[pageLogInLogOut]

#Dyeing, Drying, Finishing

Monforts says goodbye to Klaus Heinrichs

After almost 30 years with the company, Monforts Vice-President Klaus Heinrichs is to retire at the end of May.

A very well-known and respected figure in the industry, Klaus began working in marketing for the company in 1992.

“From the very beginning until today Klaus used his great flair and networking skills to secure and improve the company’s international presence and public relations, especially at seven successive ITMA textile machinery exhibitions, beginning with the show in Milan in 1995,” said Monforts Marketing Manager Nicole Croonenbroek. “Later, he also took care of customer service, sales administration and exports in his uniquely calm and quietly-spoken style.” 

Klaus Heinrichs © 2021 Monforts
Klaus Heinrichs © 2021 Monforts





“He has always been a guarantor of successful product launches for Monforts technical and technological highlights such as the TwinAir principle of independent airflow regulation, the Hercules LTM stenter chain, the Econtrol® dyeing technology or the Montex®Coat device - to mention only a few.”

Klaus has also been active on the VDMA’s Exhibition and Marketing Committee since 1993, which he chaired from 2005 to 2008. 

“Klaus always enriched the industry discussions with practical and future-oriented proposals and thus also advanced ITMA,” said Thomas Waldmann, Managing Director of the VDMA Textile Machinery Association. “We sincerely thank him and wish him all the best for this new chapter of his life.”

“We will miss Klaus as a colleague and as a manager because of his skills, character and his engagement,” added Monforts Managing Director Stefan Flöth. “He truly represents the Monforts commitment to our customers to be helpful, accurate, fast and reliable, and we keep him as a friend. I’m sure the many friends he made throughout the world during his career with the company will join us in wishing him all the best for his next phase of life together with his family.”

* Econtrol is a registered trademark of Dystar Colours Distribution GmbH.


More News from A. Monforts Textilmaschinen GmbH & Co. KG

#Dyeing, Drying, Finishing

AEI reaps the benefits of all-electric new Monforts range

The impact of the rising cost of energy on the textile industry has been well documented, with some European countries paying up to seven times more to run their manufacturing operations than in other regions of the world.

#India ITME 2026

Monforts ready for India’s next phase of textile growth at ITME 2026

Advanced finishing, coating and energy-efficient processing will be highlighted by Monforts at India ITME 2026, as the region’s textile manufacturers increasingly look beyond volume production towards higher-value fabrics. The German finishing machinery specialist sees considerable potential in India as investment continues in conventional apparel and home textiles alongside rapidly developing markets for technical textiles, activewear, sportswear, filtration and automotive applications.

#IGATEX 2026

Impressive savings with Monforts’ stand-alone air/air heat exchanger

Having maintained an 80% share of Pakistan’s new stenter market with MONTEX machines for over 20 years and additionally now installed over 40 THERMEX dyeing ranges in the country, Monforts will highlight the benefits of its latest Universal Energy Tower at IGATEX 2026.

#Dyeing, Drying, Finishing

Turning new ideas into industrial reality at the Monforts ATC

The Monforts Advanced Technology Centre (ATC), initially opened in 2103 and subsequently expanded, continues to be an invaluable resource to customers from around the world in achieving new standards in fabric finishing.

More News on Dyeing, Drying, Finishing

#Dyeing, Drying, Finishing

Nine Orthopac RXVMC-20 systems: Y.R.C. Textile relies on Mahlo for uncompromising fabric quality

In 2026, Y.R.C. Textile invested in nine Mahlo Orthopac RXVMC-20 straightening systems, a clear vote of confidence in technology engineered for textiles with high distortion dynamics and the tightest quality demands.

#ITMA Asia + CITME 2026

Brückner showcases sustainable technologies for the future of textile finishing at ITMA ASIA 2026

With rising energy costs, increasing environmental requirements, and growing competitive pressure, textile manufacturers worldwide are facing the challenge of making their production processes both more sustainable and more cost-effective. As one of the world's leading specialists in textile finishing machinery, Brückner will present innovative solutions and advanced production technologies at ITMA ASIA 2026 in Shanghai. These technologies can play a key role in significantly reducing both energy consumption and emissions.

#ITMA Asia + CITME 2026

Mahlo introduces AI-supported Orthopac RVMC-20 plus at ITMA Asia 2026

From November 20 to 24, 2026, Mahlo GmbH + Co. KG will present its system portfolio for the textile industry at ITMA Asia in Shanghai. Together with its local sales and service partner Kuantex and Mahlo China, the Bavarian technology specialist will demonstrate at Booth C22 in Hall 7.1 how intelligent measurement and control technology can improve the quality and efficiency of textile production processes. The spotlight will be on the new Orthopac RVMC-20 plus, which combines precise weft straightening with fully integrated process control.

Latest News

#India ITME 2026

India’s textile industry: Current position, growth targets and industrial development

With ambitious export targets, major investments in manufacturing infrastructure and new international trade agreements, India is pursuing a comprehensive development strategy for its textile and apparel industry. An overview of the industry’s current position, government initiatives, progress achieved and challenges ahead.

#Weaving

“A complex design is only useful if the machine can reproduce it consistently”

Andreas Schnabel, Head of R&D for Technical Weaving Systems at Stäubli, discusses how 3D weaving can create textile reinforcements tailored to the loads within a composite component, where near-net-shape weaving can reduce processing steps and material waste, and what it takes to produce complex structures reliably and economically. He also explains how manufacturers can adapt Stäubli’s modular TF weaving platforms to new applications and how the company’s centre of excellence in Bayreuth supports the transition from research to industrial production.

#India ITME 2026

India ITME 2026: Textile technology meets India's investment ambitions

With ambitious growth targets, government incentive programmes and industrial development initiatives already underway, India is preparing for the next stage of its textile transformation. Against this backdrop, the 12th India ITME, taking place in Greater Noida from 4 to 9 December 2026, arrives at a particularly important moment for machinery manufacturers and textile producers alike.

#ITMA Asia + CITME 2026

ITMA ASIA + CITME 2026: Shanghai prepares for a record edition

With record demand for exhibition space, a strong presence of international technology suppliers and growing interest in automation and intelligent manufacturing, ITMA ASIA + CITME 2026 will provide an important overview of technological developments in the world’s largest textile producing region.

TOP