[pageLogInLogOut]

#Dyeing, Drying, Finishing

Quality, efficiency and good service - this is what makes BRÜCKNER successful in Turkey

Production manager Harun Bilginer © 2021 Brückner
The Turkish family-owned company ARIKAN Mensucat Industry and Trade Inc. was founded in 1993 and is located in Kahramanmara, one of the southernmost cities of the country. In addition to the classic textile trade, ARIKAN was involved in yarn production in the early days and initially built a spinning mill. This was followed in 2008 by the construction of a knitting mill, and a few years later the dyeing and finishing divisions were added. In the Kahramanmara? region, ARIKAN is one of the oldest companies ever and has been developed into a solid and successful textile company.

Today, the family-owned company employs around 1,500 people and finishes around 55 tons of knitwear every day. In addition to many well-known Turkish fashion manufacturers, ARIKAN also supplies international manufacturers in Europe, Russia, the Gulf States and other leading international markets. 

One of the many BRÜCKNER stenters at ARIKAN  © 2021 Brückner
One of the many BRÜCKNER stenters at ARIKAN © 2021 Brückner


The German machinery manufacturer BRÜCKNER supported the Turkish company from the very beginning. From the foundation of the dyeing and finishing plant, BRÜCKNER supplied three stenters for the finishing of the high-quality knitted fabric in 2014. Two more lines followed in 2016. For decades, BRÜCKNER has been the market leader for the finishing of knitted fabric. Especially for very fine and elastic fabric, special line configurations and technological know-how are necessary to be able to produce a high-quality end product. During the drying and heat-setting process, for example, extremely accurate and uniform temperature distribution over the entire length and width of the dryer is essential. In the BRÜCKNER stenter this is achieved, among other things, by the alternating arrangement of the thermal zones every 1.5 meters and by the proven split-flow air system. 

Besides these advantages, the machine operators at ARIKAN also appreciate the easy control of BRÜCKNER lines. The visualization is intuitively designed and offers many intelligent auxiliary systems for an optimized production process. Also the very good accessibility of the line for maintenance and cleaning is also a plus point. In addition, significant energy savings can be achieved with just a few changes to the machine parameters. Sophisticated software provides machine operators with valuable information for this purpose.


With all these advantages, the decision for another BRÜCKNER stenter in 2019 was an easy one to make. The management at ARIKAN attaches great importance to energy saving, especially in the fabric finishing department. The drying process is one of the most energy-intensive in the entire process chain, therefore the biggest savings can be made here. These have a direct impact on the manufacturing costs of the textiles and thus on competitiveness in the market. In the meantime, talks are already in progress for another BRÜCKNER line which will include a very special feature: a combined heating system for the dryer. For many customers - and so also for ARIKAN in Turkey - e.g. steam energy is available free or very cheap. With the combined heating system developed by BRÜCKNER it is possible to use this steam energy for heating up the dryer and thus to achieve significant savings. If the available steam is not sufficient for a running process, it is automatically switched over to gas heating. This mode of operation does not only have an effect on the energy costs, but also makes a considerable contribution to environmental protection. BRÜCKNER has been offering combined heating systems for many years, depending on the customer's requirements and the available resources. Thanks to the development over many years of these combined systems and to a sophisticated software, the changeover to another energy source is nowadays carried out without any problems.

During the last years a close friendship has developed between the companies ARIKAN and BRÜCKNER. The Turkish BRÜCKNER agency INTER TEKSTIL is always the link between the two family companies.

Production manager Harun Bilginer (Photo) is very satisfied: "The BRÜCKNER brand stands for quality, efficiency and innovation. What we also appreciate very much is the open exchange, the professional contact with customers and the good service. Of course, the representative in many countries also plays an important role. With INTER TEKSTIL BRÜCKNER is well represented in Turkey. We feel very well looked after, they simply take care. This is not a matter of course."

Soon when the latest line has been put into operation, a total of seven BRÜCKNER stenters will produce high-quality knitwear for the whole world at ARIKAN.



More News from BRÜCKNER Textile Technologies GmbH & Co. KG

#ITMA Asia + CITME 2026

Brückner showcases sustainable technologies for the future of textile finishing at ITMA ASIA 2026

With rising energy costs, increasing environmental requirements, and growing competitive pressure, textile manufacturers worldwide are facing the challenge of making their production processes both more sustainable and more cost-effective. As one of the world's leading specialists in textile finishing machinery, Brückner will present innovative solutions and advanced production technologies at ITMA ASIA 2026 in Shanghai. These technologies can play a key role in significantly reducing both energy consumption and emissions.

#Dyeing, Drying, Finishing

Brazilian market leader Cedro Têxtil focuses on greater efficiency, sustainability, and product quality with Brückner

After more than 150 years of company history, Cedro Têxtil is once again embracing the challenges of a changing industry. Widely recognized as the largest manufacturer of workwear fabrics in Latin America, the Brazilian textile company continues to invest in the modernization of its production facilities. A key milestone in this process was the decision to install a state-of-the-art Brückner stenter frame just over a year ago.

#Dyeing, Drying, Finishing

Ready for the future: PI Cottex chooses Brückner again for reliable quality and efficiency

PI Cottex, based in Ludhiana in the Indian state of Punjab, has developed into a leading manufacturer of high-quality knitted fabrics in recent years. Thanks to consistent vertical integration, modern pro-duction technologies and a clear focus on quality, the company supplies renowned national and inter-national clothing brands. In this interview, the team at PI Cottex talks to Brückner about its market strategy, future growth plans and its long-standing partnership with the German premium machinery manufacturer.

#Dyeing, Drying, Finishing

Tradition and Innovation – Phoenox Textiles Ltd. relies on state-of-the-art carpet back-coating line from Brückner

For more than 70 years, Phoenox Textiles Ltd. has been synonymous with quality, reliability, and inno-vation in the textile industry. Founded in 1954 in Huddersfield (Yorkshire, UK), a region with a long tradition in textiles, this family-owned business has continued to evolve without losing sight of its roots. Today, in its fourth generation under the leadership of the Mosley family, Phoenox successfully combines decades of experience with a clear, forward-looking corporate strategy.

More News on Dyeing, Drying, Finishing

Latest News

#Textile processing

YKK Bangladesh celebrates 25 years of fastening production and business development

YKK Bangladesh Pte. Ltd., a subsidiary of Japanese fastening manufacturer YKK Corporation, has celebrated its 25th anniversary with a commemorative ceremony in Dhaka on November 8, 2026. Since its establishment in November 2000, the company has expanded its manufacturing capacity and business operations alongside the growth of Bangladesh's apparel industry.

#ITMA Asia + CITME 2026

Murata Machinery to showcase AIcone winding and high-speed VORTEX spinning at ITMA ASIA 2026

Japanese textile machinery manufacturer Murata Machinery will present its PROCESS CONER AIcone automatic winder and VORTEX 870 EX spinning machine at ITMA ASIA + CITME 2026. Under the theme “Right Choice, Bright Future”, the company will highlight technologies for efficient yarn manufacturing, combining energy-saving winding solutions with high-speed air-jet spinning. Visitors can meet Murata Machinery in Hall 5, Booths E01 and E02.

#ITMA Asia + CITME 2026

DORNIER highlights airbag, filtration and composite weaving technologies at ITMA ASIA 2026

Lindauer DORNIER will present its latest developments in air-jet and rapier weaving technology for technical textiles at ITMA ASIA + CITME 2026. The German machinery manufacturer will focus on the reliable and efficient production of airbag fabrics, high-density filters and reinforcement textiles for fibre-reinforced composites. Alongside its A2 air-jet and P2 rapier weaving machines, DORNIER will highlight its TRITOS FLEX technology for complex 3D composite preforms, retrofit solutions and expanded service capabilities in Asia. The company will exhibit in Hall 3, Stand E02.

#Retail & Brands

Marks & Spencer expands across Asia Pacific through partnership with Global Fashion Group

Marks & Spencer (M&S) and Global Fashion Group (GFG) have announced a strategic partnership to expand the British retailer's fashion business across Asia Pacific. M&S has launched on Southeast Asian fashion platform ZALORA and plans to enter THE ICONIC in Australia and New Zealand in early 2027. The agreement also introduces regional fulfilment for Australian M&S.com orders, enabling faster deliveries and returns while supporting a capital-light international growth strategy.

TOP