#Knitting & Hosiery

2021-10-18

STOLL training courses on k.innovation CREATE, a new software for the creation of knitwear designs

With k.innovation CREATE, a new design software from STOLL and KM.ON, the flat knitting industry is getting a powerful tool that combines knitwear design with 3D product development and knit production. The functions offered include shape creation and grading, digital stitch and yarn development and data export for the simulation in any 3D software.

Digital knitwear design with just a few clicks – learning how it's done

STOLL explains how these can be used efficiently in practice-oriented training courses. The courses for 2021 last two days, are conducted online and are held in English. Target groups are mainly knitwear designers, but also pattern makers, knitwear producers and 3D artists. Prior knowledge of flatbed knitting structures, stitch formation principles, yarns and 3D product development is a plus.

Shape and fabric simulation in CREATE © 2021 KARL MAYER

The content of the courses accordingly focuses on the most important software functions required for the digital development of knitwear. Corresponding training exercises and a manual also provide support for daily work with the software. At the end of the course, each participant receives a certificate.

The first training was held in September 2021. Others are the

27 and 28 October

17 and 18 November

8 and 9 December.

Data from CREATE used in CLO © 2021 KARL MAYER

STOLL is looking forward to its course participants. Registration is possible under:

training@stoll.com.

ITM 2026: KARL MAYER presents new perspectives

KARL MAYER will once again showcase itself as a strong partner to the Turkish textile industry at ITM in Istanbul from June 9 to 13. At Booth 303 A in Hall 3 of the Tüyap Fair Convention and Congress Center, the industry leader will exhibit solutions for warp knitting, warp preparation, and technical textiles – tailored to a challenging economic environment.

Techtextil 2026: KARL MAYER impresses as an innovative sector partner

KARL MAYER looks back with satisfaction on its participation in Techtextil 2026. From April 21 to 24, the international industry leader used the trade show in Frankfurt to meet with numerous key customers at its booth and, at the same time, establish many new contacts. Most visitors came from Germany, followed by major markets such as Poland, the United Kingdom, Turkey, France, and Portugal.

“We Believe in the Value of Textiles”: Successful Opening of the KARL MAYER TEXTILE INNOVATION CENTER

KARL MAYER inaugurated its new, state-of-the-art TEXTILE INNOVATION CENTER (TIC) with a four-day opening week from April 21 to 24. The highlight of the week was the grand opening on Thursday, which drew a strong turnout from the international textile industry: around 220 customers, brands, and partners from across the textile value chain came to the company’s headquarters in Obertshausen for a first-hand look at the new high-tech development environment and lively exchange with industry peers.

Mayer & Cie. Global is getting ready for ITM 2026

ITM 2026 marks the beginning of a new chapter for Mayer & Cie. Global. For the first time, the company will present itself to the international textile machinery industry in its new setup: combining proven circular knitting technology engineered in Germany with a clear commitment to its Albstadt headquarters and an internationally shaped, agile management approach.

Closing completed – Mayer & Cie. Global starts business operations

The future of the Mayer & Cie. brand has been secured: Following the successful completion of the purchase agreement for assets in the circular knitting machinery segment of the German traditional company Mayer & Cie., which was signed in February this year, the brand will continue to exist. The transfer of these assets to the new owner, Xu Hongjie, was formally completed yesterday afternoon. This clears the way for the resumption of business operations at the Albstadt site.

KARL MAYER strengthens partnerships in the composites industry at JEC World 2026

KARL MAYER further strengthened its role as a reliable and competent partner to the composites industry at JEC World 2026. The global market leader in textile machinery manufacturing used the trade show to meet key customers, establish numerous new contacts, and engage in in-depth technical discussions.

European Flax-Linen & Hemp step into advanced manufacturing: Enabling filament winding, 3D printing and high-performance composite processes

The Alliance for European Flax-Linen & Hemp announces a new wave of technological advancements demonstrating how flax-linen and hemp fibres are now being successfully integrated into advanced composite manufacturing processes. These developments mark a transition beyond traditional hand lay-up techniques, positioning natural fibres as credible, scalable solutions for high-performance industrial applications.

SETEX turns dyeing and finishing data into daily production control

At ITM 2026, SETEX will show how textile mills can use machine, recipe, quality and energy data for more reliable daily production decisions — not as another reporting layer, but as part of the running dyeing and finishing process. With OrgaTEX X3 MES, E390x/C390x controllers, CamCOUNT and FabricInspector Portable, SETEX connects planning, machine execution and fabric-related quality insight within existing mill structures.

Fifteen years of Autoneum – From spin off to global technology leader

What started as a strategic carve‑out has since become the success story of a global technology leader in acoustic and thermal management solutions for vehicles. Headquartered in Winterthur, Switzerland, Autoneum supplies leading automobile manufacturers worldwide with innovative, lightweight and increasingly sustainable solutions.