#INDIA ITME 2022

2022-11-24

Sedo Treepoint participates in INDIA ITME 2022 showing its smart and sustainable solutions

Sedo Treepoint is part of INDIA ITME, which will be held at India Expo Centre & Mart in Greater Noida from December 08-13, 2022. The global trend is towards saving energy, increasing efficiency, and delivering high quality while reducing costs. Therefore, intelligent solutions are needed to help identify the current state and reduce resource requirements. In hall 1 at booth B5, Sedo Treepoint presents its products around the Smart Factory and intelligent manufacturing for dyeing and finishing plants.

Sedo Treepoint provides controller and software solutions which are perfectly matched to each other. The communication between the systems runs smoothly and contributes to a Smart Factory.

The Sedomat 6000/8000 controller Series comes in four different variants and is the ideal choice for every type of dyeing and finishing machines. Through the high number of internal and external in- and outputs it can be adapted easily. The new series is high flexible and offers different interface options like CANopen, Profibus DP and MODBUS RTU. To improve the communication between different systems, OPC UA and MQTT interfaces are used for data communication.

SedoMaster is the core of the production shop floor. Central production planning, control, monitoring, and reporting becomes available. It is a powerful tool for all key operators and the management due to the connection of all dyeing and finishing machines. The Reporting tool gives information on productivity, resource costs and OEE. SedoMaster also links all periphery systems like dispensers, dissolvers, or ERP system.

ColorMaster is an expert system for recipe management and color measurement. The Windows based software calculates the best and most cost-effective recipe. In laboratory as well as in production it offers the ideal treatment and correct dye program selection. Colorimetric control within different production steps and calculation of additions for addition treatments supplement its functionality. These optimized workflows influence and optimize the consumption of the resources used.

EnergyMaster collects the energy consumption of the whole factory and supports in optimizing the energy use. E. g. electricity, gas, compressed air, water, and steam consumption are target for further analysis. Together with the production data, reports can show the usage per meter, kg, etc. Optimization results in a better carbon footprint and saves a lot of costs.

Sedo Treepoint systems offer many innovative features for your Smart Factory and together with intelligent software solutions the complete textile supply chain becomes an intelligent production. All solutions help to improve sustainability and reduce costs while increasing productivity and efficiency.

Sedo Treepoint will exhibit smart technologies for technical textile production

As technical textile production becomes increasingly complex and sustainability requirements intensify, digital integration is evolving from an efficiency tool into a strategic task. At Techtextil 2026 (April 21–24, Frankfurt am Main), Sedo Treepoint will present smart digital systems designed to address the demanding production environments of technical textile manufacturing. The company’s focus will be on practical technologies that enhance process transparency, reproducibility, and efficient resource use. Visitors will meet Sedo Treepoint in Hall 12, Booth D05.

Sedo Treepoint introduces new textile automation solutions at ITMA ASIA 2025 in Singapore

At ITMA ASIA 2025 in Hall 8, Booth B410, Sedo Treepoint will showcase its latest innovations in textile automation and digitalization. Embracing the theme “Textile solutions together,” Sedo Treepoint, together with its Vandewiele Group partners, will present solutions designed to increase efficiency, quality and sustainability in textile production.

Sedo Treepoint publishes comprehensive 11-point plan to enhance textile factory performance

Sedo Treepoint has announced a comprehensive 11-point plan designed to significantly enhance the performance and efficiency of textile factories worldwide. With over 45 years of industry leadership in automation and software for dyeing and finishing, Sedo Treepoint offers detailed insights and practical steps to optimize production, ensure quality, and drive sustainability.

RE&UP’s Next-Gen Cotton fibers power Zalando private label t-shirt collection crafted from innovative recycled textiles

RE&UP Recycling Technologies’ Next-Gen Cotton powers a new collection from Zalando’s private labels, marking a step forward in bringing textile-to-textile recycled fibers into commercial fashion production. Launching on Zalando in August, the collection comprises five t-shirts across YOURTURN by Zalando and Even&Odd by Zalando, made from a circular-knit fabric blending 80% organic cotton with 20% RE&UP Next-Gen Cotton — textile-to-textile recycled fiber produced from textile waste. This is the first time RE&UP's recycled fibers feature in Zalando's private label assortment.

Heimtextil Trends 27/28: ‘Home-Maxxing’ between performance and respite

Sleep better, recover faster, live more efficiently: the desire for optimisation has long since reached our homes. Under the title ‘Home-Maxxing – The Performance of Everyday Living’, Heimtextil Trends 27/28 show how our relationship with efficiency-driven thinking and technology is influencing the design of spaces and textiles. The more sleep, wellness, routines, materials and spaces are optimised, the stronger the desire for a home that does not demand even more of us.

Driving circularity with Uster Recycled Fiber Matrix

The textile industry’s commitment to circularity continues to accelerate, and mechanical recycling is viewed as a targeted approach to cutting textile waste and its environmental impact. At the forefront of this drive, Uster has developed the Recycled Fiber Matrix, a two-dimensional assessment of mechanically recycled fibers to guide optimum processing and end-uses.

Mimaki advances DTF productivity and stability with new TxF330-800

Mimaki Europe, a leading manufacturer of industrial inkjet printers and cutting plotters, announces the TxF330-800, its new direct-to-film (DTF) printer. Designed to support stable, high-quality garment decoration in demanding print environments, the system combines automated maintenance, expanded white ink capacity and advanced production capabilities to streamline workflow.