[pageLogInLogOut]

#Associations

Dr. Janpeter Horn new Chairperson of Textile Machinery Association

Caption (f. l. t. r.): Chairperson and Vice Chairpersons of the VDMA Textile Machinery: Verena Thies, Dr. Janpeter Horn, Regina Brückner. © 2022 VDMA
Dr. Janpeter Horn, Managing Director of August Herzog Maschinenfabrik, is the new Chairperson of the VDMA Textile Machinery. Dr. Horn was elected at the members’ meeting of the Association in Leonberg. The new Executive Board is completed with Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik and Ms. Verena Thies, Managing Shareholder of Thies Textilmaschinen, who were elected as Vice Chairpersons.

After his election, Dr. Horn stated: “I am pleased to have Ms. Brückner and Ms. Thies by my side. Both have been serving on the Executive Board of the VDMA Textile Machinery as well as the European Committee of Textile Machinery Manufacturers CEMATEX for many years. With this team, we are well prepared to effectively represent the interests of the industry at national and international level.”

Based in Oldenburg, Northern Germany, Herzog is a company with a long tradition and at the same time the most innovative developer and manufacturer of braiding and winding machinery. Worldwide references in braiding and winding technique confirm the company’s technical and quality leadership.


The new Executive Board of the VDMA Textile Machinery for the legislative period until 2026 is composed of:

Dr. Janpeter Horn (Chairperson), August Herzog Maschinenfabrik

Regina Brückner (Vice Chairperson), BRÜCKNER Trockentechnik

Verena Thies (Vice Chairperson), THIES

Peter D. Dornier, Lindauer DORNIER

Stefan Flöth, A. Monforts Textilmaschinen

Arno Gärtner, KARL MAYER STOLL Textilmaschinenfabrik

Markus Kleindorp, MEMMINGER-IRO

Andreas Lukas, ANDRITZ Küsters

Benjamin Mayer, Mayer & Cie.

Dr. Jörg Morgner, Temafa Maschinenfabrik

Benjamin Reiners, Reiners + Fürst

Dr. Uwe Rondé, Saurer Group

Eric Schöller, Groz-Beckert

Georg Stausberg, Oerlikon Textile

Heinrich Trützschler, Trützschler Group




More News from VDMA Fachverband Textilmaschinen

#ITMA Asia + CITME Singapore 2025

VDMA member companies on display at ITMA ASIA

ITMA ASIA + CITME end of October in Singapore will see a strong participation of around 70 VDMA member companies. They will cover nearly all different machinery chapters along the textile value chain including spinning and man-made fibres, nonwovens, weaving, braiding, knitting & warp knitting, finishing & dyeing as well as technologies for textile recycling and processing of recycled material. VDMA initiated a German Pavilion with two group stands (spinning in hall 4 and finishing in hall 7) with a total of 30 exhibitors.

#ITMA Asia + CITME 2024

Smart technologies for green textile production

With 42 exhibiting member companies, ITMA ASIA + CITME 2024 is once again marked by a strong presence of VDMA companies. They cover nearly all different machinery chapters with a focus on spinning and man-made fibers, nonwovens, weaving, braiding, knitting & warp knitting, finishing & dyeing as well as technologies for textile recycling and processing of recycled material. In total, the German participation at the fair is the largest from outside China.

#ITMA Asia + CITME 2024

VDMA members at ITMA ASIA in Shanghai

With 49 exhibiting member companies, ITMA ASIA + CITME, taking place October 14 – 19 in Shanghai, will see again a strong VDMA participation. German exhibitors make up the largest foreign presence at the trade fair.

#Associations

VDMA members to participate in CAITME expo­

CAITME, taking place from 11 to 14 September in Tashkent, Uzbekistan, will see a strong participation of VDMA member companies. About 25 VDMA members will take part in the event. Among the numerous VDMA companies present at the trade fair with their own booth or through agents, 13 companies will be exhibiting in the area of the official German Pavilion, organised by the German Federal Ministry for Economic Affairs and Climate Action and initiated by VDMA: Brückner Textile Technologies, Erbatech, Georg Sahm, Groz-Beckert, Heusch, KARL MAYER STOLL Textilmaschinenfabrik, KURIS Spezialmaschinen, Lindauer DORNIER, Oerlikon Textile, Stäubli Bayreuth, STC Spinnzwirn, THIES, Xetma Vollenweider.

More News on Associations

Latest News

#Recycling / Circular Economy

textile.4U publishes special edition “Top 100 Textile Recycling Companies 2025”

With a comprehensive 176-page special edition, textile.4U is dedicating its latest issue entirely to one of the most dynamic and influential topics in today’s textile industry: textile recycling. The new issue, published exclusively in high-quality print, presents the Top 100 textile recycling companies researched and selected by TexData – organizations that already play a key role in the transition to circular textiles or are expected to have a significant impact in the near future.

#ITMA Asia + CITME Singapore 2025

KARL MAYER is launching two machines that set new standards in performance and cost-effectiveness

At this year's ITMA ASIA + CITME, KARL MAYER is exhibiting two advanced developments in the field of tricot machines. Both newcomers expand the portfolio with highly practical solutions for increased efficiency and cost-effective production – making the exhibition booth once again a focal point for more than just the warp knitting industry.

#ITMA Asia + CITME Singapore 2025

Uster presents novelties at ITMA Asia + CITME 2025

There’s news from Uster Technologies to be announced for the industry’s upcoming event in Singapore. The Uster 360Q universe is growing with new products, solutions and services. Innovation developments can also be recorded in the fields of man-made fiber testing and fabric inspection. Uster innovations address the industry’s trending topics as mill management and process control, optimization of delivered fabric quality and yield.

#Textiles & Apparel / Garment

Nike unites innovation, design and product teams to accelerate athlete-centered innovation

Nike, Jordan Brand and Converse are joining forces under a new, athlete-focused creation structure aimed at accelerating innovation and driving growth across NIKE, Inc. The new setup unites the Innovation, Design and Product teams from all three brands into a single “creation engine” that will enable greater sharing of insights, technology and manufacturing methods throughout the innovation process. This integration is part of Nike’s new Sport Offense strategy and is designed to enhance the creation of products that help athletes perform at their best.

TOP