#ITMA Asia + CITME 2018

2018-09-12

ANDRITZ presents its cutting-edge solutions at ITMA ASIA + CITME 2018

ANDRITZ air-through bonding line at the CETI facilities. (c) 2018 Andritz

International technology Group ANDRITZ will be presenting its innovative nonwovens and textile finishing technologies for the Asian markets at the ITMA ASIA + CITME 2018 show in hall H2, booth A24. In response to market demands, ANDRITZ has yet again raised the bar for turnkey and customized solutions for drylaid, spunjet, thermobonding, and wetlaid, as well as for conversion of absorbent hygiene products.

ANDRITZ offers unique technologies tailored to each customer’s individual needs.

ANDRITZ AIR-THROUGH BONDING TECHNOLOGY – A NEW SOLUTION FOR THE HYGIENE MARKET

Air-through bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition and distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high production capacities and high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has recently installed an air-through bonding oven from ANDRITZ. Customers can compare the technical results obtained from two different options: bonding with the flat belt oven or with the drum (both supplied by ANDRITZ). If customers would like to see the new solution for themselves, they are most welcome to conduct trials at the CETI (European Center for Innovative Textiles) in Lille, France.

FULL DRYLAID PROCESESSES OFFER WITH THE ANDRITZ AXCESS RANGE

Thanks to its aXcess portfolio, ANDRITZ offers the full range of drylaid processes for medium production capacities. During the past few months, Chinese spunlace producers have invested in several aXcess lines with direct-line and crosslapped configurations manufactured by ANDRITZ Wuxi. This booming market goes hand in hand with new trends such as the development of the facemask industry and continues to be driven by the growth of wipes applications.

In the medium-capacity needlepunch area, ANDRITZ signed a cooperation agreement in 2017 with ShanTou SanFai Nonwoven Machinery, a leading supplier of needlelooms in China. This cooperation fits together perfectly, uniting the advantages of proven technologies and providing reliable solutions for a wide range of applications in the needlepunch industry. The ANDRITZ aXcess range for web forming and SanFai’s needlelooms offer a big advantage in terms of investment security, innovation, and quality, and this combination also meets the increasing demands of a strong, growing market.

To better serve the local market, ANDRITZ Wuxi focuses on increasing efficiency and shortening delivery time – from project management and design, to service work.

NEW DEVELOPMENT IN TEXTILE CALENDERING

With the latest development in textile calendering, ANDRITZ in co-operation with Rolf Ramisch, who has over 45 years of experience in this specific business and commands excellent expertise in deflection-controlled roll technology, is again raising the bar for the textile calender market. The new teXcal raconip calender is versatile, operator friendly, and provides IIoT (Industrial Internet of Things) features for a smart production process. Sensors on the machine collect and archive all machine data and send them to a monitoring system. This intelligent production equipment offers a transparent and optimized process as well as a forecast for maintenance planning. In addition, the calender includes an optimized, deflection-controlled roll with unrestricted profiling possibilities over the entire roll width. This ensures maximum production flexibility and reproducible product properties – e.g. absolute flatness and ideal air permeability for technical textiles.

The ANDRITZ team is looking forward to meeting you at ITMA ASIA + CITME 2018 and to presenting its wide range of innovative products adapted to the Asian market.

A Penteadora starts up ANDRITZ textile recycling and needlepunch nonwoven lines in Portugal

A Penteadora SA has successfully started up a complete mechanical textile recycling line and a needlepunch nonwoven line supplied by ANDRITZ at its production site in Unhais da Serra, Portugal. This investment enables A Penteadora to expand its industrial capabilities and develop a new generation of solutions based on pre- and post-consumer recycled textiles. The input materials originate from its own production waste and other textile waste streams. Both lines are fully operational, and the first products are expected to reach the market in July.

ATCO Hygienics, Uzbekistan, orders baby diaper production line from ANDRITZ

International technology group ANDRITZ has received an order from ATCO Hygienics to supply a new baby diaper production line for its plant in Tashkent, Uzbekistan. The order is included in ANDRITZ’s order intake for the first quarter of 2026. Commissioning of the production line is scheduled for the end of 2026.

Kruger, Canada, orders first nonwovens line for sustainable wipes from ANDRITZ

International technology group ANDRITZ has received an order from newly established Kruger Nonwovens to deliver a complete WetlaceTM hybrid line for the Wayagamack mill in Trois-Rivières, Quebec, Canada. With this investment, pulp and paper producer Kruger is preparing to enter the nonwovens market with a new generation of plastic-free, chemical-free materials for sustainable wipes. The line is the first of its kind in Canada and is scheduled to start production in 2028.

ANDRITZ at INDEX ’26: Driving sustainability with next-generation nonwoven technologies

From May 19-22, ANDRITZ Nonwoven & Textile is presenting its innovative solutions for the nonwoven & textile industry in Geneva, Switzerland. ANDRITZ will focus on technologies for sustainable and durable nonwovens, converting, sustainable fiber processes, textile recycling, and life-cycle services on booth 2114 in hall 02.

Carrington Textiles publishes third Sustainability Report

Carrington Textiles has announced the publication of the third Sustainability Report from the RTS Textiles Group, highlighting another year of progress towards more responsible manufacturing across its global operations. The report outlines continued investment in technologies and initiatives designed to improve environmental performance and support long-term business resilience across the Group’s manufacturing facilities in the UK, Portugal and Pakistan.

Barmag Fuzhou Customer Day concludes successfully, boosting high-quality chemical fiber growth in Fujian & Guangdong

Barmag hosted its Customer Day themed “A New Era. Powered by Innovation.” in Fuzhou on June 28, welcoming nearly one hundred invited customers from Fujian and Guangdong provinces. Georg Stausberg, CEO of Barmag Group, attended along-side the sales and R&D expert China team to jointly present integrated solutions covering the entire man-made fiber value chain.

Recover™ and Ünteks Group partner to scale recycled cotton in knitwear

Recover(TM), a global producer of low‐impact, high‐quality recycled cotton fiber, announces a new partnership with Ünteks Group, a vertically integrated textile manufacturer based in Turkey. The collaboration focuses on the development of circular knit fabrics and garments, combining Recover’s recycled cotton fiber with Ünteks Group’s integrated capabilities across knitting, dyeing, printing, and garment production.

STEELTOP®: A new benchmark in flat tops for spinning preparation

Modern carding generations achieve higher production performance, placing significantly greater stress on flat tops. Higher cylinder speeds and increased fiber density, combined with tighter carding gaps, create more demanding operating conditions. At the same time, poorer raw material quality and the increased use of recycled materials further intensify these challenges. With STEELTOP®, Trützschler introduces a new full steel flat top series developed for these demanding modern carding processes.