Dyeing, Drying, Finishing

2018-04-11

BRÜCKNER sustains position as market leader in the field of machines for electronic glass

The rapid developments in the field of electronics lead to an ever increasing demand for so-called electronic glass. This glass serves as basic material for printed circuit boards and is used due to its excellent dielectric characteristics with up to 16 stacked layers.

The users of modern communication and semiconductor technology expect increasing capacity with lower weight. In reverse this leads to a rapid increase of the demand for electronic glass of the high-est possible quality. The trend towards lower and lower weights per m² is unmistakable. Five years ago a surface weight of 48 g/m² was the standard for producers of electronic glass but in the mean-time the standard is approx. 23 g/m². The leading producers in this field dare already to produce and use woven glass with a weight of 12 g/m².

The extreme yarn and fiber fineness presents however a certain limit for the processing of these light woven fabrics. Currently it cannot be assessed if this trend can and will continue. These woven fabrics are disputed among doctors and biologists. Broken filaments of micro dimensions, which do inevitably occur during the processing of the glass fabric, get with the inhaled air into the lungs and from there possibly into the blood circulation. 

The extremely low fabric weight is however an enormous challenge for the supplier of the machinery. The highest possible precision when controlling minimum tractions, an absolute parallelism in the alignment of guide rollers and fabric accumulators, the use of special acid-resisting stainless steel and highly effective fabric path cleaning technology are just as obligatory as a minimum consumption of electrical energy and process heat and a highly effective exhaust air cleaning according to the latest state of the art.

Pic 1: Example of a BRÜCKNER line for the continuous desizing of glass fabric including exhaust air cleaning (c) 2018 BRÜCKNER
Pic 1: Example of a BRÜCKNER line for the continuous desizing of glass fabric including exhaust air cleaning (c) 2018 BRÜCKNER





BRÜCKNER meets these challenges for years and continuously develops its lines for continuous desiz-ing and finishing. As a consequence almost all well-known producers of electronic glass have a BRÜCKNER glass fabric finishing line in their plants. These lines produce with the highest possible reliability on more than 330 days a year and round the clock with fabric speeds of up to 120 m/min.

This reliability, the high productivity and the possibility to process not only extremely light but also a wide range of fabric weights with the required quality makes BRÜCKNER a dependable partner for the producers of electronic glass. Therefore it is the rule that BRÜCKNER is awarded the contract also in case of follow-up orders. 

The orders placed with BRÜCKNER during the last 12 months for such lines exceeded by far all expec-tations. Several customers in Taiwan and China ordered glass fabric finishing lines, among them con-tinuous desizing lines and finishing lines for extremely light fabric. Some of the finishing lines were ordered for the universal use with light and heavier fabric weights from 23 to 202 g/m². With these lines BRÜCKNER proves again their market leadership in this particular segment.

Pic 2: Example of a BRÜCKNER line for the finishing of extremely light glass fabric (c) 2018 BRÜCKNER
Pic 2: Example of a BRÜCKNER line for the finishing of extremely light glass fabric (c) 2018 BRÜCKNER



Tweet
Related News
Latest News Dyeing, Drying, Finishing
More News from BRÜCKNER Textile Technologies GmbH & Co. KG
Latest News