[pageLogInLogOut]

#Denim

ISKO becomes the first Turkish mill awarded with the prestigious OEKO-TEX® STeP certification.

After becoming the first company in the world awarded both the rigorous EU Ecolabel and Nordic Swan Ecolabel, ISKO has recently reached another important milestone in its long-standing responsible journey: it has become the first Turkish denim manufacturer awarded with STeP by OEKO-TEX® modular certification system.

Fostering Responsible InnovationTM through the development and implementation of best practices, the company fulfilled the certification’s strict requirements, relying on six different modules to assess important areas of production.

The certification results in a powerful tool to implement the company’s Responsible InnovationTM approach. This mindful and holistic vision tackles environmental and social responsibility to reach the goal of a 100% sustainable and ethical denim production, based on three main pillars – creativity, competence and citizenship.

It is within this already responsible setting that this certification highlights where even better choices can be made, aiming at implementing responsible production processes in the long term by assessing six different areas of production conditions. These are Chemicals management, Environmental performance, Environmental management, Social responsibility, Quality management and Health protection and safety at work: together they provide an overall analysis that documents ISKO’s responsible commitment in a clear and complete way.


STeP integrates the independent verification system DETOX TO ZERO by OEKO-TEX®, allowing to determine the status of chemicals management and wastewater quality in compliance with the goals of the Greenpeace Detox Campaign.

“Responsibility and innovations go hand in hand, at ISKO,” explained Senior Sustainability and CSR Executive Ebru Ozkucuk Guler, “To be awarded with such a prestigious certification is proof that one has to look at the big picture: sustainable actions need to involve and take into account the entire value chain, in the long run, considering not only production steps but also the development of a healthy and safe work environment. It is the perfect ending to a very fulfilling year, we are eager to see what 2020 will bring.”


More News from TEXDATA International

#ITM 2026

ITM 2026: The new geography of textile production

New production hubs are emerging across North Africa and Central Asia, while Türkiye is accelerating its transformation toward higher-value, technology-driven and more sustainable textile manufacturing.

#Research & Development

“Production is a product”

From technical textiles and AI-driven robotics to the limitations of textile circularity: Professor Dr Thomas Gries looks back on more than two decades of development at ITA Aachen. In the interview, he explains why production technology remains a decisive success factor, discusses international collaborations and innovation ecosystems, and shares his views on the transformation of production landscapes and the challenges facing an increasingly regulated industry.

#Knitting & Hosiery

“We need to move away from the price trap and return to a value-driven mindset.”

With its new Textile Innovation Center, KARL MAYER is sending a strong signal for innovation, collaboration, and the future of textile applications. In this interview, Karl Josef Mayer discusses new opportunities in warp knitting, the processing of staple fibres, recycling, the changing role of machinery manufacturers, and why the textile industry must once again focus more strongly on the value of textiles. by Oliver Schmidt

#Associations

“Innovation, resilience and international experience remain the great strengths of the Swiss textile machinery industry”

Geopolitical uncertainty, growing competitive pressure from China, new free trade agreements and the shift towards a circular economy are currently reshaping the global textile industry. In this interview, Cornelia Buchwalder discusses the current mood within the Swiss textile machinery sector, the industry’s distinctive innovative strength, new market opportunities in India and Asia, and the technological trends that could shape the upcoming trade fair cycle leading up to ITMA 2027.

More News on Denim

#Textile processing

Jeanologia and Sue Barrett explore new interpretations of camouflage in COMMON GROUND

Jeanologia has collaborated with Sue Barrett, founder of Denim Forum, to create COMMON GROUND, a new denim collection that reinterprets camouflage through nature-inspired patterns, vintage garments and modern finishing technologies. Developed as part of Jeanologia’s Denim Métiers initiative, the project combines archival references and creative experimentation with laser and ozone technologies to explore new possibilities in contemporary denim design.

#Recycling / Circular Economy

Blue Jeans Go Green celebrates 20 years of denim recycling with more than six million items collected

Cotton Incorporated is celebrating the 20th anniversary of its Blue Jeans Go Green™ denim recycling program. Since its launch in 2006, the initiative has collected more than six million denim items, diverted over 3,000 tons of textile waste from landfills and enabled the production of more than 12 million square feet of denim-based insulation. What began as a college campus collection drive has developed into a nationwide recycling initiative involving consumers, retailers, schools and community organisations across the United States.

#Industry 4.0 / Digitalization

Jeanologia and BCome connect factory data with Life Cycle Assessment and Digital Product Passports

A new white paper by EIM by Jeanologia and BCome demonstrates how primary environmental data from denim finishing processes can be integrated into a garment's Life Cycle Assessment (LCA) and prepared for use in a Digital Product Passport (DPP). A comparative case study highlights significant improvements at the production stage while also showing how these translate into the environmental performance of the finished garment.

#Denim

Inside the Making connects denim and sportswear supply chains at Ecomondo 2026

Six European companies are joining forces at Ecomondo 2026 in Rimini to demonstrate how different stages of denim and sportswear production are interconnected. The new initiative, Inside the Making, highlights the importance of cooperation across the textile supply chain in addressing sustainability challenges, from reducing resource consumption to improving transparency and the reliability of environmental claims.

Latest News

#

Better Cotton Initiative partners with FarmRaise to simplify data management for US cotton growers

The Better Cotton Initiative (BCI) has announced a partnership with agricultural technology company FarmRaise to simplify data collection, reporting and program participation for cotton growers in the United States. The digital platform will help farmers manage certification requirements, document agricultural practices and track progress towards regenerative agriculture goals while reducing administrative work. The solution is scheduled to become available in January 2027.

#Research & Development

ITA spin-off TERNAfil wins third place at KUER.NRW 2026 with MAXCarbon technology

The Aachen-based ITA spin-off TERNAfil GmbH has secured third place in the KUER.NRW Business Plan Competition 2026 with MAXCarbon, an innovative carbon-ceramic hybrid fibre developed for applications in the hydrogen economy. The technology combines the mechanical properties of carbon fibres with the thermal and corrosion resistance of ceramic materials.

#Heimtextil 2027

Heimtextil 2027 strengthens its sleep segment with leading brands and new international suppliers

From high-quality mattresses and innovative sleep systems to international sourcing solutions, Heimtextil 2027 brings together the full diversity of the sleep market. Established brands will showcase their products in Hall 4.0. With Sleep & Meet, Heimtextil continues its collaboration with the German Mattress Industry Association (Fachverband Matratzen-Industrie e. V.).

#Spinning

Barmag’s single-stage Bi-Shrinkage concept impresses with yarn quality and efficiency

The Indian company Garden Silk Mills Pvt. Ltd. adopts Barmag's new single-stage Bi-Shrinkage Yarn (BSY) spinning concept based on WINGS FDY PLUS eco. The systems, which have been in operation for about a year, deliver excellent yarn quality with very good productivity.

TOP