#Associations

2024-08-02

Italian textile technology at CAITME 2024

At the upcoming edition of CAITME, to be held in Tashkent, Uzbekistan from September 11 to September 14, 2024, 16 Italian textile machinery manufacturers will exhibit in the common area set up by the Italian Trade Agency and ACIMIT.

ACIMIT President Alessandro Zucchi welcomed the President of Uzbekistan Shavkat Mirziyoyev at ITMA 2023 in Milan © 2024 ACIMIT

All these companies are ACIMIT’s associated members: Bonino, Brazzoli, Carù, Erhardt+Leimer, Guarneri Technology, Ima, Laip. Lgl, Martex, Mei, Mesdan, Pinter Caipo Italia, Pugi Group, Sicam, Stalam, Ugolini.

Uzbekistan is one of the largest producers and exporters of cotton and its textile industry is a relevant driver for the national economy. Thanks to the raw material’s availability and low production costs the business conditions are favourable for the development of the local industry. The upgrading of installed equipment is considered a step to achieve this goal.

Italian textile technology is well known by the Uzbek textile companies. In 2023, Italian sales in Uzbekistan amounted to 21 million euro. Among the Italian machines most in demand by Uzbek textile companies are weaving machines (32% of total 2023 Italian exports), followed by finishing machines (30%), spinning machines (17%), knitting machines (14%) and accessories (7%). At CAITME Italian exhibitors will show the most advanced technology applied to the textile sector, offering proper solutions in terms of efficiency, costs saving and sustainability.

Italian textile machinery orders show quarterly recovery in Q2 2026

In the period between April and June 2026, order intake for Italian textile machinery manufacturers showed mixed but encouraging signals for the second half of the year. The order index at constant prices stood at 46.6 points (taking 2021=100 as the base year), showing a slight decrease of 3% compared to the same quarter of 2025. This trend was largely due to the contraction recorded in the domestic market, which fell by 25% compared to the corresponding period of the previous year.

Textile machinery: Italian technology charts the course for revival

Operating in a scenario characterized by geopolitical instability, slowing industrial investments, and new protectionist pressures. This is the main challenge for the Italian textile machinery industry that emerged during the General Assembly of ACIMIT (Association of Italian Textile Machinery Manufacturers), held today in Milan at the Shareholders’ Hall of Palazzo Edison.

Bangladesh: Italian textile machinery mission stops in Dhaka and Chittagong

Technological upgrading and the transition toward higher value-added production are driving the new Italian industrial mission to Bangladesh. This year, the mission will split between the country’s two main manufacturing hubs, where Italian manufacturers will meet the leaders of the local textile supply chain in two strategic stages: July 7th in Dhaka and July 9th in Chittagong.

Mongolia: Workshop on Italian textile technologies kicks off in Ulaanbaatar

The workshop dedicated to Italian textile technologies will kick off in Ulaanbaatar from 21 to 23 June 2026. Focused on the most advanced innovative solutions for the textile industry, the initiative will bring together 13 Italian textile machinery manufacturers, confirming the growing interest in strengthening industrial cooperation between the two countries and highlighting Mongolia’s strategic importance for Italian textile machinery producers.

Business situation weakens slightly, but the industry stays cautiously optimistic

The International Textile Manufacturers Federation (ITMF) has published the results of its 39th Global Textile Industry Survey (GTIS), conducted from 14 to 22 July 2026 among companies along the entire global textile value chain. Worldwide, 10% of participants rated their business situation as good, 53% as satisfactory and 37% as bad — a balance of -26pp, down from -17pp in May but still well above the 2023 lows. All regions are now in negative territory, from South Asia at -3pp to North & Central America at -58pp.

Febratex 2026 to be the largest edition of the leading textile trade fair in the Americas with 10 exhibition halls

Febratex 2026 will be the largest edition in the history of the leading textile trade fair in the Americas. Dedicated to the textile and apparel manufacturing industries, the event will take place from August 18–21, 2026, in Blumenau, Santa Catarina, Brazil, with a strong focus on technology, sustainability, and business generation.

Cotton Brazil Dialogues field trip brings international stakeholders closer to Brazil’s cotton production chain

How do you build trust across the global textile value chain? By opening the farm gates. This is the principle behind the Cotton Brazil Dialogues. At the end of July, the programme welcomed its first group of international participants for a five-day immersion into Brazilian cotton production, combining field visits with technical workshops to showcase the quality, sustainability, innovation and traceability behind one of the world’s leading cotton origins.

ITMA ASIA + CITME 2026 Shanghai showcases intelligent and sustainable manufacturing

From 20 to 24 November 2026, the textile machinery industry will gather in Shanghai for ITMA ASIA + CITME 2026, Asia’s leading business platform for textile machinery, to be held at the National Exhibition and Convention Center (Shanghai). The exhibition will occupy seven halls, with a total gross exhibition area of about 180,000 square metres. The exhibition has expanded by 10% over the last edition which reflects the continued industry interest in the region.