[pageLogInLogOut]

#ITM 2022

ITM 2021 will accelerate the textile sector that has become stationary due to pandemic

(c) 2020 ITM
The ITM 2021 Exhibition, which is postponed to 22-26 June 2021 due to the coronavirus pandemic outbreak, will direct the world and Turkish textile industry, which will demonstrate a vigorous comeback in the post-pandemic period.

The ITM Exhibition, which was planned to be held between 2-6 June this year, was postponed to 22-26 June 2021 due to the troublesome Coronavirus pandemic. Participating companies in countries that had to interrupt their production, especially Italy, France, Spain, Germany and China, which were most affected by the virus, welcomed the postponement of the ITM Exhibition. The countries, holding similar opinions that it is not possible to save from the pandemic without effective drug treatment or vaccine against coronavirus, started normalization process by increasing their protective measures while fighting against the pandemic. The wheels started to turn again in the factories, and production and orders gained momentum.

Turkish Textile Industry Displayed Its Strength

Turkey, which did not affected from pandemic as much as other countries due the number of cases and death rates progress low and continues its production especially in textile sector, will be the correct address for the exhibitions to be held in the post-pandemic period. While occurring shortage of mask and protective clothing all over the world, Turkey which has a strong infrastructure in the field of textile, garments, nonwoven has supplied personal protective equipment to the world on the one hand, while meeting its own needs. Turkey has shown that it is one of the largest producers and raw material suppliers of the world and Europe in this process. The major brands and companies in Europe and the United States shifted their orders from China to Turkey, due to China being the starting point of the Coronavirus pandemic. Turkey, which will accelerate technological investments due to the increase in production, will continue to lead the world textile industry.

(c) 2020 ITM
(c) 2020 ITM


(c) 2020 ITM
(c) 2020 ITM


ITM 2021 Will Be the Meeting Point of Textile Technology Leaders

ITM 2021 Exhibition, which will be held between 22-26 June next year, will coincide with the period when the global economy will resuscitate, which will increase the interest of the companies to the exhibition. Thus, thousands of international exhibitors will choose the ITM 2021 Exhibition, which is the meeting point of textile technology leaders, to highlight their latest innovations.

State of the Art Technologies and New Products to Meet Textile Investors

This synergy in the Turkish textile industry will have a positive impact on the ITM 2021 Exhibition. Next year, the latest technologies and new products that will be demonstrated at the ITM 2021 Exhibition, which will open its doors at Istanbul Tuyap Exhibition and Congress Center, will meet textile investors from all over the world.


More News from TEKNIK FUARCILIK INC.

#HIGHTEX 2026

The future of Technical Textiles takes shape at HIGHTEX 2026

HIGHTEX 2026 International Technical Textiles and Nonwoven Exhibition is preparing to open its doors at Tüyap Fair and Congress Center between 9–13 June 2026. Bringing together the world’s leading manufacturers and technology providers in the field of technical textiles and nonwoven technologies in Istanbul, the exhibition will go beyond being merely a trade platform where new products are displayed and will assume the character of an international hub where the strategic future of the industry is discussed.

#ITM 2026

The hub of smart and sustainable transformation in yarn technologies: ITM 2026

With global fiber production projected to reach 169 million tons by 2030, yarn manufacturing is becoming one of the most strategic fields within the textile machinery industry. Located in Halls 6, 7, and 10, the Yarn Hall at ITM 2026 is set to bring together industry professionals with innovative solutions developed around automation, energy efficiency, digitalization, and circular production.

#HIGHTEX 2026

HIGHTEX 2026: The Gateway to the Future of Sportech Textiles

HIGHTEX 2026, which will take place on 9–13 June 2026, is preparing to become a strategic meeting point for the most innovative manufacturers, technology developers, and global buyers in the field of sportech textiles. At the HIGHTEX 2026 Exhibition, where sportswear, outdoor equipment, footwear, protective sports products, and smart textile manufacturers will have the opportunity to closely explore the latest technologies, the event will stand out as one of the industry’s most comprehensive trade platforms.

#ITM 2026

ITM 2026: The meeting point of green transformation and the digital future in the textile industry

Shaping the transformation of the textile industry, the ITM 2026 International Textile Machinery Exhibition is set to lead the sector into the future with a strong focus on sustainable production and digital technologies. From environmentally friendly machinery to smart manufacturing systems, from energy-efficient solutions to artificial intelligence–supported applications, ITM 2026 will present a broad vision that defines the roadmap of textile technologies for the industry.

More News on ITM 2022

Latest News

#Techtextil 2026

Knowledge that drives progress: Techtextil and Texprocess forums strengthen the global textile industry with a future-oriented programme

From AI-supported production optimisation and digital manufacturing solutions to circular technologies and bio-based high-performance materials: the Techtextil and Texprocess forums provide answers to the key challenges of the global textile industry with a curated content programme. As hubs for innovation and knowledge, they enhance competitiveness and offer orientation in changing markets. From 21 to 24 April 2026, Frankfurt is once again the global meeting point for thought leaders from industry, research and business.

#Techtextil 2026

Enhanced protection without added weight: Innovative technology for flame-retardant textiles doubles reaction time and ensures high wearing comfort

Flame-retardant textiles have long faced the same dilemma: the higher the level of protection, the greater the compromise in comfort, weight and breathability. This is especially important for workwear and protective clothing worn for long hours, where comfort is crucial to wearer acceptance and satisfaction. At Techtextil 2026 in Frankfurt, Swiss company Textilcolor AG will unveil pyroshell™, an innovative flame-retardant technology designed to tackle this challenge. Protection is provided by a graphite-based functional layer integrated into the textile structure, which doubles the reaction time before burns occur while significantly enhancing comfort. The material does not release any toxic fumes and offers textile manufacturers entirely new opportunities to design and produce protective and functional garments. It is also durable enough to withstand up to 50 industrial washes.

#Composites

JEC WORLD 2026 opens: Paris becomes the World Capital of composites

JEC World 2026 opens tomorrow, March 10, at Paris Nord Villepinte, bringing together the entire composites ecosystem for three days of exhibitions, conferences, technical sessions, strategic industry gatherings, and business meetings. As the “festival of composites”, JEC World is also a destination for a broad spectrum of other professional visitors, eager to discover how these advanced materials can offer sustainable solutions to their industries.

#Spinning

Barmag presents the next generation of POY production – energy-efficient and partial-automated

With POY 2.0, Barmag is introducing a completely redesigned spinning concept that takes the production of partially oriented yarn (POY) to a new level in terms of technology and economy. The solution, which was presented to a selected audience of experts for the first time at ITMA Asia + CITME 2025, was met with great enthusiasm: several yarn producers worldwide immediately expressed their interest in a pilot plant.

TOP