385 modules divided between the three facilities in Biella (Production), Cerrione (Dyeing mill) and Verrone (Logistics), which in total cover a surface of 16,515 sq.m.

The balance to be drawn from these 10 years is a positive one: in total 22,974,828 kWh have been produced, of which 7,292,027 kWh have been used in company activities, with a saving in energy costs of approximately €1m over 10 years.

The energy kWh produced and not used by the company was fed back into the grid and corresponds to the average annual consumption of around 4630 families *.

The Marchi & Fildi Group has always been committed to rationalising electric energy consumption with the aim of contributing towards an eco-sustainable development without compromising the rate of production and the ability to grow. In addition to producing its own electric energy, over the years, the company has also achieved an increasing number of Energy Efficiency Titles (TEE), otherwise known as white certificates. In 2021, 138 TEEs have been awarded as a result of such interventions as the introduction of LED lighting and the optimisation of the production processes which, while still as efficient as before, permit the company to reduce the electric energy consumption of the machinery.

“Choosing to produce electric energy from renewable sources in order to integrate the energy needs for the running of the establishments was one of the crucial factors on our route of innovation towards a sustainable end product. It is the result of the attention the owners have always paid to technological innovation which optimises processes and rationalises the resources with a view to eco-sustainable development and growth, and which has led to, among other things, the birth of ECOTEC®, our technology which valorises and reuses products both pre- and post-consumer” states Massimo Marchi, CEO of the Marchi & Fildi Group. “We are very satisfied to have been able to make a tangible contribution in an historical moment when the strong connection between the exploitation of resources and climate change is so undeniably apparent, as well as the conservation of such resources by the utilisation of renewable sources and virtuous cycles of recycling waste materials. We have done, and will continue to do, everything possible to make a constructive contribution to the community to which we also belong, seeking to preserve the area and the environment which surrounds us for future generations.



*In the meter class for the range of 3kW to 4.5 kW, the average consumption for residential properties is the equivalent of 3,382 kWh (source: Arera Relazione annual state of services for the year 2020). The calculations are the results of an internal study conducted by the Marchi & Fildi Group.

© 2021 Marchi & Fildi Group
© 2021 Marchi & Fildi Group


The Marchi & Fildi Group

Marchi & Fildi S.p.a was established in 2007 through the fusion of the mills Filatura Marchi and Fildi, owned by the Marchi and Dissegna families. Filidea is the youngest company within the Group, and was set up in 2008.

The Marchi & Fildi Group proposal for the fashion world consists of linear or circular knitting, weaving and hosiery. The distinguishing element in the collections is the focus on sustainability, which starts with the selection of the raw materials and finishes with the Ecotec® brand owned by Marchi & Fildi. The Filidea brand presents an assortment of natural, sustainable and certified yarns designed for the high-quality market sector. Filidea is also specialised in the production and development of technical yarns intended for protective and work clothing, for the automotive industry and various industrial uses.

The modern dyeing department and the pilot research and development facility allow the Group to create new yarns for the collections, alongside the collaboration with universities and research centres and with various partners for the development of specialised projects.

Today, with the entry of the third generation of entrepreneurs, Marchi & Fildi S.p.a is a group of mills which is known internationally and which has a constant rate of growth.

Ecotec® is the patented production process developed by Marchi & Fildi to create new yarns by upcycling the pre- and post-consumer cut-offs. The Ecotec® range ensures a reduced environmental footprint: up to 46.9% savings in terms of energy consumption, up to 46.6% reduction in terms of CO2 and up to 61.6% reduction in terms of water consumption along the whole supply chain.



More News from TEXDATA International

#ITM 2026

ITM 2026: The new geography of textile production

New production hubs are emerging across North Africa and Central Asia, while Türkiye is accelerating its transformation toward higher-value, technology-driven and more sustainable textile manufacturing.

#Research & Development

“Production is a product”

From technical textiles and AI-driven robotics to the limitations of textile circularity: Professor Dr Thomas Gries looks back on more than two decades of development at ITA Aachen. In the interview, he explains why production technology remains a decisive success factor, discusses international collaborations and innovation ecosystems, and shares his views on the transformation of production landscapes and the challenges facing an increasingly regulated industry.

#Knitting & Hosiery

“We need to move away from the price trap and return to a value-driven mindset.”

With its new Textile Innovation Center, KARL MAYER is sending a strong signal for innovation, collaboration, and the future of textile applications. In this interview, Karl Josef Mayer discusses new opportunities in warp knitting, the processing of staple fibres, recycling, the changing role of machinery manufacturers, and why the textile industry must once again focus more strongly on the value of textiles. by Oliver Schmidt

#Associations

“Innovation, resilience and international experience remain the great strengths of the Swiss textile machinery industry”

Geopolitical uncertainty, growing competitive pressure from China, new free trade agreements and the shift towards a circular economy are currently reshaping the global textile industry. In this interview, Cornelia Buchwalder discusses the current mood within the Swiss textile machinery sector, the industry’s distinctive innovative strength, new market opportunities in India and Asia, and the technological trends that could shape the upcoming trade fair cycle leading up to ITMA 2027.

More News on Sustainability

#Recycling / Circular Economy

NEUMÜHLE launches mono-material hoodie designed for textile recycling

With the Circular Mono Hoodie, Zurich-based label NEUMÜHLE introduces a new essential designed around a single-material principle. The textile construction is cotton throughout, right down to the sewing thread. Entirely free from elastane, the hoodie launches as a Limited Drop for CHF 139. Take-back, collection and existing recycling partnerships complement its circular design.

#Industry 4.0 / Digitalization

EIM evolves into a new Environmental Intelligence to measure the impact of textile production

¿Do we really know the environmental impact behind a garment? Answering this question remains one of the textile industry’s major challenges. Garment production involves multiple stages, from yarn and fabric to final finishing, carried out by different players across the supply chain. Accesing reliable data from each process, connecting it and establishing a common language are essential to understanding a product’s true impact.

#Associations

ITMF names three winners of the Sustainability & Innovation Award 2026

Three projects from the UK, Korea and China have been selected as winners of the ITMF Sustainability & Innovation Award 2026. The projects address textile-to-textile recycling, chemical recycling for automotive textiles and a regenerative approach combining silk production with ecological restoration.

#Europe

Textile ETP launches bioeconomy strategy for Europe’s textile industry

On 22 September 2026, Textile ETP's Circular & Biobased Textiles Innovation Hub published its strategy for the biobased and circular transformation of Europe's textile and apparel industry.

Latest News

#Knitting & Hosiery

SHIMA SEIKI to showcase digital product creation at Apparel Sourcing Week

Leading digital textile solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan will exhibit at Apparel Sourcing Week 2026 in Bengaluru, India next month. The exhibition provides a platform for the entire apparel value chain, bringing together manufacturers, brands, suppliers and solution providers in one location.

#Digital Printing

SNA GZ accelerates its on-demand production strategy with Kornit Digital

SNA GZ is leveraging the Kornit Atlas MAX PLUS to expand its music merchandise production, streamline e-commerce order fulfillment, and grow its print-on-demand business across Europe. This investment increases SNA GZ's textile production capacity by 150% (2.5×), enabling the company to meet growing demand and support its continued expansion.

#Raw Materials

New Cotton Review examines competitiveness, market risk, and opportunities

From moving record volumes of Brazilian cotton to market, to managing price volatility, unlocking Ethiopia’s production potential, and strengthening African textile trade, the latest edition of Cotton: Review of the World Situation examines some of the most consequential opportunities and challenges facing the global cotton industry.

#Knitting & Hosiery

Long John puts KARL MAYER's RDJ 7/3 into operation and strengthens its position as a market leader

KARL MAYER has just unveiled its new RDJ 7/3 Jacquard Double Needle Bar Raschel Machine in the international trade press, and the innovation is already causing a stir in the market: The Long John Group, a leading manufacturer of performance footwear fabrics and a long-standing partner of renowned brands, was the first customer to invest in the new machine and celebrated its official launch at its Indonesian plant on August 20.

TOP