#ITM 2022

2020-03-18

ITM and HIGHTEX 2020 exhibitions will be held between 14-18 July 2020

ITM 2020 International Textile Machinery Exhibition and HIGHTEX 2020 International Technical Textile & Nonwoven Trade Fair, organized with the partnership of Tüyap Tüm Fuarc?l?k Inc. and Teknik Fuarc?l?k Inc., and in cooperation with TEMSAD, were planned to be held in Istanbul Tüyap Convention and Congress Center this year between June 2-6, have been postponed to 14-18 July 2020, as a result of decisions taken by World Health Organization (WHO) and Turkey – Ministry of Health.

Recently, ITM and HIGHTEX Project Group made teleconference with both of the exhibition participants; the countries where such intense participation to both of exhibitions from Italy, Germany, Switzerland, China and Turkey. As a result of these discussions, organizational commitee was decided to postpone that exhibitions in line with requests from ITM and HIGHTEX 2020 participants.

The ITM and HIGHTEX Project Groups, see their primary responsibility as to protect the health, rights and investments of esteemed participants, visitors and collaborators. Therefore, within the scope of decisions taken by World Health Organization (WHO) and Turkey – Ministry of Health, ITM and HIGHTEX exhibitions have been postponed from 2-6 June 2020 to 14-18 July 2020.

Global growth in the technical textile sector drives interest in HIGHTEX 2026 to its peak

The continued steady growth of the technical textiles and nonwoven sector worldwide is increasing interest every year in the HIGHTEX Exhibition, one of the sector’s most important meeting points. In this strong growth climate, HIGHTEX 2026 International Technical Textiles and Nonwoven Exhibition, which will bring together the sector’s leading manufacturers, technology providers, and international buyers, is preparing to open its doors at Tüyap Fair and Congress Center on June 9–13, 2026.

The address for environmentally friendly dyeing and finishing systems: ITM 2026

Dyeing and finishing technologies, one of the most critical and value-added areas of the textile sector, have gained strong growth momentum on a global scale. Technologies that are pioneers of this transformation focused on sustainability, quality and efficiency will meet with sector professionals at the ITM 2026 International Textile Machinery Exhibition. Dyeing and Finishing Hall (11–12) will host the latest technologies that increase efficiency, optimize resource use and reduce environmental impact in textile finishing processes.

The global meeting point of the technical Textiles and nonwoven industry: HIGHTEX 2026

One of the world’s most prestigious technical textiles and nonwoven exhibitions, the HIGHTEX 2026 International Technical Textiles and Nonwoven Exhibition, is preparing to open its doors to industry professionals at the Tüyap Fair and Congress Center in Istanbul between June 9–13, 2026. Bringing together manufacturers, technology developers, and global buyers from all around the world in the field of technical textiles, HIGHTEX 2026 will be an important platform showcasing the sector’s innovative solutions and paving the way for new collaborations.

The future of Technical Textiles takes shape at HIGHTEX 2026

HIGHTEX 2026 International Technical Textiles and Nonwoven Exhibition is preparing to open its doors at Tüyap Fair and Congress Center between 9–13 June 2026. Bringing together the world’s leading manufacturers and technology providers in the field of technical textiles and nonwoven technologies in Istanbul, the exhibition will go beyond being merely a trade platform where new products are displayed and will assume the character of an international hub where the strategic future of the industry is discussed.

Europe’s textile future at a turning point: New 2030 Circularity Blueprint aims to scale recycling and unlock investment opportunities

The EU textile system is at a critical crossroads. Today, less than 1% of discarded garments are recycled into new garments, despite EU-wide obligations for separate collection. In response, Global Fashion Agenda (GFA) is launching the 2030 Circularity Blueprint, in partnership with ReHubs. This ambitious initiative is designed to support the transformation of the EU textile ecosystem to advance textile-to-textile recycling and drive the transition to a circular economy.

Regional hemp bast for lightweight construction profiles

The cultivation of fibre hemp for the production of ropes and clothing has a long tradition in Saxony. Due to its excellent fibre properties, it is also suitable as a renewable raw material for reinforcement in fibre composites. At the STFI and IWU in Chemnitz, the CannaPul project is cur- rently investigating how a regional value chain for hemp-based lightweight construction profiles can be established. To this end, the technical processing of hemp fibres into continuous fibre strands and their embedding in a suitable bio-based matrix are being investigated.

Kornit Digital launches Konnections 365

Kornit Digital (NASDAQ: KRNT) (“Kornit” or the “Company”), a global pioneer in sustainable, on-demand digital fashion and textile production today announced the launch of Konnections 365 - a year-round movement designed for the people moving the apparel, print, and retail industries forward. The strategy is built on the overwhelming success of Konnections 2026 held in Hollywood, Florida, featuring more than 500 customers, partners, and collaborators who together are driving the future of apparel and textiles.

Techtextil 2026: KARL MAYER impresses as an innovative sector partner

KARL MAYER looks back with satisfaction on its participation in Techtextil 2026. From April 21 to 24, the international industry leader used the trade show in Frankfurt to meet with numerous key customers at its booth and, at the same time, establish many new contacts. Most visitors came from Germany, followed by major markets such as Poland, the United Kingdom, Turkey, France, and Portugal.