[pageLogInLogOut]

#ITM 2013

BONAS at ITM Istanbul 2013

The amazingly compact Bonas Si11-22 with 10560 hooks (c) 2013 Bonas
Bonas (Hall 8 – Booth 816 ), Inventors, Innovators and Pioneers of the electronic Jacquard, will present and demonstrate at ITM a comprehensive range of their latest innovation.

Double Hook Capacity, Double Design Freedom, Double End Density,…on the most condensed jacquard in the market. Bonas has an established reputation as both an innovator and a pioneer in electronic jacquard machinery. Visitors to ITM Istanbul will be amazed at the new Si Bonas Jacquard machine which will be exhibited on their booth 816 in Hall 8. The Si (Shed Innovator), introduced at ITM with 10560 hooks, is over 40% more condensed then any existing electronic jacquard with the same hook capacity, resulting in better accessibility, higher ergonomics and better functionality. More condensed does not only mean smaller, less deep and less high, but also over 1 ton lighter, compared with any comparable jacquard, whilst retaining its stability.

Low power consumption: Although total power consumption of any Bonas jacquard is already amongst the lowest, it’s needless to say the Si has highly reduced power consumption. When evaluating power consumption, both drive and selection mechanism must be taken into account. Fewer and lighter drive parts allow much lower drive power consumption and selection power is highly reduced by the newly developed micro-selector. A double gain for the customer!

High design flexibility - High speed - High productivity: With the Si you don’t have to compromise between design flexibility and speed limitation inherent to big hook size jacquards. The Si - undoubtedly the lightest in its range – has a much lower drive torque and high speed weaving with multi hook capacity is no longer a dream. Double design freedom and higher productivity, another double gain for the customer!

Easy maintenance – better ergonomics: Grease points are now accessible without removing the machinery covers. Our new and patented micro-selector, with only one moving part is exempt from any maintenance or lubrication – a major advantage when considering Jacquard sizes of 6144 hooks or above. Even the bigger jacquards, such as the exhibited Si with 10560 hooks, have far better accessibility and ergonomics leading to time saving. Less and faster, once more a double gain!

100% Diagnostics: Micro-selector simplicity. Bonas’ micro-selector, with its inherent 100% electronic principles, gives 100% diagnostic. Other important factors – temperature, air-flow, design integrity and many others – are closely monitored, managed and cared for, so you don’t have to. Relax, safe in the knowledge of fault free fabric, even at cold start-up! The whole intelligent system is powered by current drive technology, delivering the correct amount of power, always, despite whatever inconsistencies your outside power supply may have.

More News from N.V. Michel Van de Wiele, Carpet and velvet weaving machines

#Weaving

Vandewiele Group: Innovation across the textile value chain at ICFE Istanbul 2026

At the 2026 Istanbul Carpet & Flooring Expo (ICFE), Vandewiele Group presents its latest advancements spanning the entire textile value chain. From spinning and weaving to tufting, carpet manufacturing and digital finishing, the Group demonstrates how integrated innovation can boost performance, efficiency and sustainability across all stages of production. As a global technology leader, Vandewiele continues to develop solutions that strengthen processes, enhance product quality and enable smarter, greener manufacturing.

#ITMA Asia + CITME Singapore 2025

Vandewiele Group has technology excellence on display at ITMA ASIA Singapore 2025

At ITMA ASIA Singapore 2025, Vandewiele Group brands will converge to showcase breakthrough technologies across weaving, spinning, knitting, finishing, and digital solutions. From carpet weaving and jacquard, from spinning to knitting components, to MES platforms and AI-powered automation, the group presents a comprehensive vision for the future of textile manufacturing.

#Weaving

VANDEWIELE & Q-Tech unveil cutting-edge textile machinery at IGATEX 2025

VANDEWIELE, a global leader in textile machinery innovation, along with its Pakistani representative Q-Tech, is excited to announce its participation in IGATEX-2025, the premier international exhibition for textile machinery and technology. The event will be held from April 24th to April 26th, 2025, at the Expo Center, Karachi, where VANDEWIELE & Q-Tech will be presenting their innovative solutions at Hall 5, Booth C-5-17.

#Weaving

VANDEWIELE and Shaj Corporation showcase cutting-edge textile innovations at DTG-2025

VANDEWIELE, a global leader in textile machinery, in partnership with Shaj Corporation, is set to present its latest innovations at the 19th Dhaka International Textile & Garment Machinery Exhibition (DTG-2025), taking place from February 20–23, 2025, at the International Convention City Bashundhara (ICCB), Dhaka. Visitors can explore VANDEWIELE’s cutting-edge solutions at Hall-8, Booth No. 017 (8-017). With a legacy of excellence, VANDEWIELE continues to lead the textile industry with high-performance machinery for carpet weaving, extrusion, and sewing.

More News on ITM 2013

Latest News

#Techtextil 2026

DIENES at Techtextil 2026: Flexible pilot lines for bio-based fiber development

The growing relevance of bio-based materials in technical textiles is accompanied by increasing demands for reproducibility, high-quality data, and scalable process routes. Especially when working with cellulose and its derivatives, chitosan, lignin-based approaches, or bio-based PAN as a carbon-fiber precursor, R&D teams face variable feedstock quality, tighter process windows, and the need for reliable comparability across trials. This calls for flexible, data-driven experimental setups that can be reconfigured efficiently when recipes, solvents, and raw-material batches change.

#Texprocess 2026

Gunold showcases embroidery product range and services at Texprocess

At Texprocess 2026, GUNOLD will present numerous hands-on examples related to embroidery in Hall 8, Booth E20. The focus is on creative embroidery designs as well as the extensive product range of threads, nonwovens, and accessories for embroidery and embellishment. “Trade visitors can once again look forward to many new and creative embroidery designs. Of course, we will also showcase the matching products required to bring these ideas to life,” announces Marketing Manager Stephan Gunold.

#Nonwovens

EDANA and more than 70 industry organisations call for consistent exemptions in EU packaging regulation

EDANA, together with more than 70 industry associations and organisations, has issued a joint statement commenting on the European Commission’s Delegated Act under Article 29 of the Packaging and Packaging Waste Regulation (PPWR).

#Raw Materials

A Powerful Opening: Global thought leaders launch the International Cotton Conference Bremen

The International Cotton Conference Bremen will open on 25 March 2026 in the Parliament building of the Free Hanseatic City of Bremen with a keynote session of exceptional calibre. Distinguished international experts will set the stage for the conference by offering incisive perspectives on the most pressing challenges and the defining trends shaping the future of the global cotton trade. Their insights will span a broad spectrum — from geopolitically driven disruptions affecting global supply chains to the opportunities emerging from innovation-led agriculture capable of supporting a growing world population. Together, these opening keynotes will frame the dialogue of the conference, highlighting both the complexity of today’s market environment and the pathways toward a resilient and forward-looking cotton sector.

TOP